New BCN Fibres for Strong Ultraviolet and Visible Light Luminescence

Novel B3CN3 fibres with a special structure have been synthesized by a pyrolysis process. High-resolution TEM analysis shows that the as-prepared B3CN3 fibres can be described as a nanofibre-interweaved network. Strong photoluminescence at 370 nm and 700 nm from the as-prepared B3 CN3 fibres are observed at room temperature, which suggests that B3 CN3 is a promising ultraviolet- and visible-light-emitting material.     

外贴FRP加固钢筋混凝土梁用量显式设计方法

对外贴FRP（纤维增强复合材料）加固钢筋混凝土梁抗弯极限承载力的求解问题，ACI440F规范及我国CECS146：2003规程都给出了相应的求解公式，但均为验算形式．这在面向设计，即计算给定目标承载力下的FRP用量时，并不方便．针对矩形截面形式，通过引入原构件配筋特征参数和FRP配筋特征参数，推导出量纲-形式的弯矩增量与参数之间的关系表达式，并给出显式求解FRP用量的计算方法．在此基础上，进一步通过定义截面形状系数，将这一显式求解方法推广至T形及更为一般性的截面形式．     

A Powerful Simple Shooting Method for Designing Multi-Pumped Fibre Raman Amplifiers

A simple shooting method dedicated to the design of multipump discrete Raman fibre amplifiers (RFAs) ispro posed and discussed in detail. A novel scheme to provide a good initial guess for backward lightwaves is also proposed to improve the efficiency and robustness of the method. Using the proposed method, a discrete RFA with four backward pumps and 93 signal channels is simulated for the maximum number of interaction waves considered simultaneously in the RFA design reported previously; to our best knowledge. The numerical simulation results show that the proposed method is fast and robust. It can be used in the design of RFAs with various configurations including co-, counter- and bi-directJonal-pump schemes to provide an actual modelling.     

Self-Mixing Interference in Dual-Polarization Microchip Nd：YAG Lasers

The self-mixing interference in dual-polarization microchip Nd: YA G lasers is demonstrated. Under optical feedback, the orthogonal polarization components of the laser would undergo antiphase intensity modulations; at high feedback level, the polarization switching appears. We also observe that the laser self-mixing sensitivity changes periodically with the frequency difference of orthogonal polarizations. An initial theoretical model is put out and agrees well with the experiments. The results are useful for self-mixing sensitivity enhancement and offer a new way of absolute distance measurement.     

全氟磺酸树脂中空纤维膜的离子交换性能的研究

本文采用静态和动态离子交换两种方法,对全氟磺酸树脂中空纤维膜的离子交换性能进行了研究。结果表明在静态离子交换过程中,膜的交换能力随着时间增加而增加,最后趋于一平衡值;金属离子的种类对膜的交换能力有很大的影响。在动态离子交换过程中,膜的交换能力随温度升高而增加。并测定了静态和动态交换过程中的各扩散系数。     

A Fully Vectorial Effective Index Method for Accurate Dispersion Calculation of Photonic Crystal Fibres

A fully vectorial effective index method is developed for accurate dispersion calculation of photonic crystal fibres （PCFs）. In order to improve the accuracy of the model, different values for the effective core radius are used when PCFs have different fibre parameters. The accuracy of our approach is demonstrated by comparing our results with other numerical and experimental results reported in literature. It is found that the accuracy of the fully vectorial effective index method is improved and our results agree well with accurate numerical results obtained by other methods as well as the previously reported experimental data.     

光辐射在光学纤维波导中的传输

从麦克斯韦方程出发，讨论了光学纤维波导中光辐射场的解，得到光辐射在光学纤维波导中的传播特征。     

纤维的形变和断裂——Ⅰ.拉伸角蛋白纤维形变和断裂的动态研究

作者在扫描电子显微镜样品室中拉伸角蛋白纤维,观察纤维形变和断裂的过程并摄取其照片。采用低加速电压观察和适当的样品准备技术,避免了纤维在拉伸过程中出现荷电现象。该现象是非导电材料作动态观察的主要困难。从所观察到的纤维形变和断裂形态和高聚物断裂理论讨论了角蛋白纤维的形变和断裂机理。结论如下:角蛋白纤维伸长和断裂过程中出现银纹样形态,但其断裂为脆性方式;该类纤维的拉伸断裂起始于角质细胞的内、外角质层;角质与角质和角质与皮质细胞间的物质是角蛋白纤维的力学薄弱区。