新型金属杂冠醚配合物18-MC-6[Mn6(4-Amashz)6(DMF)6]·12DMF的合成

合成了一种新型金属杂冠醚配合物[Mn6(4-amashz)6(DMF)6]·12DMF,并用X射线衍射法对其结构进行了表征.研究了该化合物修饰金电极催化氧还原的性质,结果表明,该化合物具有平面碟状结构,对在碱性溶液中的氧有显著的催化还原作用.     

养殖池塘沉积物的重金属分布及污染特征

浙江省淅西北地区淡水养殖池塘沉积物重金属调查研究表明，养殖池塘沉积物中7种重金属元素分布不均衡，差异也较大，除Hg和Cr元素外，其余重金属元素已大大超过土壤本底值．虽然其实测含量都未超出国家规定的标准值范围，但沉积物中重金属元素对养殖水环境、养殖品种存在的潜在污染与危害值得关注．污染指数评价显示，养殖池塘沉积物中主要污染物质为Cu和Cr，而Hg、Pb污染程度相对较轻．     

短脉冲激光辐照下金属镜面波纹损伤机理研究

用脉冲Nd：YAG激光(波长1．06μm、半高宽10ns)辐照了多种金属膜层镜面，用光学与原子力显微镜观察到某些样品损伤区或周围有规律的波纹图案，波纹周期从几微米到几十微米。通过分析实验结果，这里提出了波纹产生的光学模型，认为光路系统中某些元件的衍射或者强光与元件表面相互作用过程中产生的干涉可能会导致元件表面波纹状损伤图案。通过理论计算，初步解释了实验中波纹的周期和其他现象。     

Transmission Properties of THz Radiation Pulses through Very Deep Zero-Order Metallic Gratings

Very deep zero-order metallic grating structures are processed to study the transmission properties of THz radiation pulses. The experiments have been performed with two samples. The delay of the THz pulses and the corresponding resonantly enhanced transmission spectra through the samples are observed. To explain the extraordinary transmission we have treated the samples as Fabry-Perot resonators through resonant excitation of the coupled surface plasmon polaritons filled in the cavities between the metal slats. The experimental results are in reasonable agreement with the numerical simulation. Our results show that THz-time-domain spectroscopy may be an effective technique for studying the optical properties of various THz microstructured devices.     

Deformation Morphology underneath the Vickers Indent in Bulk Metallic Glasses

Plastic deformation behaviour of Zr52.5Al10Ni10Cu15Be12.5 and Mg65Cu25Gd10 bulk metallic glasses (BMGs) is studied by using the depth-sensing nanoindentation and microindentation. The subsurface plastic deformation zone of the BMGs is investigated using the bonded interface technique. Both the BMGs exhibit the serrated flow depending on the loading rate in the loading process of indentation. Slow indentation rates promote more conspicuous serrations, and rapid indentations suppress the serrated flow. Mg-based BMG shows a much higher critical loading rate for the disappearance of the serration than that in Zr-based BMG. The significant difference in the shear band pattern in the subsurface plastic deformation zone is responsible for the different deformation behaviour between the two BMGs. Increase of the loading rate can lead to the increase of the density of shear bands. However, there is no distinct change in the character of shear bands at the loading rate of as high as1000 nm/s.     

Unusual Transport Properties near the Insulator-Metal Transition in Colossal Magnetoresistive Manganites

It is argued that a combination of the Griffiths theory and the double-exchange mechanism predicts the random distribution of ferromagnetic metallic clusters above the Curie temperature TC in colossal magnetoresistive manganites. Along this line, we propose a model for the temperature dependence of resistivity that yields a quantitative agreement with experimental data obtained in a typical manganite La2/3Ca1/3MnO3. Our result indicates that the formation and growth of ferromagnetic metallic clusters are responsible for the observation of unusual transport properties near the insulator-metal transition.     

液态金属压铸机的实时压射控制系统

为了满足压铸工艺的要求，有必要进行压射机构的改造并对压射实施自动控制．为此，研究了液态金属压铸机压射结构的重新设计及其实时控制，设计了一套对压射进行实时控制的系统，着重研究了该系统的组成、基本原理及其特点．     

金属氢研究新进展

简要介绍了金属氢的研究意义和应用前景 ,详细评述了有关的高压实验方法和最近的研究成果及进展 ,特别是固体氢的相图、结构和相变 .近十多年来 ,随着超高压技术的发展 ,已能在金刚石对顶砧 (DAC)上产生30 0GPa的静态压力 ,并可进行高压原位实验研究 .对固体氢进行了高压拉曼、同步辐射X射线、光反射和吸收、同步辐射红外光谱等一系列高压物性和相变研究 .从而确定了固体氢的三个相 ,并提出了可能的相结构 .     

大束流Co离子注入形成CoSi2/Si Schottky结的特性

采用Schottky结源漏结构是克服传统MOSFET器件短沟效应的一种有效方法.不同于常规的固相反应形成硅化物的方法,该文利用金属蒸汽真空弧(MEVVA)离子源进行强流金属离子注入合成了金属硅化物CoSi2, 并首次对其与Si所形成的Schottky结特性进行了研究.结果表明850 ℃退火1 min后已形成CoSi2硅化物晶相,且结深易于控制.电流特性表明p型衬底得到了较好的Schottky结,势垒高度为0.48 eV, 理想因子为1.09, 而n型衬底形成的Schottky结的理想因子偏大,需进一步改进工艺.