氟化铵快速分解－电感耦合等离子体质谱法测定地球化学样品中的稀土元素

测定地球化学样品中的微量稀土元素常用混酸分解法或碱熔融法,这些常规方法往往存在耗费试剂量多、基体效应大、操作周期长等缺点。本文采用氟化铵作熔剂,在旋盖聚四氟乙烯坩埚中220℃熔融样品,后采用2毫升硝酸和0.5毫升高氯酸、硫酸（1+1）在电热板上继续分解,建立了氟化铵分解 －电感耦合等离子体质谱法测定岩石、土壤和水系沉积物中15种微量稀土元素的分析方法。本方法能快速、有效地分解样品,经三种国家标准物质验证（岩石、土壤、水系沉积物）,方法的准确度ΔlgC在0.001～0.02之间,测定值与认定值相符。方法检出限为0.001～0.04μg／g之间,精密度RSD%在1.11％ ～4.85％之间,能够满足微量稀土元素的分析要求,方法具有简单快捷、消耗试剂少、检出限低、精密度与准确度好等特点,适合于地球化学等地质样品微量稀土元素的批量快速分析测定。     

树枝状聚酰胺胺负载TEMPO的合成及其催化分子氧氧化醇的性能

以乙二胺和丙烯酸甲酯为原料,经过重复Michael和酯氨解反应,制备出二代(2.0 G)树枝状聚酰胺胺(PAMAM).PAMAM与2,2,6,6-四甲基哌啶酮氮氧自由基经缩合、还原将PAMAM与2,2,6,6-四甲基哌啶氮氧自由基(TEMPO)键连,得到PAMAM负载的TEMPO(PAMAM-TEMPO).采用1H NMR、13C NMR以及FT-IR等手段对中间体及最终产物进行了表征.将PAMAM-TEMPO与CuBr2以及2,2-联吡啶结合构成催化体系,用于分子氧为氧化剂的醇的选择性氧化反应,结果表明该体系对苄基以及烯丙基伯醇的氧化显示出良好的催化活性和选择性.结果还证明,TEMPO的负载使氧化产物醛很容易与催化体系分离,而且催化剂可以循环使用.     

Oxygen permeation and phase structure properties of partially A-site substituted BaCo_(0.7)Fe_(0.225)Ta_(0.075)O_(3-δ) perovskites

Ba0.9R0.1Co0.7Fe0.225Ta0.075O3-δ(BRCFT, R = Ca, La or Sr) membranes were synthesized by a solid-state reaction. Metal cation Ca2+,La3+or Sr2+doping on A-site partially substituted Ba2+in BaCo0.7Fe0.225Ta0.075O3-δoxides, and its subsequent effects on phase structure stability, oxygen permeability and oxygen desorption were systematically investigated by XRD, TG-DSC, H2-TPR, O2-TPD techniques and oxygen permeation experiments. The partial substitution with Ca2+, La3+or Sr2+, whose ionic radii are smaller than that of Ba2+, succeeded in stabilizing the cubic perovskite structure without formation of impurity phases, as revealed by XRD analysis. Oxygen-involving experiments showed that BRCFT with A-site fully occupied by Ba2+exhibited good oxygen permeation flux under He flow, reaching about 2.3mL min-1 cm-2at 900 ℃ with 1 mm thickness. Of all the membranes, BLCFT membrane showed better chemical stability in CO2, owing to the reduction in alkalinity of the mixed conductor oxide by La doping. In addition, we also found the stability of the perovskite structure under reducing atmospheres was strengthened by increasing the size of A-site cation(Ba2+La3+Sr2+Ca2+).     

基于四氮配体的铜配合物/TEMPO催化的苄醇与烯丙基醇的氧化反应

发展了非血红素类四氮配体的铜配合物和2,2,6,6-四甲基哌啶-氮-氧自由基(TEMPO)相结合的催化体系,应用于分子氧参与的伯醇氧化反应.该体系具有条件温和、高效、高选择性、无需任何助剂和底物(包括苄醇、烯丙基醇和含杂原子伯醇)使用性强等优点.此外,利用高分辨质谱和紫外-光谱等对反应活性中间体进行了初步探讨.     

改性炭黑-LaMnO3复合材料的制备及其共价复合效应对氧还原性能的影响

以VulcanXC-72炭黑为载体,通过对炭载体石墨化处理和表面化学修饰,将其与化学沉淀法制备的纳米级LaMnO₃颗粒共混,再经特定温度下煅烧,制备出改性炭黑-LaMnO₃复合材料.X射线光电子能谱和热重分析表明,当煅烧温度在300℃时,炭载体与LaMnO₃纳米颗粒之间形成了大量C-O-M（M=La,Mn）化学键.扫描电子显微镜和高分辨透射电子显微镜分析发现,纯相LaMnO₃纳米颗粒主要呈现短棒、三支棒或竹节棒的形貌特征,炭载体则为具有完整石墨层的空心球结构,LaMnO₃均匀分散在炭载体上.在25℃,1mol/LNaOH溶液中的电化学测试结果表明,成分比（LaMnO₃：C）为2：3的复合材料具有很高的氧还原电催化活性,氧还原反应电子数为3.81,中间产物H₂O₂产率为9.5%,其活性接近商业Pt/C催化剂（E-TEK）.高的氧还原电催化活性主要归因于LaMnO₃纳米颗粒与炭载体之间形成了大量共价键.     

