2种煤液化残渣氧化萃余物中杂原子化合物的鉴定

在40℃恒温水浴下用次氯酸钠对2种煤液化残渣进行氧化,将反应所得混合物用滤膜过滤,滤出液依次用石油醚、二硫化碳、四氯化碳和乙酸乙酯萃取,得到的萃取物用气相色谱/质谱(GC/MS)分析.根据分析结果系统地考察了2种煤液化残渣中所含杂原子化合物的分布,为从煤液化残渣中选择性地脱除这些杂原子化合物及提取高附加值化学品提供了一条路径.     

Crystallization of Poly(ethylene adipate) within γ-Phase Poly(vinylidene fluoride) Matrix

The effects of PEA on the γ-phase PVDF crystal structure and the crystallization of PEA within the pre-existing γ-phase PVDF spherulites have been investigated by optical microscopy(OM), infrared spectroscopy(IR) and scanning electron microscopy(SEM). The results demonstrate that the γ-phase PVDF spherulites consist of the lamellae exhibiting a highly curved scroll-like morphology and develop preferentially in PEA-rich blend. With increasing PEA concentration, the scroll diameter increases and the scrolls are better separated from each other. PEA crystallizes first in the interspherulitic region and transcrystalline layer develops. Subsequently, the transcrystalline layer of PEA continues to grow within the γ-phase PVDF spherulites, e.g., in the region between the scrolls, until impinging on other PEA transcrystalline layers or spherulites. The crystallization kinetics results indicate that the growth rate of PEA crystals in the intraspherulitic region of γ-phase PVDF shows a positive correlation with content of PEA, but a negative one with the crystallization temperature of γ-phase PVDF.     

仿生非光滑花纹沟对轮胎抗滑水性能的影响

以205/55R16乘用车轮胎为研究对象,采用计算流体动力学建立了考虑胎面花纹变形的轮胎滑水分析模型;以气-液二相流数值模型分析了轮胎的滑水性能,并将临界滑水速度仿真值与NASA滑水速度预测值及轮胎发生滑水时力平衡下的速度进行对比.在此基础上,引入仿生减阻理念,研究了夹角为60°、高度为0.6mm的仿生对称V形结构对花纹沟排水量和水流阻力的影响,并将其结构特征信息等效移植到接地区轮胎花纹沟底,进行了仿生花纹轮胎的滑水性能分析.结果表明:所建滑水分析模型可用来分析轮胎滑水时的流体运动特性;相对原花纹轮胎,仿生非光滑花纹沟轮胎通过提高接地区花纹沟内水流速度,降低了胎面动水压力,提高了临界滑水速度.     

(2+1)维KD方程组的一类非亚纯行波解

通过行波变换将(2+1)维KD方程组转变为复域中的常微分方程,给出复合的(2+1)维KD方程组2(wk-3l2+3ak2 C1)u=2k4 u″-k2 a2 u3+(6k2b-3kal)u2+C2,v=lku+C1的一类非亚纯解的结构.     

Mass and isotopic concentrations of water-insoluble refractory carbon in total suspended particulates at Mt.Waliguan Observatory(China)

Mass concentration and isotopic values δ¹³C and ¹⁴C are presented for the water-insoluble refractory carbon（WIRC） component of total suspended particulates（TSP）,collected weekly during 2003,as well as from October 2005 to May 2006 at the WMO-GAW Mt.Waliguan（WLG） site.The overall average WIRC mass concentration was（1183±120）ng/m³（n = 79）,while seasonal averages were 2081 ±1707（spring）,454±205（summer）,650±411（autumn）,and 1019±703（winter） ng/m3.Seasonal variations in WIRC mass concentrations were consistent with black carbon measurements from an aethalometer,although WIRC concentrations were typically higher,especially in winter and spring.The δ¹³C PDB value（-25.3 ± 0.8）%.determined for WIRC suggests that its sources are C₃ biomass or fossil fuel combustion.No seasonal change in δ¹³C PDB was evident.The average percent Modern Carbon（pMC） for ¹⁴C in WIRC for winter and spring was（67.2 ± 7.7）%（n = 29）.Lower pMC values were associated with air masses transported from the area east of WLG,while higher pMC values were associated with air masses from the Tibetan Plateau,southwest of WLG.Elevated pMC values with abnormally high mass concentrations of TSP and WIRC were measured during a dust storm event.     

考虑非结构性的多级生产流程调度方法

针对智能化柔性制造过程存在的再制造过程,对中小型设备生产车间及其仓储转运的模型构建、分析方法、以及参量相关性提出了新的解决思路.为了最大限度的减少建设周期、合理化投资成本、以及优化生产流程,建立了考虑非结构性的多级生产流程的数学模型,以完成度、完工时间和调度频次为目标函数分析生产要素间的相关性.实验结果表明,融合再加工过程的智能化柔性制造单元中,生产要素为非线性相关,个别要素具备对称性,为实际工况中的生产改进及优化提供了一定理论基础.     

关于二面体群的共轭类长素图

讨论二面体群的结构问题,利用GAP软件给出二面体群D2n的共轭类长素图,并完整给出当n以及n/2分别是奇数和偶数时的共轭类长素图情况.     

受交界面控制的类均质体滑坡治理

在我国西南部地区,由于特殊的地形地质条件,滑坡灾害尤为严重,造成巨大的生命财产和经济损失。以云南省大戛高速某滑坡为例,通过调查分析滑坡地质条件及其规模,采用圆弧滑动法计算边坡的安全系数,提出类均质滑坡上部圆弧滑动下部沿基伏界面滑动的机制,以及针对性的工程处置措施,为类似工程问题提供借鉴。     

Cu2O/TiO2-Bi2WO6三元复合催化剂的制备及光催化性能研究

采用水热法制备花状Bi2 WO6,并利用超声分散法制备了Cu2 O/TiO2-Bi2 WO6复合光催化剂,通过FESEM、XRD、XPS、FI-IR、UV-vis DRS和PL对光催化剂进行了分析和表征.表征结果证明:花状Bi2 WO6表面负载着碎片状的TiO2和立方体Cu2 O形成Cu2 O/TiO2-Bi2 WO6复合光催化剂;以短链脂肪酸(SCFAs)为牺牲剂,考察复合光催化剂的光催化产生氢气和烷烃的性能.实验结果表明:Cu2 O/TiO2-Bi2 WO6复合光催化剂以乙酸为牺牲剂,主要产氢气和甲烷,降解率高达91.82;;以丙酸为牺牲剂,产物主要是乙烷和丁烷,降解率高达90.70;;以丁酸为牺牲剂,除了氢气,甲烷,乙烷,丙烷,丁烷外,气体产物还含有一定量的戊烷,其降解率高达91.50;.结合反应液中间产物的成分进行检测,由此推断出光催化反应的可能机理.     

苯丙氨酸解氨酶印迹交联酶聚体的制备及部分催化性能研究

苯丙氨酸解氨酶(PAL)是酶法生产L-苯丙氨酸的关键酶,目前主要利用红酵母PAL进行转化,但红酵母PAL稳定性较差,妨碍了其工业化的应用。该研究将交联酶聚体和印迹酶的制备方法相结合,制备出新型固定化酶-苯丙氨酸解氨酶印迹交联酶聚体,筛选出最优的底物印迹分子,并考察了该固定化酶的部分特性。结果表明,反式肉桂酸是制备印迹PAL交联酶聚体的最适底物,所制备印迹交联酶聚体的最适催化温度和pH值分别是50℃和10.5,并表现出较好的重复使用性,连续催化9个批次后,仍保持了32%的酶活保留率。