第十届世界生物传感器大会Biosensors2008暨纳米生物传感器国际专题研讨会

第十届世界生物传感器大会Biosensors2008暨纳米生物传感器国际专题研讨会将于2008年5月13~16日在上海召开。摘要截止日期:2007年10月30日。世界生物传感器大会(The World Congress on Biosensors)是规模和影响最大,内容最广泛的生物传感器学术会议,每两年举办一次。第十届世界     

纳米磁性液体对多元多相体系结晶特性的影响

以HCFC141b气体水合物结晶生成体系为对象,通过实验研究了磁场作用下纳米磁性液体对多元多相体系结晶生成特性的影响.重点研究了互不相容的水相与HCFC141b液相间、水相与气相(水蒸汽与HCFC141b蒸气)间的质量传递现象.结果发现,在旋转磁场作用下,纳米磁性液体能显著增强相间的质量传递和热量传递,使得结晶生成性能包括生成温度、生成速率等得到很大的提高.     

聚苯胺纳米点阵列的制备和库仑台阶现象

本文制备了PANI纳米点阵列, 利用导电原子力显微镜(C-AFM)表征了其形貌和导电性能, 在室温下观察到PANI纳米点的库仑台阶(Coulomb staircase)现象, 并利用库仑阻塞效应的理论进行了初步的分析.     

利用DPN技术直接构建磁性纳米图形

在纳米尺度下构建有序的磁性模板和图形是当前的研究热点之一 [1,2 ] .这种模板在生物样品的分离[1] 、磁电子学研究和信息存储 [2 ] 等领域具有重要意义 .目前 ,光刻 [3] 、微触点印刷 [4 ] 和自组装 [5] 等多项技术已被用来构建各种纳米模板 .1 999年 ,美国西北大学 Mirkin小组 [6 ]发明的 Dip- pen纳米刻蚀技术 (简称 DPN技术 )更在可控组装方面显示出巨大优越性 .这项技术是在一定驱动力作用下 ,使吸附在原子力显微镜 ( AFM)针尖上的分子“墨水”逐渐转移到基底表面上 ,实现纳米模板的可控构建 .与传统技术相比 ,DPN技术可在纳米尺…     

纳米晶La_（1－_x）Sr_xFeO_3的合成及气敏特性的研究

用柠檬酸盐法合成出Ｌａ_（１－_ｘ）Ｓｒ_ｘＦｅＯ_３（ｘ＝０．１，０．２，０．３，０．４）原粉，再经固相反应得到纳米晶粉末，用ＴＧ、ＤＴＡ、ＸＲＤ、ＩＲ进行了表征，确证复合氧化物Ｌａ_（１－_ｘ）Ｓｒ_ｘＦｅＯ_３为钙钛矿型结构，粒径在１０～２５ｎｍ之间。实验结果表明，随着固相反应条件不同，产物粒径呈规律性变化．气敏特性研究表明，该纳米晶材料对乙醇有较高的选择性和灵敏度，其选择性顺序为Ｌａ_（０．９）Ｓｒ_（０．１）ＦｅＯ_３＞ＬａＦｅＯ_３＞ＬａＦｅＯ_３（大晶粒）。     

CRYSTALLIZATION AND MECHANICAL PROPERTIES OF POLYPROPYLENE FILLED WITH SiO2 NANOPARTICLES

Oleic acid （OA）-modified SiO2 （OA-m-SiO2） nanoparticles were prepared using surface modification method. Infrared spectroscopy （IR） was used to investigate the structure of the OA-m-SiO2 nanoparticles, and the result showed that OA attached onto the surface of SiO2 nanoparticles through esterification. Effect of OA concentration on the dispersion stability of OA-m-SiO2 in heptane was also studied, and the result indicated that OA-m-SiO2 nanoparticles were dispersed in heptane more stably than the unmodified ones. OA-m-SiO2 nanoparticles can also be dispersed in polypropylene （PP） matrix in nano-scale. The effect of OA-m-SiO2 on crystallization of PP was studied by means of DSC. It was found that the introduction of OA-m-SiO2 resulted in significant increase in the crystallization temperature, crystallization degree and crystallization rate of PP, and OA-m-SiO2 could effectively induce the formation of β-crystal PP. Effect of OA-m-SiO2 content on mechanical properties of PP/OA-m-SiO2 nanocomposites was also studied. The results show that OA-m-SiO2 can significantly improve the mechanical properties of PP.     

A Novel Synthesis of Two-dimensional Nanopatterned TiO2 Thin Film

Recently the research on structures with an ordered two-dimensional(2D) pattern has attracted great attention due to its versatile applications in the fields of microelectronic and optoelectronic devices, displays, biochips and sensors, enzymatic immobilization, drug carriers, and photonic band gap materials. Various well-arrayed 2D structures have been made by the modern technique such as laser writing pattern fabrication, photoetching technique, micro-electromechanical systems based on scann…     

DNA为模板的铂纳米团簇沉积

Platinum nanoclusters were deposited along the supercoiled DNA strands after incubation of cis-(trans-1R，2R-diaminocyclohexane)(dl-camphorato)platinum(Ⅱ) (Cdp)， an analogue of the anti-tumor drug-carboplatin， with DNA and K₂PtCl₄ for 600 min and then through reduction of dimethylaminoborane (DMAB). The decrease of absorption of DNA at 260 nm indicates the coordination of Cdp and DNA. TEM and AFM were employed to characterize the morphologies and structures of platinum nanoclusters.     

纳米晶PbTiO3负载CuO催化NO分解

A large specific surface area perovskite-type mixed oxide PbTiO₃ supported cupric oxide was synthesized as a catalyst for NO decomposition and characterized by techniques such as XPS, XRD, H₂-TPR before and after NO decomposition reactions. The catalytic properties were tested with a fix-bed micro-reactor. The results showed that the PbTiO₃ was inactive for the reactions, but 1wt % Cu/PbTiO₃ catalyst gave fairly good activities for NO decomposition at temperature as low as 473 K. Copper species were found well-dispersed but weakly interacted with the support before NO decomposition, and the NO decomposition caused significant change in the environment of the copper species, which became Cu(Ⅰ) and most probably incorporated into surface crystal lattice of the nano-sized PbTiO₃. In NO reaction, a large amount of oxygen atoms from the decomposition of NO penetrated into the nano-sized PbTiO₃ support and caused small expansion of crystal lattice. The transport of oxygen between the copper species and the catalyst support may be helpful to speed up the kinetic regeneration of active metal sites from oxygen occupancy and resulted in good catalytic performance.     

用制备的纳米氧化铜直接合成三乙氧基硅烷的研究

合成了纳米氧化铜催化剂并进行了表征，对催化剂在溶剂中以硅粉与气态乙醇反应合成三乙氧基硅烷进行了研究，讨论了反应温度、催化剂用量、硅粉粒度、不同溶剂对反应的影响．并与CuCl催化剂进行了比较。