Chemoselective hydrogenolysis of tetrahydrofurfuryl alcohol to 1,5-pentanediol over Ir-MoOx/Si02 catalyst

In this work, MoOx promoted Ir/SiO2 catalysts were prepared and used for the selective hydrogenolysis of tetrahydrofurfuryl alcohol （THFA） to 1,5-pentanediol in a continuous flow reactor. The effects of different noble metals （Ir, Pt, Pd, Ru, Rh）, supports and Ir contents were screened. Among the investigated catalysts, 4 wt%Ir-MoOx/SiO2 with a Mo/Ir atomic ratio of 0.13 exhibited the best catalytic performance. The synergy between Ix particles and the partially reduced isolated MoOx species attached on them is essential for the excellent catalytic performance of Ix-MoOx/SiO2. The catalyst exhibited a better hydrogenolysis efficiency of THFA with the selectivity of 1,5-pentanediol of 65%-74% at a conversion of THFA of 70%-75% when the initial THFA concentration is ranging from 20 wt% and 40 wt%. And higher system pressure was also in favor of the conversion of THFA. During a stability test, the conversion of THFA and 1,5-pentanediol yield over Ix-MoOz/SiO2 decreased with reaction time, which can be explained by the leaching of Mo species during the reaction.     

可调苯氧基修饰的聚(苯乙烯-苯乙烯基膦酸)-磷酸氢锆固载手性Mn~III(Salen)高效催化烯烃环氧化（英文）

使用不同空间位阻的苯氧链接手臂修饰的聚(苯乙烯基-苯乙烯膦酸)-磷酸氢锆轴向固载手性MnIII(Salen)催化剂(Cat1–Cat3),随后在间氯过氧苯甲酸(m-CPBA)为氧化剂的体系中考察了固载催化剂的催化性能.同时,在相同氧化体系下测试了一系列均相催化剂类似物(Cat4–Cat6).结果表明,在非均相条件下,可调变苯氧链接手臂的邻位取代基对催化剂活性起着重要作用,环氧化产物的对映选择性随着取代基位阻的增加而增大,但产物转化率有一定程度下降.此外,非均相催化剂即使在没有轴向助剂的参与下(通常需要添加,为了增大催化活性)仍然表现出非常高的催化活性,尤其对α-甲基苯乙烯反应,其对映选择性从6.8%增加到76.8%,转化率从19.8%上升到90.7%.制备的非均相催化剂11次的循环使用实验表明,在前5次使用后催化剂活性与对映选择性没有明显变化.     

主链含酰亚胺环和炔基的聚酰亚胺型聚氨酯弹性体的合成及阻燃性能

以均苯四甲酸酐、 D,L-苯丙氨酸和1,4-丁炔二醇为原料合成了一种含有酰亚胺环和炔基的二醇, 并以其为扩链剂, 采用预聚体法, 与4,4-二苯基甲烷二异氰酸酯(MDI)和聚四氢呋喃醚二醇(PTMG)反应, 合成了不同硬段含量的主链含有酰亚胺环和炔基的热塑性聚酰亚胺型聚氨酯弹性体. 用红外光谱(FTIR)、 电子拉力机、 热失重分析(TG)、 广角X射线衍射(XRD)、 UL-94垂直燃烧和极限氧指数对聚酰亚胺型聚氨酯弹性体进行了表征. 结果表明, 这种聚氨酯呈现出无定形结构; 其拉伸强度随着硬段含量的增加而增大; 与传统的热塑性聚氨酯相比, 酰亚胺环和炔基改性的聚酰亚胺型聚氨酯弹性体的热分解过程非常缓慢, 呈现出较好的热稳定性; 不同硬段含量的聚酰亚胺型聚氨酯弹性体的UL-94垂直燃烧均达到V-2级别; 其极限氧指数随着硬段含量的增加而增大.     

含磷钼酸的超分子复合材料的制备和结构研究

介绍了一类端基含羧基结构的液晶性表面活性剂CDDA通过静电相互作用与磷钼酸(HPMo)进行复合,得到表面包覆柔性烷基链和羧基端基的复合物SEP-PMo,并通过元素分析、热失重等方法确认其化学结构.该复合物表现出稳定的液晶相,DSC,PLM,SAXS和TEM等研究表明其为层状相结构.进一步将SEP-PMo复合物与P4VP混合,通过羧基与吡啶环上氮的氢键相互作用,得到稳定的PMo和聚合物的复合物,同时对比研究了HPMo与P4VP直接共混后的静电复合物结构,表明经表面活性剂修饰后的PMo可在聚合物中保持其聚集态结构.     