Synthesis and Crystal Structure of（S）-N-（hexahydro-2-oxo-1H-azepin-3-yl）-3-phenyl-2-propenamide

The title compound(S)-N-(hexahydro-2-oxo-1H-azepin-3-yl)-3-phenyl-2-propenamide(C15H18N2O2, Mr = 258.31) was synthesized by the reaction of(S)-α-amino-ε-caprolactam with 3-phenyl-2- propenoyl chloride. Its chemical structure was determined by 1H NMR, 13C NMR, H RMS and X-ray single-crystal diffraction. The crystal belongs to the monoclinic system, space group P21/n with a = 14.957(3), b = 4.884(1), c = 18.630(4), β = 95.91(3)o, V = 1353.7(5)3, Z = 4, Dc = 1.267 g/cm3, μ = 0.085 mm-1, F(000) = 552, R = 0.0671 and wR = 0.1547 for 2473 observed reflections with I 2σ(I).     

纤维状TiO2／Bi2O3光催化剂的制备及其光催化性能

研究了SrCo0．7Fe0．2Mo0．103-δ（SCFM）材料的相组成、微观结构、热膨胀系数、氧渗透性能和化学稳定性,其结果和文献中的SrCo0．8Fe0.2O3-δ（SCF）做了对比．通过EDTA-citric混合方法成功获得了纯相SCFM材料．SCFM材料在500-1050℃显示出比SCF材料更低的热膨胀系数（24×10^-6-29×10^-6／K）,表明其具有一种更稳定的结构,尽管由于Mo掺杂造成其透氧率比SCF材料低,但是SCFM的透氧率仍然维持在一个较高水平．证实SCF中的Mo掺杂能够阻止晶格中的有序-无序转变,提高了其在CO2下的化学稳定性．     

Pt（111）电极上O2与OHad的吸脱附及氧还原反应动力学

研究了Pt（111）电极在0．1mol／LHClO4溶液中O2吸附与OHad脱附及氧还原反应的动力学．研究发现OHad的可逆吸脱附速率很快;在氧还原的动力学或动力学与传质混合控制区,恒电位下氧还原的电流随反应时间缓慢衰减,在转速较大,扫速较慢的情形下正向扫描过程中氧还原的电流总是明显低于逆向扫描的电流;Pt／0．1mol／LHClO4从无O2切换到O2饱和时,其开路电位迅速从0．9V增加到1．0V．结果表明,Pt（111）电极上O2解离生成OHad速率很快,ORR过程中OHad会在表面缓慢积累,氧还原反应的动力学主要由反应 OHad＋H^＋＋e→←H2O的平衡热力学决定．     

Partially crystallized Pd nanoparticles decorated TiO2 prepared by atmospheric-pressure cold plasma and its enhanced photocatalytic performance

TiO2 decorated with partially crystallized Pd nanoparticles （Pd/TiO2-P） was successfully prepared by atmospheric-pressure dielectric barrier discharge cold plasma. The XRD and XPS analyses proved that Pd ions were reduced to partially crystallized metallic Pd nanoparticles in Pd/TiO2-P. The XPS spectra also indicated that an enhanced metal-support interaction was formed due to the existence of partially crystallized Pd nanoparticles with lower coordination number in Pd/TiO2-P. Photocatalytic activity of Pd/TiO2-P was much higher than that of TiO2 samples decorated with well crystallized Pd nanoparticles.     

过渡金属/氮掺杂石墨的制备及电催化氧还原

用简单的化学方法制备了过渡金属(TM)壳聚糖水杨醛席夫碱配合物,然后以此配合物为金属源和N源、以硝酸预处理石墨为载体,经热处理后制备了过渡金属/氮掺杂石墨催化剂TM-N-C-t(TM=Co,Ni,Cu;t=200,400,600,800,1 000℃).以此催化剂为修饰剂制备了玻碳修饰电极,并用循环伏安法(CV)和旋转圆盘电极(RDE)伏安法研究了催化剂TM-N-C-t的电化学行为和电催化氧还原(ORR)的催化性能,催化剂的组成和结构采用TG,FT-IR,XRD,XPS等技术进行了表征.研究结果表明,催化剂TM-N-C-t对ORR均显示不同程度的催化活性,其中以1 000℃热处理的钴基催化剂Co-N-C-1000的催化活性最好,其活性已接近相同条件下的商用催化剂JM 20%Pt/C,催化活性位主要为Co—N—C.根据扩散控制的不可逆反应的循环伏安行为,计算得到了TM-N-C-t催化剂电催化ORR的动力学参数,并以此提出了氧还原催化反应的机理,在活性最好的催化剂Co-N-C-1000修饰电极上,氧气以4e转移途径被还原为水.