纳米SrTiO3对高铁酸盐电化学性能影响研究

Two ferrates, K₂FeO₄ and BaFeO₄, had been prepared and characterized by XRD, IR and SEM. The electrochemical tests of the samples were carried out in the voltage range of 0.8～2.0 V and current density of 0.5～3.0 mA·cm^-2. The results indicated that performance of Zn-BaFeO₄ battery was superior to that of Zn-MnO₂ and Zn-K₂FeO₄ batteries. Nanometer SrTiO₃ prepared by Sol-gel methode with different ratio was added to the BaFeO₄ cathode in order to improve the discharge performance. The discharge capacity of the BaFeO₄ cathode was increased from 224 mAh·g^-1 to 246 mAh·g^-1 by addition of 5% nanometer SrTiO₃. The reason of enhancing BaFeO₄ electrochemical performance was discussed.     

氟掺杂锐钛矿型TiO2溶胶的制备、表征及催化性能

以四氯化钛为前驱物, 采用改性的沉淀-溶胶-水热晶化法制备了一种具有锐钛矿型结构的氟掺杂的二氧化钛(F-TiO₂)溶胶. 研究了氟掺杂、水热晶化的温度、时间及介质pH值对溶胶粒子的晶型和晶化度的影响. 采用XRD, TG-DTA, TEM, UV-Vis-DRS, FTIR, XPS技术及吸附、表面酸度测定手段对溶胶粒子的结构进行了表征. XRD分析结果表明: 氟的掺入可以降低水热晶化反应的温度或减少反应时间、提高粒子的晶化度, 溶胶粒子具有锐钛矿型结构; TEM分析显示: 粒子呈圆球型, 平均粒径大约为6.5 nm. XPS测定结果表明; 氟在溶胶粒子中以吸附态和结合态两种形式存在; 吸附、表面酸度及光催化活性测定表明: 与P25型TiO₂及纯TiO₂溶胶粒子相比, F-TiO₂溶胶粒子具有更大的吸附能力、更强的表面酸度及更高的光催化活性. 还从光生载流子分离效率等方面探讨了掺杂对催化剂活性影响的机理.     

2,2′-对苯二甲硫基二乙酸配合物的合成及表征

本文报道了配体 2 ,2′-对苯二甲硫基二乙酸和过渡金属铜 ( )、钴 ( )、镍 ( )配合物的合成。经元素分析、X射线衍射分析、红外光谱、差热 -热重分析等推算了它们的组成并指认了谱带的归属。对铜 ( )配合物进行了电子顺磁共振谱研究。     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

EVA-g-VC的结构和动态粘弹性

本文研究了聚乙烯-醋酸乙烯酯(EVA,VAc:14％)与氯乙烯(VC)接枝共聚物(EVA-g-VC)的相结构和分子结构。接枝物EVA-g-VC由游离EVA、均聚PVC和EVA-VC接枝高分子三者组成,EVA呈连续相,PVC呈分散微粒。EVA-g-VC中EVA的含量越高,PVC粒子体积越小。实验结果表明,接枝物中“凝胶”的EVA玻璃化温度,随投料比(VC/EVA)的减小而升高;另外随VC/EVA减小,凝胶中PVC的含量和PVC的分子量也减小。这些结果说明,VC/EVA较小时得到的接枝物中,EVA上VC接枝点的数目较多,而PVC接枝链的长度较短。EVA-VC是不相容两相——EVA和PVC的“粘着剂”,其作用表现在:VC/EVA越小,接枝物中EVA和PVC的玻璃化温度越靠近。     

聚苯乙烯免疫检测球珠的表层改性及其性能

<正> 随着免疫检测在生物医学研究及临床诊断中的发展和应用,七十年代后期由高聚物制成的乳胶或球珠作为免疫载体亦得到较快的发展;八十年代以来有多种产品问世,其中聚苯乙烯球珠及检测板、盒国外已有专厂生产。 由于聚苯乙烯球珠对免疫体、酶等的固定系物理吸附,在制备及检测过程中,这些蛋     

超支化双亲水性嵌段共聚物对CaCO3结晶影响的研究

采用合成的聚乙二醇-超支化聚酯(PEG-hb-DMPA)的线性-超支化杂化二嵌段共聚物, 探讨了羧端基树状功能化的杂化嵌段共聚物对CaCO₃结晶的影响，并用FTIR、XRD、SEM等对产物进行了表征。结果表明，羧端基的双亲水性嵌段共聚物对CaCO₃结晶形貌乃至晶型均具有显著调控作用，比较高的浓度(1.67 g·L^-1, >10 min)或较低浓度作用较长时间(0.33 g·L^-1, 24 h)均得到了呈较均匀球粒形态的球霰石CaCO₃结晶。     

一步法合成N-1,3-二羟基丙烷-2-基烷基乙酰胺

以5-氨基烷基-2,2-二甲基-1,3-二噁烷为起始原料, 乙酸酐为酰化剂, 一步法选择性地合成氨基二醇类氨基乙酰化产物N-1,3-二羟基丙烷-2-基烷基乙酰胺. 该方法操作简便, 收率高. 所合成的4个新化合物的结构均经FTIR, ¹H NMR, ¹³C NMR及HRMS确证. N-3-(1,3-二羟基丙烷-2-基)丙基乙酰胺(1a)作为关键的中间体, 可以用于HIV-1 Tat/ PCAF BRD抑制剂4的合成.     

SYNERGISTIC MODIFICATION OF EPDM AND CROSSLINKING AGENT IN IMMISCIBLE BLENDS OF POLYVINYL CHLORIDE WITH LOW DENSITY POLYETHYLENE

The synergism of ethylene-propylene-diene monomer copolymer （EPDM） and dicumyl peroxide （DCP, a crosslinking agent） in low density polyethylene （LDPE）/poly（vinyl chloride） （PVC） blends was investigated. When EDPM and DCP are added to the blends simultaneously, the tensile properties could be improved significantly, especially for the blends with LDPE matrix. For example, incorporation of 10/1 （mass ratio） EPDM/DCP improves the tensile strength of the LDPE/PVC （mass ratio 80/20） blend from 7.9 MPa to 8.5 MPa and the elongation at break from 25% to 503%. Results from selective extraction, phase-contrast microscopy and thermal analysis reveal that the improvement in the tensile properties of the blends with LDPE matrix is principally due to the formation of a fine crosslinking network of the LDPE and EPDM phase. The outstanding modification effect of EPDM is explained by its dual functions： molecular entanglement with LDPE and the enhanced efficiency of DCP in the blends.     

5-氟尿嘧啶-1-乙酸合铜(Ⅱ)的合成及其与DNA的作用

The 5-fluorouracil-1-acetic acid (5FuAA) and its Cu(Ⅱ) complex (5FuAACu) were synthesized and the date for the crystal complex was obtained. The interaction of 5-fluorouracil-1-acetic acid (5FuAA) and its Cu(Ⅱ) complex (5FuAACu) with DNA was also investigated by using spectral, viscometric, electrochemical and agarose gel electrophoresis methods. The results of interaction with DNA suggest that both 5FuAA and 5FuAACu can bind to DNA in a static electricity attraction mode. But the attraction of 5FuAACu is greater than that of 5FuAA.