Aluminum Lon Removal from Monoaluminum Ovotransferrin by Pyrophosphate

The rates at which aluminum was removed from the N- and C-terminal monoaluminum ovotransferrins by pyrophosphate were evaluated by UV difference spectra in 0.01 mol/L Hepes, pH=7.4 and at 37℃. Pesudo first-order rate constants as a function of pyrophosphate concentration were measured. The results indicate that the pathways of aluminum removal are different. For the N-terminal binding site, aluminum removal follows simple saturation kinetics, while the removal of aluminum from the C-terminal binding site reverts to the combination of saturation and first-order kinetics. The saturation component is consistent with a rate-limiting conformational change in the protein as has been reported. We propose that the first-order kinetics mechanism is attributed to a pre-equilibrium process. The rate constants of saturation kinetics are accelerated from both terminals with the addition of 0.1 mol/L chloride to the monoaluminum ovotransferrin solutions, whereas the rates of the first-order kinetics are decreased for the C-terminal binding site. The effect of chloride ionic strength causes a continuing increase on kobs for the N- and C-terminal binding sites. Moreover, the kinetics behavior of the N-terminal is more easily affected by chloride than that of the C-terminal. In the experiment presumably the N-terminal site is apparently kinetically more labile than the C-terminal site.     

具有非正规自旋态的氮氧自由基桥联双镍配合物的合成,…

合成了４种氮氧自由基桥联的五氟丙酸镍双核配合物［Ｎｉ（ｐｒｐｒ）２］２ＮＩＴＲ．ｎＨ２Ｏ对该配合物进行了元素分析和热重－热分析，测定了红外光谱、紫外－可见光谱、电子顺磁共振和摩尔导，讨论了配合物的结构，测量了［Ｎｉ（ｐｆｐｒ）２］ＺＮＩＴｐｈＣｌ．４Ｈ２Ｏ和［Ｎｉ（ｐｆｐｒ）２］ＺＮＩＴＰｈＯＭｅ．４Ｈ２Ｏ的变温磁化率（４－３００Ｋ），表明配合物具有非正规自旋态的Ｎｉ（Ⅱ）－Ｃｕ（Ⅱ）三核体系的地     

杂环光化学——Ⅺ.1,3-二甲基-6-氮杂胸腺嘧啶和丙酮的光反应

研究了1,3-二甲基-6-氮杂胸腺嘧啶和丙酮的光反应。反应机理中包含有三线态激基复合物和由此相继形成的两个不同结构的双自由基作为反应中间体。最终得到了1:2的加成产物, 即2,2,4,4,6,8,10-七甲基-7,9-二氧代-3,5-二氧杂-1,8,10-三氧杂双环[4,4,0]癸烷(Ⅰ)。     

(2S,3S,4R)-2-正戊基-3,4-二叠氮基四氢噻吩的合成

以（＋）－4，10－二氧杂三环[5.2.1.O^2,6]－癸－8－烯－3－醇为原料。经8步反应，对映选择性地合成出去氧维生素H的重要中间体：（2S，3S，4R）－2－正戊基－3，4－二叠氮基四氢噻吩。为对映选择性合成手性四氢噻吩类化合物提供了新的方法。     

5-取代-1H-1,2,4-三氮唑-3-羧酸的合成

三氮唑类化合物具有很强的生物活性[1,2],尤其是利用5 氨基 1H 1,2,4 三氨唑 3 羧酸为原料制得的Schiff碱具有较强的生根性能和较好的细胞分裂活性[3,4]本文以5 氨基 1H 1,2,4 三氨唑 3 羧酸为原料,经Sandmeyer反应将 NH2转变 Cl、 Br、 I和 CN。其合成路线如下:1　实验部分1 1　仪器与试剂Impact 420型傅里叶红外光谱仪;HP8452A二极管阵列紫外/可见光光度计;PE 2400型元素自动分析仪:XL 200MHz超导核磁共振仪;M 80AGC/MS质谱仪。5 氨基 1H 1,2,4 三氮唑 3 羧酸(工业纯,武汉中储鹤翔新技术有限公司,纯度95%以上),其余试剂均…     

压力、温度和晶粒尺寸对Fe-N合金的合成及结构的影响

在 1× 1 0 - 3 Pa～ 4 GPa的压力和 5 80～ 930 K温度范围内 ,利用高压技术并结合机械球磨 ,研究了压力、温度和晶粒尺寸对α-Fe与非晶 BN的固态反应的影响 .发现高压和晶粒细化可以极大地促进α-Fe和非晶 BN的固态反应过程 ,α-Fe与非晶 BN发生固态反应的临界晶粒尺寸约 8nm.压力和温度对反应产物及其晶体结构有明显影响 .2 GPa和 80 0 K时 ,反应产物为具有正交结构的 Fe-N新相 ;在 3～ 4 GPa和 690～80 0 K时 ,可形成单一ε-Fex N合金相 ;而在 4 GPa和 930 K以上 ,反应产物由 Fe-N合金相转变为 Fe3B相     

R2Fe17CNx的结构和磁性

采用适当的热处理,使碳原子和氮原子先后进入到R_2Fe(17)的结构中去。利用X射线折射和磁测量技术研究了R_2Fe_(17)CN_x的晶体结构和内禀磁性。碳、氮的加入使晶胞体和膨胀、居里温度升高、饱和磁矩增大,并加强了稀土晶位的轴各向异性。     

用热聚法固定指示剂的光纤氧气传感器研究

采用热聚法将甲叉双丙烯酰胺（MBBA）聚合并共价交联在硅烷化的玻璃微珠上 ，同时将指示剂Ru（Ⅱ）-邻啡咯啉配合物物理包埋于聚合物中，研制了一种基于 荧光猝灭原理的光纤氧气传感器，采用NaHSO_3-O_2-MnSO_4体系引发MBBA水溶液热 聚合后应，通过确定NaHSO_3,MnSO_4,MBBA和Ru(phen)_3Cl_2的最佳反应浓度以及 玻璃微珠的尺寸，优化了聚合反应条件，改善了指示剂的固定效果，制备了性能较 好的传感器探头，该传感器的检测下限为5×10~(-6)(V/V)，响应时间为10s该传感 器连续工作50min,重复性标准偏差为±1%。     

水热改性对NiMo/γ-Al2O3加氢脱氮催化剂结构及性能的影响

The influence of hydrothermal modification on the structure and hydrodenitrogenation (HDN) activity of NiMo/γ-Al₂O₃catalyst was studied in the range 140～180 ℃. The experimental results indicated that the hydrodenitrogenation reaction rate of pyridine was accelerated using the NiMo/γ-Al₂O₃catalyst synthesized via hydrothermal route due to the change of the structure, the increase of the amount of Mo and Ni and the rise of the specific surface area. The change of the structure of catalysts was enhanced at higher hydrothermal temperature, producing NiMo/γ-Al₂O₃catalyst with better HDN activity.