ZnWo4：Cr^3＋的吸收光谱研究

本文通过对ZnWo4:Cr^3 晶体的光学吸收谱的观测资料^[1]的分析，假定Cr^3 杂质的有效晶场的八面体结构的变形后的D4晶场。采用Oh点群表象准对角型简化强场方案，导出了d^3-D4强场能量矩阵。首次计算了ZnWo4:Cr^3 的自旋允许谱精细结构。理论计算结果与实验吻合较好。     

掺杂离子导体的粒子交叠广义晶格模型及其电导的粒子尺度效应

提出了一种掺杂离子导体（ＤＩＣ）的粒子交叠广义晶格模型，由此模型，推导随机－电阻－网络（ＲＲＮ）理论中３种导电键各自组分的几率，并采用有效介质近似（ＥＭＡ）计算了ＤＩＣ系统的电导及其粒子尺度效应。     

聚苯胺的掺杂反应

系统地论述了聚苯胺的４种掺杂反应（质子酸掺杂，碘掺杂，光助氧化掺杂和离子注入还原掺杂），指出了聚苯胺的结构形式与掺杂途径的对应关系。发现全还原型聚苯胺可进行氧化（ｐ－型）掺杂；全氧化型聚苯胺可实现还原（ｎ－型）掺杂；只有处于中间化态时才显示出独特的“质子酸掺杂”现象。     

NaNO3掺杂Y2O3材料的制备及电流变性质

利用NaCO3和Y（NO3）3做主要原料，合成了一系列用稀土氧化物（Y2O3）作为基础材料的新型电流变材料——NaNO3掺杂Y2O3材料。对于这些材料的介电性质、微观结构和电流变性能的研究结果表明，NaNO3的掺杂可以明显地提高Y2O3材料的电流变活性。材料在二甲基硅油中的悬浮液的剪切应力随NaNO3在Y2O3中的掺杂程度有明显变化，当Na／Y（物质的量的比）为0．6时材料的电流变性能最好，     

Nd：YVO4晶体α向生长研究

采用固-液两相混合，使Nd2o3、Y2O3和V2O5在近常温条件下初步合成Nd：YVO4多晶原料，降低固相合成反应温度，减少V2O5在多晶原料制备过程中的挥发。讨论了α方向V单晶生长条件，采用提拉法，以(100)方向进行单晶生长，得到一系列掺杂浓度的Nd：YVO4单晶。     

Yb:FAP和Yb:C3S2-FAP晶体光谱的温度特性和选择激发

关键词：     

Gain Characteristics of Er^3＋-Doped Phosphate Glass Fibres

An erbium-doped phosphate glass fibre has been drawn by the rod-in-tube technique in our laboratory. The gain for the Er^3＋-doped phosphate glass fibre with different pump powers and with different input signal wavelengths is investigated. The 2.2-cm-long fibre, pumped by a single-mode 980-nm fibre-pigtailed laser diode, can provide a net gain per unit length greater than 1.SdB/cm. The pump threshold is about 50mW at the wavelength of 1534nm, and below 70roW at 1550nm. The gain linewidth of the Er^3＋-doped phosphate glass fibre is greater than 34 nm and can cover the C band in optical communication networks.     

Sn-C60薄膜的紫外吸收光谱和X-射线衍射谱分析

对Sn-C60薄膜进行紫外可见光吸收，X-射线衍射和扫描电镜的测定结果显示，薄膜样品紫外可见光吸收的两个短波段吸收峰比纯C60薄膜的吸收峰显著下降，说明Sn-C60薄膜的电子光吸收跃迁为间接跃迁，能带中有杂质能级的存在；样品的X射线衍射峰则对应于面心立方结构；扫描电镜结果显示薄膜为纳米级颗粒组成。     

Influence of Yb-Doped Nanoporous TiO2 Films on Photovoltaic Performance of Dye-Sensitized Solar Cells

Yb-doped TiO2 pastes with different Yb/TiO2 weight ratios are prepared in the sol-gel process to obtain dyesensitized solar cells （DSCs）. The nanocrystalline size of Yb-TiO2 becomes smaller and the lattice parameters change. Lattice distortion is observed and dark current is detected. It is found that a part of Yb existing as insulating oxide Yb2O3 state acts as barrier layers at the electrode-electrolyte interface to suppress charge recombination. A Yb-doped TiO2 electrode applied in DSCs leads to a higher open-circuit voltage and a higher fill factor. How the Yb-doped TiO2 films affect the photovoltaic response of DSCs is discussed.