A New Porous Cadmium(Ⅱ) Complex Based on 1,10-Phenanthroline Derivative and Dicarboxylate:Syntheses,Structure, Thermal Behavior and Luminescence

A new porous Cd(Ⅱ) coordination compound, namely, [Cd(bpdc)(L)2]·3H2O(1, L = 11-fluoro-dipyrido[3,2-a:2,3-c]phenazine and bpdc = 1,1-biphenyl-2,2-dicarboxylate) was synthesized under hydrothermal conditions, and characterized by single-crystal X-ray diffraction. It crystallizes in tetragonal, space group P4122 with a = 9.8486(4), b = 9.8486(4), c = 45.925(4)A, V = 4454.5(5) 3, Z = 4, C50H29 Cd F2N8O7, Mr = 1004.21, Dc = 1.497 g/cm3, F(000) = 2028, μ(Mo Ka) = 0.562 mm-1, R = 0.0566 and w R = 0.1585. Each Cd(Ⅱ) atom is coordinated by one bpdc anion and two L ligands to give a discrete molecule. Neighboring discrete molecules are stacked by π-π interactions among L ligands, resulting in an interesting 1D supramolecular chain. Moreover, the 1D supramolecular chains are packed with each other to give a porous structure, in which an infinite channel is filled with water molecules. In addition, the thermal behavior and luminescent property of 1 have also been studied.     

有机碱催化的H-亚磷酸酯与靛红及其衍生物的phospho-Aldol-Brook重排串联反应

在温和的反应条件下,以1,1,3,3-四甲基胍(TMG)或1,8-二氮杂二环[5.4.0]十一碳-7-烯(DBU)有机碱作为催化剂,催化H-亚磷酸酯与靛红的phospho-Aldol-Brook重排串联反应,高效、高产率合成了两个系列α-羟吲哚基-磷酸酯类化合物.     

超高交联树脂的功能基化及应用研究进展

作为一类新型的复合功能吸附材料,含功能基的超高交联树脂以其较高的比表面积、刚性的骨架、良好的亲水性、较高的机械强度、可调的孔径结构、良好的选择吸附性和易再生的优势已在许多领域得到广泛应用。本文综述了近年来不同功能基修饰的超高交联复合功能树脂的合成方法、功能基对目标吸附质的选择性机理以及该类新吸附材料在废水处理、药物分离提纯、化学分析等领域的应用研究进展,最后对超高交联复合功能树脂的进一步推广应用中面临的问题提供了建议和展望。     

松香基季铵盐为模板剂有序超微孔二氧化硅的合成

以松香基季铵盐(脱氢枞基三甲基溴化铵,标记为DTAB)为模板剂、正硅酸乙酯为硅源、氨水为碱性介质成功合成出具有纳米片状形貌的六方有序超微孔二氧化硅材料。采用X射线衍射、N2吸附-脱附、透射电镜、扫描电镜等手段对样品进行表征,结果表明,体系中模板剂添加量、硅源添加量、碱性介质添加量、晶化温度、搅拌时间对前驱体的有序度有着较大的影响。当物质的量之比为nSi O2∶nDTAB∶nNH3·H2O∶nH2O=1.0∶0.1∶11.3∶924.0,晶化温度为373 K,搅拌时间为24 h,所得样品有序度最高。经煅烧后样品具有较大的比表面积(1 024 m2·g-1)和孔容(0.56 cm3·g-1),以及狭窄的孔径分布(集中于1.80 nm)。     

TiO2修饰La0.6Sr0.4Co0.2Fe0.8O3-δ用于中温固体氧化物燃料电池的阴极

纳米TiO2修饰的La0.6Sr0.4Co0.2Fe0.8O3-δ(LSCF)阴极被直接应用于YSZ电解质电池上. TiO2可阻止LSCF和YSZ间的化学反应,抑制SrZrO3的形成. LSCF-0.25 wt% TiO2阴极电池在0.7 V和600°C下的电流密度是LSCF阴极电池的1.6倍.电化学阻抗谱结果表明, TiO2修饰显著加快了氧离子注入电解质的过程,这可能与TiO2抑制了阴极/电解质界面处高电阻SrZrO3层的形成有关.本文为在ZrO2基电解质上使用高性能的(La,Sr)(Co,Fe)O3阴极材料提供了一种简单有效的方法.     

Preparation and characterization of polyphenylene sulfide-based chelating fibers

A series of novel chelating fibers containing sulfur, nitrogen, oxygen heteroatoms were prepared via the functionalization of chloromethylated polyphenylene sulfide （CMPPS）. The structures, micromorpholo- gy and physicochemical properties of these fibrous adsorptive materials were characterized by FT-IR, elementary analysis, TG and SEM-EDS. The results show that chelating fibers had high functional group contents （3.94 mmol/g for thiourea, 3.85 mmol/g for mercapto, 5.00 mmol/g for methylamine and 6.07 mmol/g for ethylenediamine, respectively）. Owing to the unique matrix of polyphenylene sulfide fiber, these fibrous adsorbents possess excellent thermostability. This synthetic method proved a simple and efficient way for the preparation of chelating fibers.