Relativistic Electromagnetic Solitary Wave in a Cylindrical Magnetized Plasma

In the presence of an applied static and uniform magnetic field, a cylindrical Kadomtsev-Petviashivili equation is derived for a relativistic electromagnetic solitary wave propagating in collisionless plasma consisting electrons, positrons, and ions in the case of weak relativistic limit. This equation is solved in a stationary frame to obtain explicit expression for the velocity, amplitude and width of solitons. The amplitude of the solitary wave has a maximum value at a critical αc of the ratio of the ion equilibrium density to the electron one, and it increases as the applied magnetic field becomes larger.     

Inner Surface Modification of a Tube by Magnetic Glow-Arc Plasma Source Ion Implantation

A new method named the magnetic glow-arc plasma source ion implantation （MGA-PSⅡ） is proposed for inner surface modification of tubes. In MGA-PSⅡ, under the control of an axial magnetic field, which is generated by an electric coil around the tube sample, glow arc plasma moves spirally into the tube from its two ends. A negative voltage applied on the tube realized its inner surface implantation. Titanium nitride （TIN） films are prepared on the inner surface of a stainless steel tube in diameter 90mm and length 600mm. Hardness tests show that the hardness at the tube centre is up to 20 GPa. XRD, XPS and AES analyses demonstrate that good quality of TiN films can be achieved.     

Investigation of Impurity Ion Transport with Laser Blow-off in HL-2A Tokamak

Non-recycling impurities are injected into ohmic HL-2A plasma for the first time. The impurities of titanium and aluminium are injected in the discharges with varying plasma density and current. The convection and diffusion process of the injected impurity ions during the inward phase are qualitatively investigated. The results show that the transport of impurities is much slower in the central region of the plasma than outside of it and that it is greatly enhanced during sawtooth crashes.     

等离子辅助镀膜技术

传统的电子束蒸发工艺提供了高速率的沉积，但由于成膜分子的能量较低，使沉积的薄膜排列密度很低，其性能和块材料区别很大，已有不少学者发现了很多金属和氧化物薄膜具有典型的柱状结构，薄膜的低排列密度造成了其光学常数和机械性能不如块状材料，近几年发展起来的高功率等离子体辅助镀膜技术解决了上述问题，本文报道了我国自己研制的等离子体源（GIS）的性能指标，用这个源所做的单层TiO2膜的成膜工艺与质量，以及用等离子辅助沉积的减反射膜的工艺。     

飞秒激光剥蚀-多接收电感耦合等离子质谱原位微区分析青铜中铅同位素组成-以古铜钱币为例

建立了飞秒激光剥蚀-多接收电感耦合等离子质谱(fLA-MC-ICPMS)铅同位素原位微区分析方法,分别利用溶液法(SN-MC-ICPMS)和激光剥蚀法(fLA-MC-ICPMS)对15个铜(黄铜,青铜)国家标准物质进行了实验分析,测试的结果表明CuPb12(GBW02137)中Pb同位素组成非常均一,可作为以铜为基体的青铜、黄铜及铜矿中Pb同位素原位微区分析的外部参考物质。对CuPb12进行了112次fLA-MC-ICPMS Pb同位素分析测试,其加权平均值与溶液法测定的Pb同位素比值在2σ误差范围内完全一致,208 Pb/204 Pb和207Pb/206Pb比值的内部精度RSE分别小于90和40ppm,外部精度RSD分别小于60和30ppm。利用本实验室建立的fLA-MC-ICPMS分析方法对13个古铜钱币中Pb同位素进行了原位微区无损伤分析,测试结果表明,不同朝代古钱币中Pb同位素组成差异较大,即使同一朝代的古钱币其Pb同位素组成也不尽相同。     

Three different low-temperature plasma-based methods for hydrophilicity improvement of polyethylene films at atmospheric pressure

Three different low-temperature plasma-based methods were used to improve the surface hydrophilicity of polyethy- lene （PE） films, and all the modification processes were carried out by employing an atmospheric pressure plasma jet （APPJ） system. （a） PE films were directly modified by APPJ using a gas mixture of He and 02. （b） Acrylic acid （AA） was introduced into the system and a polymer acrylic acid （PAA） coating was deposited onto the PE films. （c） AA was grafted onto the PE surface activated by plasma pre-treatment. It was found that the hydrophilicity of the PE films was significantly improved for all the three methods. However, the samples modified by Process （a） showed hydrophobicity recovery after a storage time of 20 days while no significant change was found in samples modified by Process （b） and Process （c）. The Fourier transform infrared spectroscopy （FTIR） results indicated that the most intensive C=O peak was detected on the PE surface modified by Process （c）. According to the X-ray photoelectron spectroscopy （XPS） analysis, the ratios of oxygen-containing polar groups for samples modified by Process （b） and Process （c） were higher than that modified by Process （a）.     

氩、氢混合等离子体处理对GaAs表面性质及发光特性的影响

介绍了一种氩、氢混合等离子体清洗GaAs基片的实验工艺,深入研究了氩、氢等离子体清洗GaAs表面污染物和氧化层,并活化表面性能的基本原理,同时讨论了气体流量、溅射功率和清洗时间等不同溅射参数对等离子体清洗效果的影响。结果表明,在氩气和氢气流量分别为10 cm³/min和30 cm³/min,溅射功率为20 W,清洗时间为15 min的条件下,GaAs样品的光致发光强度提高达139.12%,样品表面的As-O键和Ga-O键基本消失。     

可见光波在天然金属基界面正负折射机理的研究和进展

Snell定律揭示了光在穿越不同介质界面时的传播和折射规律,这是现代物理光学的重要基础。追求完美光学透镜的途径之一是寻找正负折射率匹配材料,但在相当长时期内,在自然界中从未发现有违背Snell定律的天然负折射率材料存在。在本研究工作中制备了一系列入射角精确可控的楔形贵金属金和银等样品,采用不同波长的激光,对于光在最简单的天然贵金属界面传播时所发生的由负到正折射特性变化进行了定量实验测量,获得表观折射率随入射和折射角变化的定量关系。对于导致奇异光折射现象的各种争议性机理进行了细致探索和讨论,这与等离子体、负磁导率和Goos-Hanchen等效应无关。研究结果将有助于人们理解光在金属基微结构中发生正负折射传播的物理机理,从而为新型微纳光电子材料和器件的研制和应用建立基础。     

基于光子晶体光纤交叉敏感分离的磁场温度传感研究

提出了一种基于定向耦合效应和表面等离子共振效应的交叉敏感分离的磁场温度传感结构.在光子晶体光纤的一个特定空气孔中填充磁流体,利用磁流体的磁光效应和定向耦合效应形成磁场传感通道;在垂直方向的另一空气孔的内壁镀金纳米薄膜并填充甲苯液体,利用甲苯的温敏效应和表面等离子共振效应形成温度传感通道.对应输出谱出现两个损耗峰,测量损耗峰位置可以间接测出磁场强度和温度变化.通过理论计算()和结构优化,在90—270 Oe1 Oe=10~3/(4π) A/m范围内,磁场强度的灵敏度最高可达1.16 nm/Oe;在25—60?C范围内,温度的灵敏度可达-9.07 nm/?C.虽然填充的两种液体的折射率都受环境温度的影响,但通过建立灵敏度系数矩阵,可以消除磁场强度与温度的交叉敏感,实现磁场温度双参量的高灵敏度检测.