中药配方颗粒红外光谱法的快速鉴别

采用红外光谱法对中药配方颗粒及其辅料进行了鉴别研究。结果表明：不同生产厂商的配方颗粒中所添加的辅料类型及用量有较大差别；不同种的配方颗粒在辅料含量较低的情况下有较明显的指纹性，而辅料含量较高时，采用差谱技术可以提高谱图的指纹性，达到中药配方颗粒--鉴别的目的。该法简便、快速、可靠，是中药配方颗粒宏观质控的一个强有力的手段。     

循环流化床生物质气化炉内计算流体动力学模拟——鼓泡流化床内改进的颗粒床模型（英文）

采用改进颗粒床模型的CFD方法模拟了实验室规模冷模装置内鼓泡床的流体流动时空特性。模拟结果表明表观气速是影响气固动态特征和压力波动的主要因素之一：随表观气速的增大，气泡数目增加，气泡体积增大，压力波动增强；气速越高时均压降越大；在内循环鼓泡流化床内固体颗粒呈“单室”流型。上述与实验观察相吻合的模拟结果将有助于放大和设计商业化的内循环流化床生物质气化炉。     

球状蛋白质分子中氨基酸紧密接触对性质的研究

采用CSU软件 (Contactsofstructuralunits) ,对 61种球状蛋白质分子中氨基酸紧密接触对 (Residue residuecontact)进行了研究 .重点研究了不同氨基酸在形成远程紧密接触对 (Long rangecontact)和近程紧密接触对 (Short rangecontact)时的不同能力 .发现氨基酸Leu,Val,Ile,Met,Phe,Tyr,Cys,Trp(疏性氨基酸 ,H)比较容易形成远程紧密接触对 ,氨基酸Glu,Gln ,Asp ,Asn,Lys,Ser,Arg,Pro(亲水氨基酸 ,P)比较难形成远程紧密接触对 ,而氨基酸Ala,Gly,Thr,His(中性氨基酸 ,N)在形成远程紧密接触对时能力一般 .它们平均每个氨基酸可形成 6 0 3 ,3 64和 4 43个远程紧密接触对 .同时它们在形成近程紧密接触对时能力非常接近 ,平均每个氨基酸可形成的近程紧密接触对数目在 2 3 4～ 2 85变化 ,差别非常小 .亲水氨基酸 (P) ,中性氨基酸 (N)和疏水性氨基酸 (H)在蛋白质分子结构稳定性上起着不同的作用     

铂-金交替修饰的铂核纳米颗粒的制备与表征

通过吸附在铂纳米颗粒表面的氢交替还原氯金酸和氯铂酸,得到了复合型纳米颗粒Pt@Au/Pt,用UV-Vis光谱、TEM和XRD对其进行了表征.     

病毒性肝炎、肝硬化与微量元素

（1）病毒性肝炎与微量元素锌、硒、铜有关：张冠群等测定了128例乙肝患者血清微量元素含量。结果显示，慢性乙肝患者血清锌、铜、铁含量低于常人，急性肝炎患者血清锌铜铁与常人无差异。任仲轩测定了47例老年慢性病毒性肝炎患者与45例非老年患者血清微量元素含量。结果显示，两组锌、铜、硒含量皆低于健康对照。王晋升等测定了122例急慢性肝炎患者血清微量元素含量。     

单分散磁性纳米颗粒的制备及生物高分子在其上的组装

磁性纳米颗粒因其潜在的生物医学应用价值而成为纳米生物材料领域研究的前沿。本文综述了单分散磁性纳米颗粒的制备方法以及生物高分子在磁性纳米颗粒上的组装的研究进展。     

反相高效液相色谱法测定3种中成药中的葛根素

 建立了测定小儿清感灵片、步长新脑心通胶囊和感冒清热颗粒 3种中成药中葛根素含量的反相高效液相色谱方法。采用APEXODS色谱柱 ,以醋酸铵缓冲液 (10 0mmol/L ,pH 5 0 ) 甲醇 (体积比为 75∶2 5 )的混合溶液为流动相 ,检测波长为 2 5 0nm ,流速为 0 8mL/min。葛根素在 2mg/L～ 2 0mg/L时其色谱峰面积与质量浓度的线性关系良好 (r =0 9999) ;上述 3种中成药中的葛根素含量分别为 3 48mg/g ,1 0 8mg/ g及 1 5 2mg/ g(蔗糖型 ) ;其加样回收率分别为 99 0 % ,93 4%和 97 5 %。该法简便、快速、专属性强 ,可以作为多种中药制剂中葛根素含量的测定方法。     

一种基于分子信标荧光探针快速检测烟草花叶病毒的新方法

研究了一种利用新型荧光探针——分子信标进行植物病毒检测的方法，可以不要求对病毒RNA进行严格的分离和纯化，就能快捷地得到检测结果。此方法被用于烟草花叶病毒(tobacco mosaic virus，TMV)基因组RNA的检测，为植物病毒分子生物学的研究提供了新的手段。     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

CRYSTALLIZATION AND MECHANICAL PROPERTIES OF POLYPROPYLENE FILLED WITH SiO2 NANOPARTICLES

Oleic acid （OA）-modified SiO2 （OA-m-SiO2） nanoparticles were prepared using surface modification method. Infrared spectroscopy （IR） was used to investigate the structure of the OA-m-SiO2 nanoparticles, and the result showed that OA attached onto the surface of SiO2 nanoparticles through esterification. Effect of OA concentration on the dispersion stability of OA-m-SiO2 in heptane was also studied, and the result indicated that OA-m-SiO2 nanoparticles were dispersed in heptane more stably than the unmodified ones. OA-m-SiO2 nanoparticles can also be dispersed in polypropylene （PP） matrix in nano-scale. The effect of OA-m-SiO2 on crystallization of PP was studied by means of DSC. It was found that the introduction of OA-m-SiO2 resulted in significant increase in the crystallization temperature, crystallization degree and crystallization rate of PP, and OA-m-SiO2 could effectively induce the formation of β-crystal PP. Effect of OA-m-SiO2 content on mechanical properties of PP/OA-m-SiO2 nanocomposites was also studied. The results show that OA-m-SiO2 can significantly improve the mechanical properties of PP.