冷却速率对Lennard-Jones体系凝固过程中结构与动力学性质的影响

用分子动力学模拟方法研究了五种不同冷却速率对Lennard-Jones体系凝固过程中结构与动力学性质的影响。采用两种不同的方法来确定玻璃转变温度Tg,并且对结晶温度Tc、径向分布函数g(r)、均方位移函数MSD与扩散系数D、平均配位数进行比较分析。结果表明：冷却速率影响Lennard-Jones体系凝固过程中的结构。当使用足够高的冷却速率冷却时,体系发生玻璃化转变,而且冷却速率越快,玻璃转变温度越高;当冷却速率较小时,体系形成晶体,而且冷却速率越慢,结晶温度越高,结晶程度也越高。同时发现,冷却速率对扩散系数和平均配位数也有很大影响,二者在体系发生玻璃转变时都有一个缓变的过程,表明了过冷液相区的存在。     

毛细管电泳-电化学发光法测定石蒜鳞茎中的石蒜碱

建立了毛细管电泳-电化学发光(CE-ECL)检测石蒜碱的方法。探讨了检测电位、分离缓冲液pH和浓度、分离电压、进样电压及进样时间等因素对石蒜碱分离检测的影响。在最佳实验条件下,石蒜碱含量在0.03~2μg/mL范围内与其峰面积呈良好的线性关系,相关系数为0.9995,检出限为0.005μg/mL(S/N=3)。对0.8μg/mL石蒜碱进行7次平行实验,其迁移时间、峰高和峰面积的RSD分别为1.7%,5.2%和5.6%。方法应用于石蒜鳞茎中石蒜碱的测定,加标回收率为92.2%~98.6%。     

基于膦酸基的高温质子交换膜的研究进展

提高质子交换膜燃料电池(PEMFCs)的工作温度,不但可以提高电催化剂的活性以及电催化剂对原料气中CO等杂质气体的耐受能力,少用甚至不用Pt 等贵金属作电催化剂,还可以简化PEMFCs的水热管理系统,提高PEMFCs的综合能量转化效率. 实现高温PEMFCs的核心是开发能够适用于高温PEMFCs的高温质子交换膜(HT-PEM),是PEMFCs的研究热点. 在众多HT-PEM候选材料中,基于膦酸基的质子交换膜材料是最具前途的候选材料之一,是制备HT-PEM的主要研究方向. 本文综述了基于膦酸基的HT-PEM的研究进展,讨论了膦酸基参与的质子传导机理,比较了纯聚合物膦酸膜、膦酸基接枝改性膜、酸-碱两性膜、掺杂型复合膜的电导率、物理化学稳定性、机械性能等. 最后,展望了基于膦酸基的HT-PEM的发展趋势.     

蛋白质对测定水产品中氯苯类化合物的影响及消除

提出了气相色谱-质谱法测定水产品中1,3-二氯苯,1,2-二氯苯,1,2,4-三氯苯等3种氯苯类化合物含量的方法。采用荧光猝灭法研究了氯苯类化合物与蛋白质之间的结合作用,结果表明氯苯类化合物与鱼血清白蛋白之间存在较强的结合作用。水产品样品以丙酮-磷酸氢二钾-水双水相体系进行前处理。在气相色谱分离中用DB-WAX毛细管色谱柱为固定相,在质谱分析中采用选择离子监测模式。3种氯苯类化合物的质量浓度均在0.5~5.0mg·L-1范围内与其峰面积呈线性关系。以空白样品为基体进行加标回收试验,所得回收率在77.0%~116%之间,相对标准偏差(n=6)在2.6%~7.1%之间。     

基于β-二亚胺配体的铝氧硼六元环化合物和其中间体的合成、表征及其反应性研究

LAl H2(L=(Z)-4-[(2,6-二异丙基苯基)氨基]戊-3-烯-2-亚基-2,6-二异丙基苯胺)分别与2-噻吩苯硼酸和2-苯并噻吩硼酸反应,合成含铝氧硼六元环的化合物LAl[OB(2-thiophen)]2(μ-O)(2)和LAl[OB(2-benzo[b]thiophen)]2(μ-O)(3)。LAl H2与2,6-二甲基苯硼酸反应生成了LAl[OB(2,6-CH3C6H4)OH]2(4)。化合物4是化合物2和3的中间体。所有化合物都进行了IR、1H NMR和元素分析等表征。并通过X射线单晶衍射测定了化合物2和4的单晶结构。     

