C-S-H中Al3+离子的固溶对表面吸附碱量的影响

研究了Al3+离子的固溶对C-S-H表面吸附Na+离子量的影响.实验结果表明,Al3+离子固溶于C-S-H结构中将使C-S-H表面所带的负电量增大,因而也就增大了C-S-H表面对Na+离子的吸附能力.     

Entangled States Based on Two Coherent States 3π/2 out of Phase

Entangled states based on two coherent states 3π/2 out of phase with each other, i.e. ｜α〉 and e^iФ｜-iα〉, as well as on a special state with a relative phase Ф = ｜α｜^2, are constructed. By analysing the amount of entanglement it is evident that entangled states based on this special state can be used as an excellent resource for quantum teleportation. It is also revealed that these entangled states possess some nonclassical features.     

Scheme for Robust Long-Distance Continuous Variable Quantum Key Distribution

It is shown that the configuration of phase coding for quantum key distribution with single photon can also be used for continuous variable quantum key distribution. Therefore the robust long-distance high-speed quantum key distribution can be achieved with current technology.     

氧碘化学激光气固相化学反应体系热力学分析

氧碘化学激光器（COIL）的发展已经到了提高系统安全性和工作环境适应性、降低系统复杂性阶段，而改进O2（^1△g）的产生方式和方法正是这个阶段的重要工作内容之一。近期，美国空军研究实验室运用气-固相反应方式产生O2（^1△g）。采用碱金属过氧化物或碱土金属过氧化物与卤化氢反应，生成O2（^1△g）。通常气一固相反应有着反应速度慢，接触面积小，反应产物难以脱出固体表面的缺陷，使得产出率低，而不被广泛采用。但随着表面化学研究的突飞猛进，借助表面活化分子，特殊性质的表面构造，大表面的构造，都为气一固相反应的进行提供了可行途径。如果此方法能用在氧碘激光器上，将克服传统方法的诸多不足。     

热处理条件对双粉工艺中Bi—2212粉末的相组成影响

实验研究了Bi-2212粉末在空气，8％O2和纯O2种处理的相组成特征，指出通过改变热处理温度和气氛可控制前驱粉中对2223成相影响较大的(Bi，Pb)-2212相，Ca2PbO4相，2201相和14：24AEC等相。     

低进汽压力下超音速两相流升压特性实验研究

本文采用实验方法研究了进汽压力为0.2 MPa以下时,由蒸汽喷嘴、混合腔及相应的阀门和管道组成超音速汽液两相流升压加热装置的运行特性。实验表明在进汽压力为0.1 MPa-0.2 MPa时,超音速汽液两相流升压加热装置都可稳定可靠地运行,且升压效果明显,可满足电力、供暖、轻工等许多行业蒸汽加热的要求。     

Self-assembly behaviour of amphiphilic diblock copolymer in selective solvents studied by synchrotron small-angle x-ray scattering

The aggregation behaviour of styrene-vinyl benzoic acid (PSm-b-PVBAn) amphiphilic diblock copolymers in selective solvents with different m and n was investigated by synchrotron small-angle x-ray scattering (SAXS). We have carried out a detailed analysis of scattering intensity, dimension, shape and microstructure of the diblock copolymers of narrow distribution in water, methanol, ethanol and isopropanol selective solvents, respectively. We have found that the aggregation behaviour of the copolymer depends on the nature of the solvent and the micelle forms fiat disc objects with the ratio of radius ω=0.4. The average radius gyration Rg of the copolymer decreases as solvents change from isopropanol to ethanol and to methanol, and increases with increasing pH in aqueous solution, but decreases with the addition of COCl2 in ethanol solvent. The scattering intensity of diblock copolymer micelle follows I(h) ∝ h^-α in different selective solutions, suggesting that the PSm-b-PVBAn coils have self-similar structure behaviour or a fractal structure in the selective solvents. All of these revealed that the aggregation behaviour of the diblock copolymer changes dramatically with experimental condition in the selective solvent. The increase of mass fractal dimension (Dm) from 2.12 to 2.47 indicates that the copolymer chain changes from a swollen coil to a rather compact disc in the course of changing solvents, decreasing surface fractal dimension (Ds) from 2.98 to 2.58 indicates that the copolymer micelle change from a rather rough surface to a smooth form in the course of increasing pH in aqueous solutions, and increasing Dm and Ds from 2.29 to 2.35 and 2.70 to 2.90, respectively, indicates the shrinkage of copolymer micelle to a rather compact and rough disc form by adding COCl2 in ethanol solvents.     

反相薄层色谱法添加环糊精流动相分离d、l-色氨酸

研究了用β-环糊精(β-CD)作为流动相手性添加剂，在反相C18板上分离d、l-色氨酸对映体的薄层色谱法。该法不需将色氨酸进行衍生，流动相最佳组成配比为β-CD饱和溶液：甲酸t甲醇=9:2:1(V／V／V)，最佳分离温度为50℃。d、l-色氨酸对映体相对比移值α为1．35。     

酸糖蛋白手性柱分离6种手性化合物

通过考察缓冲液种类、浓度及其pH值对对映体在手性柱上的保留和分离行为的影响,以及流动相中加入不同种类、不同浓度的不带电荷的有机溶剂乙腈、甲醇、正丙醇、异丙醇、流动相流速和柱温对对映体分离能力的影响,优化了含碳手性中心的碱性药物苯丙哌林、酸性化合物MT-A5及MT-酸和含硫手性中心的质子泵抑制剂奥美拉唑、泮托拉唑、雷贝拉唑对映体分离条件,最佳手性分离条件为:苯丙哌林,0.05 mol/L磷酸二氢铵缓冲液(pH 3.0)-乙腈(95∶5,V/V)为流动相,流速为0.7 mL/m in,柱温为20℃;MT-A5及MT-酸,流动相为0.01 mol/L醋酸铵缓冲液(pH 5.0)-乙腈(74∶26,V/V),流速为0.9 mL/m in,柱温为20℃;泮托拉唑,流动相为10 mmol/L醋酸铵缓冲液(pH 5.5)-乙腈(93∶7,V/V),流速为0.9 mL/m in;柱温为20℃;奥美拉唑和雷贝拉唑,流动相为0.01 mol/L醋酸铵缓冲液(pH 3.0)-乙腈(95∶5,V/V),流速为0.7 mL/m in,柱温为20℃。实现了应用高效液相色谱法在α1-酸糖蛋白手性柱上对上述化合物的对映体分离,并成功用于手性药物合成中的对映体过量百分率的测定。     

制备介孔复合环境材料的酸洗刻蚀工艺

探索了一种制备介孔复合环境材料的方法--破坏式造孔与有机复合相结合,使最终产品可大量吸附污染水体中的各种污染物并具有一定的杀菌功能.该方法通过酸洗刻蚀,达到了去除原材料中的杂质和刻蚀孔径的目的,所制备的中间产品24h吸湿率为原材料的2倍,染料吸附量为原材料的1.6倍.