Pt3Co核-Pt壳型纳米粒子的制备及磁性

Pt₃Co alloy nanoparticles were prepared by the reduction of H₂PtCl₆ and Co(OOCCH₃)₂ using NaBH₄ as a reducing agent. The Pt₃Co core-Pt shell nanoparticles (Pt₃Co@Pt) were synthesized using hydrogen absorption reduction and characterized by plasma-atomic emission spectrometry (ICP), transmission electron microscopy (TEM), X-ray diffraction (XRD) and SQUID magnetometer. The results show that average size of Pt₃Co@Pt nanoparticles is 3.6 nm with a standard deviation of 0.9 nm. Heating Pt₃Co nanoparticles in air at 700 ℃ for 1 h, Co in Pt₃Co nanoparticles was oxidized to Co₃O₄ and CoO; while no oxidation tendency was detected for Pt₃Co@Pt nanoparticles. The crystallize structure of Pt₃Co@Pt changed from the face centered cube (fcc) to the face centered tetragonal (fct) after the heating treatment. The coercivity of the heated Pt₃Co@Pt reached to 276 Oe at room temperature.     

MAA存在下VAc/BA核壳乳液聚合过程中的胶粒形态研究

用ＴＥＭ和电位滴定法对不同配方和工艺条件得到的胶粒形态结构和羧基分别进行了表征。结果表明：加入甲基丙烯酸有利于胶粒的稳定和形成规则的核壳胶粒。半连续加料不会形成完全反转的核壳结构,但是,核层在反应过程中由于聚合物簇的迁移会造成形变。由于胶粒中聚合物浓度高,粘度大,因而胶粒形态变化受动力学影响甚大,羧基分布主要是由动力学确定的。     

铝原子簇上化学吸附的尺度效应及其理论模型

对铝原子簇Al_n(n=1～10,12,13)已报导过的理论预测几何构型进行合理选择, 用量子化学CNDO/2法研究了单分子一氧化碳在这些簇上取不同吸附位形时的吸附作用。结果表明吸附强度随簇尺度的变化呈“幻数”特性: Al_2、Al_6、Al_(12)簇具有特别高的吸附能, 与实验观测结果相符。采用作者建议的推广电子壳模型可合理解释这一尺度效应。对Al_(12)和Al_(13)簇电子结构的分析进一步支持了壳模型的观点。随着簇的增大, 尺度效应逐步减弱并趋向于体相铝的性质。     

壳寡糖与镧、铈配合物的合成、表征及应用

合成了壳寡糖，镧和壳寡糖，铈配合物，用红外光谱和紫外光谱进行了表征，并证实了氮，金属(N-M)键的形成，元素分析证实配合物中各元素C：H：N：La或Ce的原子个数比分别接近于24：44：4：1，即相当于配位数为4。壳寡糖一镧和壳寡糖一铈较未配位的镧或铈具有更强的催化氧化能力。配合物除去废液中磷[(PO)^3-4]的效果比未配位的镧和铈提高10％。配合物可提高蔬菜、水稻种子的发芽率，促进作物的营养生长，提高水稻产量3，3％，提高黄瓜产量12％～15％，对十字花科蔬菜的病毒有一定的抑制作用。     

反应性复合乳液的合成、表征及其交联反应

利用种子半连续乳液聚合方法合成了核层或壳层带有环氧基以及壳层带有羧基的3种不同核/壳结构的乳胶粒子,通过物理共混带环氧基和羧基的乳胶粒子,得到了两种反应性复合乳液.利用透射电镜和激光动态光散射对乳胶粒子进行了表征,其粒径分布较窄,粒径分布的多分散系数为0.062,平均粒径约76 nm,乳胶粒子具有明显的核/壳结构.通过胶膜的凝胶率和膨胀率的测定和红外光谱分析对反应性复合乳液中乳胶粒子的扩散及交联反应进行了研究,并探讨了不同核壳结构复合乳液对涂膜机械性能的影响.研究表明,当反应性复合乳液中的环氧基和羧基分别分布在乳胶粒子的核层和壳层时,有利于聚合物分子链的充分扩散和化学交联反应的进行,从而提高涂膜的物理化学性能,当甲基丙烯酸缩水甘油酯(GMA)含量为10 wt%时,涂膜的拉伸强度达20.3 MPa.     