The effects of ultrasound frequency and power on the activation energy in Si-KOH reaction system

The activation energy is the minimum amount of energy required to initiate a reaction. It is one of the important indexes for appraising a reaction. The chemical reaction rate is closely related to the value of activation energy, and reducing activation energy is propitious to promoting a chemical reaction. In the present paper, the relationship between the activation energy in Si-KOH reaction system and the ultrasound frequency and power has been discussed for the first time. The range of ultrasound frequency and power is 40-100kHz （interval by 20kHz） and 10-50W （interval by 10W）, respectively. The experimental clata indicate that the activation energy decreases with the increasing ultrasound power. Comparing with the activation energy without ultrasound irradiation, the results in our paper indicate that ultrasound irradiation could reduce the activation energy in Si-KOH reaction system and increase the reaction rate.     

橡胶纳米复合材料的一些新进展

近十年来出现了许多新型的橡胶纳米复合材料体系,这些体系展现出比传统体系更强的可设计性、更丰富的性能表现或者呈现功能性质。本文主要综述了橡胶基纳米复合材料的新体系设计和制备方法。基于目前研究现状,作者展望了橡胶纳米复合材料研究若干个值得关注的方向。     

共无定形药物——新型单相无定形二元体系

共无定形药物是活性药物成分与其他小分子固体物质(药物或辅料)结合形成的具有单一玻璃化转变温度的单相无定形二元体系。它作为一种新的药物固体形态,可能改善药物的溶解度、溶出速率、稳定性及生物利用度等理化性质,已成为药物研发的一种新途径。本文主要对共无定形药物的定义、形成机理、制备方法、分析鉴别方法、物理化学稳定性以及溶解度和溶出速率进行综述,并对共无定形与固体分散体和共晶的比较进行了概述。     

Syntheses,Crystal Structures and Antibacterial Activities of Two Heterocyclic Schiff Base Compounds

Two heterocyclic Schiff bases were synthesized via the condensation reactions of primary amines with carbonyl compounds. 2-[(4-pyridylmethylene)-amino] phenol(compound 1) was synthesized by the interaction of 4-pyridinecarboxaldehyde with o-aminophenol in ethanol solvent; N,N‘-bis(3-(furan-2-yl)allylidene)benzene-1,4-diamin(compound 2) was synthesized by the interaction of 3-(2-furyl)acrolein with p-phenylenediamine in ethanol medium. The compounds were characterized by elemental analysis, IR, MS and single-crystal X-ray diffraction. Compound 1(C12H10N2O) crystallizes in the monoclinic system, space group P21/c with a = 7.0771(7), b = 7.2820(7), c = 19.849(2),β= 96.3390(10)°, V = 1016.66(17) ?3, Z = 4, Mr = 198.22, Dc = 1.295 g/cm3, F(000) = 416, GOOF = 1.060, μ= 0.085 mm-1, the final R = 0.0371 and wR = 0.0929 for 1497 observed reflections with I 2σ(I). Compound 2(C20H16N2O2) crystallizes in the orthorhombic system, space group Fdd2 with a = 26.344(15), b = 48.50(3), c = 5.293(3), V = 6764(7) ?3, Z = 16, Mr = 316.35, Dc = 1.243 g/cm3, F(000) = 2656, GOOF = 1.043, = 0.081 mm-1, the final R = 0.0526 and wR = 0.1267 for 2059 observed reflections with I 2σ(I). 1 and 2 molecules are connected through hydrogen bonds to generate a 2D network and a 1D chain structure, respectively. The preliminary antibacterial activity results showed that the title compounds display excellent antibacterial activities to Escherichia coli, Staphylococcus aureus and Bacillus subtilis.     

Efficient side-chain modification of dextran via base-catalyzed epoxide ring-opening and thiol-ene click chemistry in aqueous media

In this study, a novel approach by combining base-catalyzed epoxide ring-opening and thiol-ene click chemistry is presented for the side-chain modification of dextran. The vinyl-modified dextran is prepared by a basic epoxide ring opening reaction of allyl glycidyl ether in 0.1 mol/L NaOH, followed by thiol-addition click reaction of three model sulfhydryl compounds using water-soluble Irgacure 2959 as the photoinitiator, leading to side-chain functionalized dextran modified with carboxyl, bidentate dicarboxyl or amino groups. This is the first example of combining epoxide ring-opening and thiol- ene click chemistry for side-chain modification of dextran in aqueous media. Importantly, it may also be extended as a convenient and efficient method for the side-chain modification of other polysaccharides.