无溶剂催化氧化法制备苯甲酸

在本科生有机化学实验“苯甲酸的制备”中引入环境友好化学反应 ,以苯甲醇和氢氧化钠为原料 ,用无溶剂氯化铜催化氧化法制备苯甲酸 ,无有害废物排放。产品收率达 80 %。     

色谱法研究杂多酸 4: 杂多酸在反相离子对色谱中的保留行为

本文研究了Keggin型杂多酸盐在四丁基铵-磷酸盐缓冲液-甲醇体系中的色谱保留行为。导出了反相离子对色谱中离子对试剂浓度, 强溶剂浓度及离子强度影响溶质保留值的三个规律式, 并用实验及文献值进行验证, 在所研究的体系中, 不同电荷数的杂多酸阴离子都可有保留, 通过调节适当的离子对试剂浓度及强溶剂浓度,可改善其选择性。     

CuO/ZnO/Al2O3合成甲醇催化剂制备方法

ＣｕＯ／ＺｎＯ／Ａｌ２Ｏ３合成甲醇催化剂的制备方法吴晓晖刘金尧刘崇微朱起明（清华大学化学系一碳化工国家重点实验室，北京１０００８４）何菲（天津大学化工系一碳化工国家重点实验室，天津３０００７２）关键词氧化铜，氧化锌，氧化铝，超细粒子，草酸盐胶体...     

内-α-取代-α-甲基双环[2,2,1]庚烷-2-基甲醇的合成及其结构与香气的关系

合成了18种内-α-取代-α-甲基双环[2,2,1]庚烷-2-基甲醇(Ⅰ)。测定了所有化合物的折光率(或熔点)、质谱、红外光谱、~1H核磁共振谱、气相色谱的保留时间和薄层色谱的比移值。评定了它们的香气,并与相应的内-α-取代-α-甲基双环[2,2,1]-5-庚烯-2-基甲醇(Ⅱ)系列化合物的香气进行了比较,初步探讨了结构与香气的关系。     

可逆与不可逆吸附氢在合成甲醇反应中的作用

在自行设计和建立的加压动态分析装置上研究了合成甲醇催化剂上氢的吸附和反应行为。结果表明:在反应条件下催化剂上吸附的氢可分为可逆吸附氢和不可逆吸附氢;不可逆吸附氢又可分为能被CO顶替出来的和不能被CO顶替出来的两部分;能被CO顶替出来的不可逆吸附氢对CO的吸附起促进作用,不能被CO顶替出来的不可逆吸附氢是合成甲醇催化剂必不可少的“组分”或称“促进剂”;同时甲醇的生成是可逆吸附氢与一氧化碳作用的结果。     

在涂层TiO2改性铜催化剂上甲醇脱氢制甲酸甲酯

在常压和２５０℃下，考察了涂层ＴｉＯ２改性铜催化剂上甲醇脱氢生成甲酸甲酯的活性和选择性以及催化剂的稳定性。结果表明，涂层ＴｉＯ２明显提高了铜催化剂的活性和稳定性。在所考察的铜催化剂中，以Ｃｕ／ＴｉＯ２／ＡｌＯ３的催化活性最高，甚至高于离子交换法制备的Ｃｕ（ｅｘ）／ＳｉＯ２催化剂。ＸＰＳ分析表明，Ｃｕ／ＴｉＯ２／ＡｌＯ３中存在着两种化学环境不同的ＣＵ（０），即负载在ｒ－ＡＬＯ３和ＴｉＯ２－Ａｌ２Ｏ３     

由XPS研究CO2在低压甲醇合成中的作用

本文应用XPS,在模拟工业催化剂和实际操作条件下,对低压甲醇合成铜基催化剂的表面形态进行了研究.结果表明,在还原及反应状态下,催化剂表面没有稳定的Cu~(2+)、Cu~+离子存在,仅Cu~0能被检测到;ZnO被还原,形成缺氧结构ZnOx(X≤1),表面出现氧空位.认为高度分散的Cu~0与其紧密接触的部分还原的ZnOx联合组成了甲醇合成的表面活性中心,也即表面上的Cu-Zn-O(“口”为氧空位)构成了最佳合成活性单元.提出反应原料气中适量CO_2的加入有助于金属Cu微晶的分散,认为CO_2的作用主要是使反应气氛中含有一定的氧化势,它与原料气中的CO+H_2一起,对金属Cu微晶起氧化还原作用.CO_2可将Cu~0氧化成Cu~(?+)(甚至Cu~+).但Cu~(?+)会马上被CO+H_2还原成Cu~0.通过这样的氧化还原循环,阻止了Cu微晶的聚集长大,延长了催化剂的使用寿命.     

Selective Oxidation of Methane to Methanol Using Molecular Oxygen on MoOx／（LaCoO3＋Co3O4） Catalysts

Comparatively high CH3OH selectivity (60.0%) and yield (6.7%) were obtained on MoOx/(LaCoO3 Co3O4) catalysts in selective oxidation of methane to methanol using molecular oxygen as oxidant. The interaction between MoOx and La-Co-oxide modified the molecular structure of molybdenum oxide and the ratio of O^-/O^2- on the catalyst surface, which controlled the catalytic performance of MoOx/(LaCoO3 Co3O4) catalysts.     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

极性非质子溶剂与甲醇或1,2-二氯乙烷的汽液平衡

使用双沸点仪测定了丙酮、乙酸乙酯、对二氧六环、乙腈或三乙胺与甲醇或1,2→二氯乙烷以及二者混合物等十一组二元体系在99.3 kPa下的汽液平衡数据(T,x,p), 计算了有关体系的过量吉布斯自由能。结果表明, 六种非质子溶剂与甲醇组成的二元系GE>0; 乙腈或三乙胺与1,2-二氯乙烷组成的二元系GE>0, 而丙酮、乙酸乙酯或对二氧六环与1,2-二氯乙烷的二元混合物GE<0。从同种分子间或不同种分子间的缔合作用对上述结果进行了讨论。本文还在固定极性非质子溶剂(第三组分)物质的量浓度的条件下, 测定了非质子溶剂+1,2-二氯乙烷+甲醇三元混合物的汽液平衡数据, 考察了非质子溶剂的加入对甲醇+1,2-二氯乙烷二元系GE的影响。