D,L-1,2,2-三甲基环戊烷-1,3-二胺硝酸镍配合物的合成、结构及其和手性D-(+)-1,2,2-三甲基环戊烷-1,3-二胺氯化镍配合物的对比分析(英)

A nickel(Ⅱ) complex [Ni(La)₂](NO₃)₂ (1) with bidentate racemic 1,2,2-trimethylcyclopentane-1,3-diamine ligand has been synthesized and characterized by IR, EA, ES-MS, and its X-ray diffraction study reveals that the nickel(Ⅱ) center is tetra-coordinated by one D- and one L- diamine ligands, and a three-dimensional hydrogen-bond-sustained network is formed in the solid state by means of the eight-membered N-H…O hydrogen bond cycle. This compound also supplies a good comparison to the chiral complex [Ni(L_b)₂]Cl₂·2H₂O (2) (L_b=D-(+)-1,2,2-trimethylcyclopentane-1,3-diamine). CCDC: 218122.     

Baeyer-Villiger oxidation of ketones with hydrogen peroxide catalyzed by Sn-aniline complex

Sn-aniline complex was prepared by a simple procedure.Cyclic and acyclic ketones were oxidized into lactones or esters with very high selectivity and yield with 30% hydrogen peroxide in the presence of Sn-aniline complex.     

Ab Initio Calculation of Room Temperature Ionic Liquid 1-Ethyl-3-Methyl-Imidazolium Chlorocuprate (Ⅰ)

The Hartree-Fock method has been employed to investigate the electronic structures of EMIM (1-ethyl-3-methyl-imidazolium ), CuCl2-, Cu2Cl3-, CuCl32-, EMIM -CuCl2-, EMIM -Cu2Cl3- , and EMIM -CuCl32- pairs. Full optimization and frequency analyses of EMIM , CuCl2-, Cu2Cl3-, CuCl32-, eight initial EMIM -CuCl2-, six EMIM -Cu2Cl3-, and four EMIM -CuCl32- geometries have been carried out using Gaussian-94 soft-package at 6-31 G(d,p) basis set level for hydrogen, carbon, nitrogen, chlorine atoms and Hay-Wadt effective core potential for copper atom. The electronic structures of lowest energy of EMIM -CuCl2-, EMIM -Cu2Cl3-, EMIM -CuCl32-, single EMIM , CuCl2-, Cu2Cl3-, and CuCl32- have been comparatively studied. The calculated results showed that EMIM -CuCl2- pair conformer of lowest energy was five ring parallel to Cl—Cu—Cl with 3.2 A distance, EMIM -CuCl32- pair conformer of lowest energy was five ring parallel to CuCl32-plane with 3.4 A distance, and the optimized EMIM -Cu2Cl3- pair conformer of lowest energy was five ring perpendicular to Cl—Cu—Cl—Cu—Cl plane with 3.0 (?) distance between the terminal Cl atoms and the 5-ring of EMIM . The cohesion between cations and anions is brought about by C—H…Cl hydrogen bonds that are reinforced by charge assistance. The frequency analyses suggested that all stationary points are minimum because of no appearing of imaginary frequency. The assigned frequencies were in agreement with the experimental report. The low energy of interaction because of the bulky asymmetry of EMIM and the charge dispersion of cation and anion leads to the low melting point of the ionic liquids, EMIM -CuCl2-, EMIM -Cu2Cl3-, and EMIM -CuCl32-. The interaction energy of EMIM -CuCl2-, EMIM -Cu2Cl3-, and EMIM -CuCl32- is 309.0 kJ/mol, 316.8 kJ/mol, and 320.2 kJ/mol, respectively. The relationship of interaction energy via distance between cations and anions was also investigated by single point energy scan.     

TiO2与ZnO复合纳米结构电极的光电化学研究

利用尿素加压共沉淀法以Ti(SO4)2与Zn(NO3)2为原料制备了TiO2-ZnO复合纳米粒子, 其纳米结构电极的光电化学研究结果表明, 反应物摩尔比为3∶1, 于530 ℃煅烧制备的复合纳米结构电极的光电转换效率最高. 对吸附染料RuL2(SCN)2∶2TBA的纳米结构TiO2和各种复合纳米粒子的纳米结构电极进行光电研究的结果表明, 染料对各纳米结构电极都起到了敏化作用, 其中也是由反应物摩尔比为3∶1, 于530 ℃煅烧制备的纳米结构电极的光电转换效率最高. 对聚3-甲基噻吩修饰的纳米结构TiO2和摩尔比为3∶1, 于530 ℃煅烧的复合纳米粒子构成的纳米结构电极进行光电性能研究, 结果表明, 聚3-甲基噻吩与半导体纳米粒子之间存在p-n结, 在一定条件下p-n结的存在有利于光生电子/空穴的分离, 从而提高了光电转化效率.     

