关于Fejer点上的一种复有理型插值的一致逼近阶

设D是一个Jordan,Г为其边界，并设Г满足Aльпер条件。本文得到了一种基于Fejer点的有理型插值算子对于f(z)∈C（Г）的一致逼近阶。     

三种羟基羧酸气相色谱法的分离及定量分析

优化了α-羟基异丁酸、苹果酸、酒石酸的三种羟基羧酸与N，O-双(三甲基硅烷)三氟乙酰胺进行硅烷化反应的条件，建立了GC分离．外标法对各组分的分析结果表明，α-羟基异丁酸、苹果酸、酒石酸的回收率分别为98．1％、98．3％、97．3％；变异系数分别为1．5％、0．7％、1．6％．因此羟基羧酸硅烷化后，采用气相色谱法进行定量分析是完全可行的。     

螺恶嗪化合物在有机溶液中的酸致变色研究

合成了四种螺恶嗪光致变色化合物,并对它们在有机溶剂中所表现的酸致变色现象进行了研究。发现它们与盐酸在室温下形成的复合物(SP.HCl),随溶液极性的增加,其吸光强度增大,吸收光谱发生蓝移。     

Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3

We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485－1553nm signal wave and 3383－3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal.     

基于FPGA的直流稳压电源自动测试系统设计

文中提出了一种基于FPGA的直流稳压电源自动测试系统设计方案,简要介绍了系统的组成、功能特点和工作原理,重点讨论了系统的硬件实现和软件设计。     

Mid—Infrared Optical Parametric Oscillator Based on All—Solid—State—Pumped Periodically Poled LiNbO

We report the tunable mid-infrared generation with a periodically poled LinbO3(PPLN).Using an all-solid-state pumped Nd:YVO4 laser as the pump source and a PPLN nonlinear crystal with grating periods of 28.2-30.8μm,we have achieved wavelength conversion in the 2.90-4.05μm spectral range by period tuning.The use of confocal cavity design has brought a compact,all-solid-state configuration with an average output powers of idler up to -200mW.The maximum power of 277mW was obtained at the wavelength of 3.35um.     

间断磁探针阵列诊断数据的振荡模式分析

托卡马克磁探针阵列通常是围绕等离子体均匀布置的完整环形系统。由于受到布置空间的限制，HL-2A装置的磁探针只能组成带空白区域的间断阵列。在分析了HL-lM极向磁场振荡——Mirnov振荡模式的基础上，探索了HL-2A磁探针阵列诊断应注意的问题。     

HL-2A装置边缘等离子体的实验观测

HL-2A装置边缘等离子体在中平面的特性是通过可移动的探针组、快速扫描气动4探针和LHW天线边缘的固定4探针进行研究的。用于测量主等离子体边缘的温度、密度、悬浮电位、空间电位、径向和极向电场、雷诺协强、径向和极向等离子体流速及其径向分布。偏滤器靶板上的14组嵌入式静电3探针阵列用于测量同一环向截面的内外中性化板上的电子温度、密度、悬浮电位及其分布。     

Tokamak Experiment and Tokamak Engineering——Development of the Plasma Diagnostics on HL-2A Tokamak

The main mission the HL-2A tokamak is of the experiments on to explore the divertor physics and to investigate the plasma confinement, transport and instabilities with high power auxiliary heating and advanced fuelling, it is necessary to develop more new diagnostics and increase the spatial and temporal resolutions of the measurements for exist system. Up to now, about 30 diagnostic systems have been moved from HL-1M to HL-2A tokamak. Other 10 diagnostic systems are being designed and installed on the device. In developed in last 2 years, will be presented.     

The First Results of Supersonic Molecular Beam Injection in the HL-2A Tokamak

HL-2A tokamak, the first tokamak with divertor in China, has been constructed and put into operation in 2002. The main parameters are R=1.65 m, a=0.4 m, BT=2.8 T, Ip = 0. 48 MA. The divertor of HL-2A is unique, because it is characterized with a large closed divertor chamber. The device has double divertor chamber, but now it is operating with lower single null configuration to study the physics of divertor for the next step design of a divertor. Supersonic molecular beam injection （SMBI） system with LN2 cooling trap was first installed and demonstrated on the HL-2A tokamak in 2004. The first results of SMBI into HL-2A plasma are to demonstrate the function of the HL-2A divertor and to observe the cold pulse propagation during multi-pulse SMBI on HL-2A Tokamak.