正丁基苝四羧酸二酰亚胺的晶型和性能研究

文章合成了N,N'-二正丁基苝四羧酸二酰亚胺,并纯化、调晶,进行了IR、元素分析、X射线等测定.分析该化合物在DMF中的紫外光谱(最大吸收波长524.80 nm)、荧光光谱(最大发射波长539.0 nm)、Stokes位移(数值15 nm)等光谱性质.在400～700 nm范围内,α晶型薄膜紫外-可见吸收出现很强的吸收峰,且由β型变为α型,最大吸收波长有明显的红移(545 nm变为580 nm).X射线粉末衍射也反映出α晶型的2θ在26.0°处衍射峰CPS为2 508,β型在25.2°为1 891.α,β晶型作为电荷产生材料制得的功能分离型有机光导体,在光源滤波波长λ=532 nm曝光下,测得含α,β感光体达到饱和电位的时间分别为46,93.98 s,光衰电位(5.3千伏电压负充电电晕,1～2 s后的表面电位)分别为727和525 V,半衰曝光量分别为4.32,4.34μJ·cm-2,残余电位分别为30和45 V等光导性能数值.     

K-Dependence and temperature dependence of N2-, H2-, and He-broadening coefficients for the J = 12-11 transition of acetonitrile CH3CN located near 220.7 GHz

Extensive experiments on the K = 3 component of the J = 12-11 rotational transition of acetonitrile CH₃C¹⁴N, located near 220.7 GHz, were performed at different temperatures in the range 235-350 K. They allow determining the N₂-, H₂-, and He-broadening coefficients, as well as their temperature dependences. More specific measurements on all the K-components of the involved transition perturbed by N₂ at 303 K allow to point out a clear decreasing of the broadening coefficient with increasing K. Narrowing effects are clearly observed, and experimental lines were analysed both with Voigt and speed dependent Voigt profiles; but no exhaustive lineshape study was carried out. All the experimental parameters are compared with results derived from a semiclassical calculation of collisional interactions, including electrostatic, induction, and dispersion energy contributions.     

CuX(X=Al, Ga, In)分子的势能函数与稳定性的密度泛函研究

根据原子分子反应静力学原理导出了CuX(X=Al,Ga,In) 分子基态电子状态及其离解极限,并在B3LYP/LANL2DZ水平上计算了平衡几何、振动频率和解离能.利用Murrell-Sorbie 函数拟合出了解析势能函数,并计算出光谱参数和力常数.计算结果表明该分子体系是稳定存在的,其稳定性排序为 CuAl＞CuGa＞CuIn.     

Upconversion luminescence of Tm^3＋/Yb^3＋ codoped oxyfluoride glasses

Novel oxyfluoride glasses are developed with the composition of 30SiO2-15Al2O3-28PbF2-22CdF2-0.1TmF3 - xYbF3 - （4.9 - x） AlF3（x=0, 0.5, 1.0, 1.5, 2.0） in tool fraction, Furthermore, the upconversion luminescence characteristics under a 970nm excitation are investigated. Intense blue, red and near infrared luminescences peaked at 453nm, 476nm, 647nm and 789nm, which correspond to the transitions of Tm^3＋： ^1D2 →^3F4, ^1G4 →^3H6, ^1G4 →^3F4, and ^3H4 →^3H6, respectively, are observed. Due to the sensitization of Yb^3＋ ions, all the upconversion luminescence intensities are enhanced considerably with Yb^3＋ concentration increasing. The upconversion mechanisms are discussed based on the energy matching rule and quadratic dependence on excitation power. The results indicate that the dominant mechanism is the excited state absorption for those upconversion emissions.     

氧化铁浆液脱硫的实验研究与理论分析

本文实验研究了氧化铁浆液在酸性环境下脱除烟气中的二氧化硫气体。实验在一自制的脱硫塔中进行。通过燃烧液化石油气来产生烟气,将氧化铁的超细粉加入水中作为脱硫介质。实验中研究了二氧化硫初始浓度、水气比对脱硫效率的影响。从实验结果可以看出,脱硫率随着水气比的增加而增大;随二氧化硫的初始浓度的增加,其脱硫率呈降低趋势。在文中同时分析了氧化铁浆液的脱硫机理和此方法脱硫的优点以及目前存在的问题。     

掺杂Er^3＋的TiO2的发射光谱研究

用无水乙醇、冰醋酸、钛酸丁酯凝胶法制备了掺杂Er^3＋的TiO2粉末，测量了其在488m激发下的Stokes发射光谱和980nm激发下的上转换发光光谱。在可见光范围内，观察到了绿光和红光，绿光从500-570nm，对应Er^3＋的^2H11/2,^4S3／2→^4I15/2，红光从650～690m，对应Er^3＋的^4F9／2→^4I15／2的跃迁。由ln Ivis-In Iin曲线可知，绿光和红光均为双光子过程，光强正比于泵浦功率的二次方，即Iout ∝Iin。初步研究了此材料的上转换过程。     

具有高机械强度的掺Er~(3 )∶TeO_2-Nb_2O_5玻璃的光谱性质研究

熔制了掺铒碲铌玻璃样品(100-X)TeO2-XNb2O5(X=5,10,15,20mol%),测试了其密度、折射率、转变温度、析晶温度、维氏机械强度、吸收光谱、荧光光谱、荧光寿命等参量。利用Judd-Ofelt和McCumber理论分别计算了铒离子强度参量Ωt(t=2,4,6)和受激发射截面σemi的大小,研究了掺铒碲铌玻璃样品光谱参量对Nb2O5成分的依赖性,并与典型的碲锌钠玻璃(75TeO2-20ZnO-5Na2O)在热学、机械强度、光谱性质和放大品行四个方面进行了比较.     

Theoretical STM images of alkaline-earth metal adsorbed Si(1 1 1)3 × 2 surfaces

We have performed total-energy calculations to study theoretical scanning tunneling microscopy (STM) images of the Si(1 1 1)3 × 2 surfaces induced by the adsorption of alkaline-earth metals (AEMs). Previously, in a series of works on Ba/Si(1 1 1) system, we have found that the observed Si(1 1 1)3 × 1-Ba LEED phase indeed has a 3 × 2 periodicity with a Ba coverage of 1/6 ML and the HCC substrate structure. Based on results of the Ba case, we proposed that the HCC structure is also adopted for other AEM atoms, which was confirmed by our recent work. In this paper, we mainly report the STM simulations for different AEM systems to compare with existing experimental data. We discuss the difference in the detailed STM images for different AEM adsorbates. Especially, the difference in filled-state images between Mg and other AEM atoms is attributed to the strong Mg-Si interaction.     

Ab initio modelling of crosslinking in polymers. A case of chains with furan rings

A quantum chemical model (Abinitio HF-MO and DFT-B3LYP) of polyfurfuryl alcohol crosslinking is shown. Two pathways were considered: (a) a Diels–Alder (D–A) reaction between a dihydrofuran moiety and a furan ring; (b) the addition reaction of electrophilic specimens on conjugated double bonds. The ability for the formation of D–A adducts (dienes and dienophiles) was investigated by the frontier molecular orbital (FMO) theory. Energy gaps between the FMO's of diene and dienophile structures suggest that the occurrence of the D–A reaction is possible. The results suggest that the carbons of the exo double bonds attached to dihydrofuran rings are the sites most likely to be attacked by electrophilic species, while the C₃ and C₄ atoms display the opposite tendency due to their low HOMO electron densities. Results of a thermochemical approach to these reactions at the MP2 level was in agreement with reactivity modelled by MO predictions.