LD Pump Single-Longitudinal-Mode Nd：GdVO4/RTP Solid-State Green Laser

The single-longitudinal-mode Nd：GdVO4/RTiOPO4 （RTP） solid-state Green laser operation of a laser-diode （LD） end-pumped laser is realized by multi-cavities and a Brewster plate. The LD-pumped single-frequency green laser has been demonstrated by optimizing several parameters and a cavity length, with precise temperature controlling of Nd：GdV04, RTP and laser diode. When the incident pump power is 2 W at 808.4 nm, a single-frequency cw green laser at 532nm with output 210 m W is obtained, the optical-to-optical conversion efficiency is up to 10.5%.     

正态模糊格点的Feynman规则和轴矢流反常

在正态模糊格点费米子方案中,一个合理的自洽的Fourier变换显示了动量空间中周期性的破缺,从而避免了多余的费米子模.本文并讨论了弱耦合极限下模糊格点的费曼规则,计算了轴矢流反常的单圈微扰结果,获得了标准的Adler-Bell-Jackiw手征反常项.     

钢管混凝土拱桥矢跨比对稳定性的影响

钢管混凝土拱桥跨径大,宽跨比较小,横向稳定是桥梁安全性的关键,其数值的改善可通过改变矢跨比来实现。文章运用非线性稳定分析的基本理论,得出了某桥在风荷载作用下不同矢跨比的稳定性分析结果。结果表明:风荷载对该桥稳定性的影响较小,矢跨比影响较大,但选取矢跨比时应综合考虑,其取值范围在1/4￣1/6之间。     

Resource Search in Unstructured Peer-to-Peer System Based on Multiple-Tree Overlay Structure

We propose a multiple-tree overlay structure for resource discovery in unstructured P2P systems. Peers that have similar interests or hold similar type of resources will be grouped into a tree-like cluster. We exploit the heterogeneity of peers in each cluster by connecting peers with more capacities closer to the root of the tree. The capacity of a peer can be defined in different ways （e.g. higher network bandwidth, larger disk space, more data items of a certain type etc.） according to different needs of users or applications.     

浅谈飞模施工的各种技术

飞模可以借助起重机械从已浇筑完混凝土的楼板下吊运飞出转移到上层重复使用,故称飞模。飞模主要由平台板、支撑系统(包括梁、支架、支撑、支腿等)和其它配件(如升降和行走机构等)组成。适用于大开间、大拄网、大进深的现浇钢筋混凝土楼盖施工,尤其适用于现浇板柱结构(无柱帽)楼盖的施工。采用飞模用于现浇钢筋混凝土结构标准层楼盖的施工。楼盖模板一次组装,重复使用,从而减少了逐层组装、支拆模板的工序,简化了模板支拆工艺,节约了模板支拆用工,加快了施工进度。由于模板可以采取起重机械整体吊运,逐层周转使用,不再落地。从而减少了临时堆放模板场地的设置,尤其在施工用地紧张的闹市区施工,更有其优越性。     

背诵——基于模因论的英语输入策略

阐述了当前大学英语教学中语言输入不足之现状,提出了以模因论为理论基础的背诵输入策略,指出将背诵输入策略运用于英语教学的重大意义。     

Optical Fibre Mode Structures Measured by Collection Mode Near-Field Scanning Optical Microscopy

High order fibre mode structures are measured by a near-field scanning optical microscope (NSOM) and are determined to be consistent with the standard fibre LP patterns. The mode-field distortions of high-order mode LP11 and LP21 structures by far-field measurement are analysed based on scalar diffraction theory, and the maximum distortions may reach as high as 5.1% and 6.2%。 This shows that the method of using the NSOM is more accuracy than the far-field measurement method, especially for high-order mode structures of optical fibres.     

磁AB效应及其理论解释

本文介绍磁AB效应及其两种理论解释 ,进而说明经典电动力学具有局限性 ,量子力学是更高层次的物理理论     

离轴非球面轮廓测量导轨直线度误差补偿模型

由于研磨阶段非球面的面形误差将由几十微米收敛到几个微米,因此采用高重复精度的离散测量技术是决定误差收敛效率、影响加工进程的关键。在新一代数控光学加工中心(FSGJ Ⅱ)上,设计了双测头对非球面进行面形定量检测的轮廓测量机构。通过对测头运动导轨在x、z方向的直线精度的分析,建立了导轨直线度误差补偿模型,以较低的成本实现了较高的测量精度。     

Stancu-Sikkema算子的点态估计

本文构造了Stancu—Sikkema算子,并利用点态光滑模研究了此算子的点态逼近正逆定理.