循环流化床生物质气化炉内计算流体动力学模拟——鼓泡流化床内改进的颗粒床模型（英文）

采用改进颗粒床模型的CFD方法模拟了实验室规模冷模装置内鼓泡床的流体流动时空特性。模拟结果表明表观气速是影响气固动态特征和压力波动的主要因素之一：随表观气速的增大，气泡数目增加，气泡体积增大，压力波动增强；气速越高时均压降越大；在内循环鼓泡流化床内固体颗粒呈“单室”流型。上述与实验观察相吻合的模拟结果将有助于放大和设计商业化的内循环流化床生物质气化炉。     

铂-金交替修饰的铂核纳米颗粒的制备与表征

通过吸附在铂纳米颗粒表面的氢交替还原氯金酸和氯铂酸,得到了复合型纳米颗粒Pt@Au/Pt,用UV-Vis光谱、TEM和XRD对其进行了表征.     

单分散磁性纳米颗粒的制备及生物高分子在其上的组装

磁性纳米颗粒因其潜在的生物医学应用价值而成为纳米生物材料领域研究的前沿。本文综述了单分散磁性纳米颗粒的制备方法以及生物高分子在磁性纳米颗粒上的组装的研究进展。     

反相高效液相色谱法测定3种中成药中的葛根素

 建立了测定小儿清感灵片、步长新脑心通胶囊和感冒清热颗粒 3种中成药中葛根素含量的反相高效液相色谱方法。采用APEXODS色谱柱 ,以醋酸铵缓冲液 (10 0mmol/L ,pH 5 0 ) 甲醇 (体积比为 75∶2 5 )的混合溶液为流动相 ,检测波长为 2 5 0nm ,流速为 0 8mL/min。葛根素在 2mg/L～ 2 0mg/L时其色谱峰面积与质量浓度的线性关系良好 (r =0 9999) ;上述 3种中成药中的葛根素含量分别为 3 48mg/g ,1 0 8mg/ g及 1 5 2mg/ g(蔗糖型 ) ;其加样回收率分别为 99 0 % ,93 4%和 97 5 %。该法简便、快速、专属性强 ,可以作为多种中药制剂中葛根素含量的测定方法。     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

CRYSTALLIZATION AND MECHANICAL PROPERTIES OF POLYPROPYLENE FILLED WITH SiO2 NANOPARTICLES

Oleic acid （OA）-modified SiO2 （OA-m-SiO2） nanoparticles were prepared using surface modification method. Infrared spectroscopy （IR） was used to investigate the structure of the OA-m-SiO2 nanoparticles, and the result showed that OA attached onto the surface of SiO2 nanoparticles through esterification. Effect of OA concentration on the dispersion stability of OA-m-SiO2 in heptane was also studied, and the result indicated that OA-m-SiO2 nanoparticles were dispersed in heptane more stably than the unmodified ones. OA-m-SiO2 nanoparticles can also be dispersed in polypropylene （PP） matrix in nano-scale. The effect of OA-m-SiO2 on crystallization of PP was studied by means of DSC. It was found that the introduction of OA-m-SiO2 resulted in significant increase in the crystallization temperature, crystallization degree and crystallization rate of PP, and OA-m-SiO2 could effectively induce the formation of β-crystal PP. Effect of OA-m-SiO2 content on mechanical properties of PP/OA-m-SiO2 nanocomposites was also studied. The results show that OA-m-SiO2 can significantly improve the mechanical properties of PP.     

钇对Nd-Fe-Al-Ni非晶合金热稳定性与晶化行为的影响

采用差示扫描量热法（DSC）、X射线衍射（XRD）和透射电镜（TEM）研究了Y对Nd-Fe-Al-Ni非晶合金热稳定性和晶化行为的影响。结果表明,淬火态的Nd60Fe20Al10Ni10-xYx（x=0,2）合金基本为非晶组织同时还含有少量的淬态相,Y的加入抑制了淬态相的析出。加入Y后,非晶合金的晶化开始温度和晶化峰值温度都向高温方向移动,证明其热稳定性提高。Y的加入改变了合金的晶化方式和最终晶化产物,使非晶基体中析出的晶化相更加弥散圆整细小。并且Y具有在化学上钝化氧杂质的作用,从而抑制了氧的有害作用。利用Kissinger方程获得了Nd60Fe20Al10Ni8Y2非晶合金的晶化开始和晶化峰值激活能分别为1.21和1.16 eV。     

高温下淀粉的凝胶化作用

凝胶化作用是淀粉及改性产品生产过程中存在的一种现象。淀粉凝胶化作用的结果导致了在其产品中产生了只溶胀但不溶解的颗粒,从而影响了淀粉产品的整体性能。文章初步探讨了淀粉在高温成型过程中凝胶化作用的方式和起因。结果表明,淀粉浆料在高温成型过程中所产生的凝胶团粒是淀粉不完整的凝胶化作用的结果,足量的水分和高温是形成较多的凝胶化淀粉颗粒的原因。     

Ni－La_2O_3复合镀层的氧化行为及机制

通过对金属镍、镍镀层及Ｎｌ－Ｌａ２ｏ３复合愤层于９００℃、１０００℃时的恒温氧化实验，发现Ｎｌ－Ｌａ２Ｏ３复合镀层的氧化行为明显改善。高分辨电子显徽镜（ＨＲＥＭ）的观测研究表明，Ｎｉ－Ｌａ２Ｏ３复合铰层氧化时，纳米尺寸的ｋａ２Ｏ３颗粒掺人到氧化层中，形成了ＮｉＯ－Ｌａ２Ｏ３复合氧化物层；在氧化层晶界发现了异常原子排列的新现象。由此认为，Ｎｉ－Ｌａ２Ｏ３复合镀层抗高温氧化性能的提高，主要归因于小尺寸的纳米颗粒可微量溶解，成为Ｌａ（３＋）的晶界们聚“源”，阻止Ｎｉ（２＋）的短路向外扩散，从而改善了氧化层的微观结构和生长机制。     

基于生成对抗网络的砂岩薄片图像视野外重建

利用生成对抗网络(GAN)模型,对砂岩薄片图像的微观颗粒和孔隙结构进行视野外重建,并对预测图像的语义进行评价。结果表明,模型能够预测2.25倍于原始视野的砂岩微观结构,并且针对不同类型的岩石图像语义均具有良好的性能。模型对不同颗粒的表面纹理、颗粒形态以及多颗粒间复杂接触关系等语义的图像视野外预测结果与真实图像较为吻合。但是,在微观特殊现象图像的视野外重建任务中,模型缺乏对特殊现象的敏感性。在孔隙结构重建时,模型对微孔面孔率的预测误差大于粒间孔、裂隙和溶蚀孔等孔隙空间。不同孔隙空间重建图像的预测效果可能与孔隙特征(如孔径大小和连通性)有关。