探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

EVA-g-VC的结构和动态粘弹性

本文研究了聚乙烯-醋酸乙烯酯(EVA,VAc:14％)与氯乙烯(VC)接枝共聚物(EVA-g-VC)的相结构和分子结构。接枝物EVA-g-VC由游离EVA、均聚PVC和EVA-VC接枝高分子三者组成,EVA呈连续相,PVC呈分散微粒。EVA-g-VC中EVA的含量越高,PVC粒子体积越小。实验结果表明,接枝物中“凝胶”的EVA玻璃化温度,随投料比(VC/EVA)的减小而升高;另外随VC/EVA减小,凝胶中PVC的含量和PVC的分子量也减小。这些结果说明,VC/EVA较小时得到的接枝物中,EVA上VC接枝点的数目较多,而PVC接枝链的长度较短。EVA-VC是不相容两相——EVA和PVC的“粘着剂”,其作用表现在:VC/EVA越小,接枝物中EVA和PVC的玻璃化温度越靠近。     

聚苯乙烯免疫检测球珠的表层改性及其性能

<正> 随着免疫检测在生物医学研究及临床诊断中的发展和应用,七十年代后期由高聚物制成的乳胶或球珠作为免疫载体亦得到较快的发展;八十年代以来有多种产品问世,其中聚苯乙烯球珠及检测板、盒国外已有专厂生产。 由于聚苯乙烯球珠对免疫体、酶等的固定系物理吸附,在制备及检测过程中,这些蛋     

超支化双亲水性嵌段共聚物对CaCO3结晶影响的研究

采用合成的聚乙二醇-超支化聚酯(PEG-hb-DMPA)的线性-超支化杂化二嵌段共聚物, 探讨了羧端基树状功能化的杂化嵌段共聚物对CaCO₃结晶的影响，并用FTIR、XRD、SEM等对产物进行了表征。结果表明，羧端基的双亲水性嵌段共聚物对CaCO₃结晶形貌乃至晶型均具有显著调控作用，比较高的浓度(1.67 g·L^-1, >10 min)或较低浓度作用较长时间(0.33 g·L^-1, 24 h)均得到了呈较均匀球粒形态的球霰石CaCO₃结晶。     

一步法合成N-1,3-二羟基丙烷-2-基烷基乙酰胺

以5-氨基烷基-2,2-二甲基-1,3-二噁烷为起始原料, 乙酸酐为酰化剂, 一步法选择性地合成氨基二醇类氨基乙酰化产物N-1,3-二羟基丙烷-2-基烷基乙酰胺. 该方法操作简便, 收率高. 所合成的4个新化合物的结构均经FTIR, ¹H NMR, ¹³C NMR及HRMS确证. N-3-(1,3-二羟基丙烷-2-基)丙基乙酰胺(1a)作为关键的中间体, 可以用于HIV-1 Tat/ PCAF BRD抑制剂4的合成.     

SYNERGISTIC MODIFICATION OF EPDM AND CROSSLINKING AGENT IN IMMISCIBLE BLENDS OF POLYVINYL CHLORIDE WITH LOW DENSITY POLYETHYLENE

The synergism of ethylene-propylene-diene monomer copolymer （EPDM） and dicumyl peroxide （DCP, a crosslinking agent） in low density polyethylene （LDPE）/poly（vinyl chloride） （PVC） blends was investigated. When EDPM and DCP are added to the blends simultaneously, the tensile properties could be improved significantly, especially for the blends with LDPE matrix. For example, incorporation of 10/1 （mass ratio） EPDM/DCP improves the tensile strength of the LDPE/PVC （mass ratio 80/20） blend from 7.9 MPa to 8.5 MPa and the elongation at break from 25% to 503%. Results from selective extraction, phase-contrast microscopy and thermal analysis reveal that the improvement in the tensile properties of the blends with LDPE matrix is principally due to the formation of a fine crosslinking network of the LDPE and EPDM phase. The outstanding modification effect of EPDM is explained by its dual functions： molecular entanglement with LDPE and the enhanced efficiency of DCP in the blends.     

5-氟尿嘧啶-1-乙酸合铜(Ⅱ)的合成及其与DNA的作用

The 5-fluorouracil-1-acetic acid (5FuAA) and its Cu(Ⅱ) complex (5FuAACu) were synthesized and the date for the crystal complex was obtained. The interaction of 5-fluorouracil-1-acetic acid (5FuAA) and its Cu(Ⅱ) complex (5FuAACu) with DNA was also investigated by using spectral, viscometric, electrochemical and agarose gel electrophoresis methods. The results of interaction with DNA suggest that both 5FuAA and 5FuAACu can bind to DNA in a static electricity attraction mode. But the attraction of 5FuAACu is greater than that of 5FuAA.     

一维梯状配合物{[Cu2（4,4′-bpy）3（p-Ab）2（H2O）2]·（NO3）2·4H2O}n的晶体结构

合成了一维分子梯状配合物{[Cu2(4,4′-bpy)3(p-Ab)2(H2O)2].(NO3)2.4H2O}n(4,4′-bpy=4,4′-联吡啶,p-Ab-=对氨基苯甲酸根离子),该配合物晶体属单斜晶系,P2(1)/c空间群,晶胞参数:a=1.1107(5)nm,b=1.5504(3)nm,c=1.4509(3)nm,β=104.81(3)°,V=2.4155(12)nm3,Z=2.铜离子周围有3个氧原子和3个氮原子与之配位,其中2个氧原子由对氨基苯甲酸的螯合氧原子提供,另一个氧原子由配位水提供,3个氮原子分别由三个4,4′-联吡啶提供.这六个原子在铜离子周围形成一个畸变的八面体配位环境.配体对氨基苯甲酸只有一种配位形式——双齿螯合,第二配体4,4′-联吡啶的两个氮原子均参与配位,将配合物组装成一维分子梯结构.     

分散固相萃取结合气相色谱-高分辨质谱快速筛查酱油中多种氯丙醇

建立了酱油中1，3-二氯-2-丙醇、2，3-二氯-1-丙醇、3-氯-1，2-丙二醇和2-氯-1，3-丙二醇的分散固相萃取-气相色谱-高分辨质谱快速筛查检测方法。样品采用乙酸乙酯提取，提取液浓缩后经N-丙基乙二胺净化，气相色谱-高分辨质谱测定，内标法定量。结果表明，该方法对于酱油中4种氯丙醇的定量限为0.5~10 μg/kg。在3个浓度水平下的加标回收率为78%~103%；相对标准偏差均不大于8.8%。该方法快速、简便、准确、灵敏，可作为酱油中4种氯丙醇的有效检测方法。     

Highly Efficient One-Pot Synthesis of 2-Arylmethyl N-Substituted Anilines via Yb（OTf）3 Catalyzed Three-Component Reaction

An efficient method has been developed for one-pot three-component coupling reactions of various aldehydes, 1-cyclohexen-2-one, and primary or secondary amines in the presence of a catalytic amount of Yb（OTf）3 under mild conditions to afford the corresponding 2-arylmethyl N-substituted anilines in good yields. In addition, the catalyst was easily recovered and could be reused for at least four cycles without any loss of activity.