一测多评方法应用于高效液相色谱法测定防晒产品中15种防晒剂的含量

选用CAPCELL PAK C18色谱柱为分离柱,柱温为30℃,进样体积为10.0μL,并用不同比例的(A)甲醇、(B)四氢呋喃和(C)0.008 2mol·L^-1高氯酸溶液的混合液作为流动相,按程序梯度洗脱模式对市售防晒产品中所用的15种防晒剂的标准品进行色谱分离,并在波长311nm处进行紫外检测。实样分析时,称取样品0.25g,用甲醇、四氢呋喃、水和高氯酸(体积比为250∶450∶300∶0.2)的混合液(以下简称混合溶剂)15 mL超声提取30 min,用混合溶剂定容至25.0mL,离心10min,分取上清液1.0mL,加入混合溶剂定容至10.0mL,经0.45μm滤膜过滤,取滤液按仪器工作条件进行高效液相色谱分析。结果表明:所测定的15种防晒剂在一定的质量浓度范围内与其对应的峰面积呈线性关系。选定其中的二苯酮-3为参照物,并根据其余14种化合物的质量浓度和峰面积计算了各化合物的相对校正因子和相对保留时间等参数,确定了用一测多评法(QAMS)测定防晒产品中15种防晒剂的条件。还对色谱柱的型号、色谱仪器的型号以及柱温、进样量等对相对校正因子和保留时间可能产生影响的因素进行了系统试验。证明了在选定的色谱柱型号的前提下,用QAMS方法可实现防晒产品中15种防晒剂含量的同时测定。应用QAMS方法测定了6个批次防晒产品中的防晒剂含量,所得结果与用标准曲线法计算的结果基本一致,表明QAMS方法在降低检测成本和节省检测时间方面效果显著。     

超高效液相色谱-串联质谱法测定茶叶中游离氨基酸成分

建立了使用超高效液相色谱-串联质谱（UHPLC-MS/MS）高效、快速直接测定茶叶中游离氨基酸的方法。通过对质谱、色谱条件及氨基酸提取条件的优化，以含0.2%（体积分数）甲酸的5 mmol/L乙酸铵水溶液和甲醇为流动相进行梯度洗脱，在电喷雾离子（ESI）源正离子扫描模式下检测，通过UHPLC-MS/MS测定，共解析了茶叶中的20种氨基酸。结果表明，茶氨酸（Thea）、Arg、Asn和Asp在50~500 μg/L范围内线性关系良好，其他氨基酸在10~250 μg/L范围内线性关系良好，相关系数均大于0.99；加标回收率为92.3%~109.2%，相对标准偏差为2.00%~9.88%，检出限为0.001~0.011 mg/L，定量限为0.010~0.053 mg/L。该方法灵敏、准确，具有良好的重复性和稳定性，可有效检测出茶叶中的20种氨基酸及氨基类成分。     

注入Y离子对Ni3Al合金高温氧化行为的影响

以40 KeV的能量和3×1017 /cm2的剂量在Ni3Al合金中注入Y离子, 利用热重分析、 X射线衍射、扫描电镜、能谱分析和划痕分析等技术研究了离子注入对其900 ℃恒温氧化行为的影响. 结果表明 注入Y离子不仅改变了合金的氧化动力学, 而且改变了其氧化机理. 注入Y离子后合金氧化产物中的NiO含量大为增加, 从而降低了合金的抗氧化性能. 但Y离子的注入使NiO晶粒细化, 增强了氧化膜的塑性和粘附性.     

新型蒈酸基双酰肼化合物的合成及其生物活性

先将3-蒈烯分子中的碳碳双键氧化开环制得蒈酮酸，再将羰基还原成亚甲基得到蒈酸，酰氯化后与系列酰肼发生N-酰化反应合成了14个新型蒈酸基双酰肼化合物(5a～5n)，其结构经UV-Vis、¹H NMR、¹³C NMR、 FT-IR和MS(ESI)表征，并测试了目标化合物的抑菌和除草活性。结果显示：在用药量为50 μg·mL^-1时，目标化合物对花生褐斑病菌、小麦赤霉病菌、黄瓜枯萎病菌、苹果轮纹病菌、番茄早疫病菌、玉米小斑病菌、西瓜炭疽病菌以及水稻纹枯病菌等8种植物病原菌具有一定的抑制活性，其中化合物蒈酸基α-噻吩甲酰肼5f（R=α-thiophene）对苹果轮纹病菌的抑制率达85.0%，优于阳性对照百菌清。在用药量为100 μg·mL^-1时，化合物蒈酸基3′,4′-二甲氧基苯甲酰肼5j(R=3′,4′-OMe-Ph)、蒈酸基-m-甲氧基苯甲酰肼5d(R=m-OMe-Ph)、蒈酸基-m-甲基苯甲酰肼5b(R=m-Me-Ph)和蒈酸基苯甲酰肼5a(R=Ph)对油菜胚根生长的抑制率分别为88.5%、 86.1%、 85.1%和82.6%（均为A级活性水平），优于阳性对照丙炔氟草胺。     

三苄基氯化锡及其衍生物的合成

三苄基氯化锡最初用格氏法制得。Keiti等曾报道由锡和苄基氯直接制备,这时溶剂对反应的影响很大:用水作溶剂时得到三苄基锡;用甲苯作溶剂时得到二苄基二氯化锡;用正丁醇作溶剂时三苄基氯化锡的产率只有61％。在反应体系中加入KI、KBr或H_3PO_4等催化剂,三苄基氯化锡的产率也只有60％。本文用DMF作溶剂,AlCl_3-I_2作催化剂,并首次在反应体系中加入镁、锌、铝和钠等使副产物氯化亚锡还原成活性很高的金属锡,后者再与等基氯反应,可使三苄基氯化锡的产率提高到91.3％。文中还报导三种尚     

Synthesis of 1-Bromo-3-methoxy-4-propoxy-5-iodobenzene——A Novel Efficient Process for the Synthesis of Brominated Aromatic Compound

The reaction of aromatic carboxylic acid with oxalyl chloride gives rise to the corresponding acid chloride which without purification is treated with the sodium salt of mercaptopyridine oxide in the presence of 2,2-azo-bisisobutyronitrile (AIBN), radical initiator to give a brominated aromatic compound. After etherification and oxidation, 5-iodovaniline was converted to trisubstituted benzene carboxylic acid which give 1-bromo-3-methoxy-4-propoxy-5-iodobenzene by this new brominating process with a yield of 74%.