原位制备核壳结构CoFe2O4@多孔碳球吸波性能研究

CoFe₂O₄具有良好的化学稳定性和磁损耗,可用于制备具有独特结构的电磁波吸收复合材料。在本研究中,通过原位制备将CoFe₂O₄磁性粒子引入中空多孔碳中,制备了具有核壳结构的CoFe₂O₄@碳空心球。本文研究了微观组织与电磁波吸收性能的关系。研究结果表明:通过构建多孔结构并调整多孔碳和CoFe₂O₄的比例,可以有效地协调磁损耗和介电损耗。CoFe₂O₄@多孔碳复合材料的最小吸收在5.8 GHz时达到?29.7 dB。此外,有效吸收带宽为3.7 GHz在厚度为2.5 mm。复合材料的微波吸收性能的提升是由于在材料引入多孔核壳结构和CoFe₂O₄磁性粒子。多孔结构与核壳结构之间的协调有利于提高复合材料衰减系数,并实现良好的阻抗匹配。同时,多孔核–壳结构增强了电磁波在多次散射和反射;并提供了大的固体–空界面和CoFe₂O₄–碳界面来诱导界面极化,增强电磁波极化损耗。此外,CoFe₂O₄磁性粒子的引入增强了自然共振、交换共振和涡流损耗的磁损耗。     

Effects of Cone Angles on Nonlinear Vibration Responses of Functionally Graded Shells北大核心CSCD

The nonlinear vibration responses of functionally graded materials (FGMs) shells with different cone angles under external loads were studied. Firstly, the Voigt model was employed to describe the physical properties along the thickness direction of FGMs conical shells. Then, the motion equations were derived based on the 1st-order shear deformation theory, the von Kármán geometric nonlinearity and Hamilton’s principle. Next, the Galerkin method was applied to discretize the motion equations and the governing equations were simplified into a 1DOF nonlinear vibration differential equation under Volmir’s assumption. Finally, the nonlinear motion equations were solved with the harmonic balance method and the Runge-Kutta method, and the amplitude frequency response characteristic curves of the FGMs conical shells were obtained. The effects of different material distribution functions and different ceramic volume fraction exponents on the amplitude frequency response curves of conical shells were discussed. The bifurcation diagrams of conical shells with different cone angles, as well as time process diagrams and phase diagrams for different excitation amplitudes, were described. The motion characteristics were characterized by Poincaré maps. The results show that, the FGMs conical shells present the nonlinear characteristics of hardening springs. The chaotic motions of the FGMs conical shells are restrained and not prone to motion instability with the increase of the cone angle. The FGMs conical shell present a process from the periodic motion to the multi-periodic motion and then to chaos with the increase of the excitation amplitude. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

环向加筋圆柱壳轴向不均匀冲击响应

对轴向不均匀冲击载荷下环向加筋圆柱壳的动力响应进行了研究,在考虑了壳体及加筋肋骨骨的剪切变形和转动惯性的情况下,运用Ｈａｍｉｌｔｏｎ原理推导出壳体－肋骨系统的运动方程,并且采用一种半解析有限差分法进行求解,着重探讨了加筋肋骨对环向加筋圆柱壳动力响应的影响。     

新型网壳节点的弹塑性分析及试验研究

简要介绍了一种广泛应用于各类意志支,双层网壳结构的新型承插式节点,在弹塑性理论分析的基础上,进行了一组单向拉,压试验研究,为今后在实际工程中推广这种新型节点提供了可靠依据。     

长序厚壳桂的硬化侵填体

经光学显微镜和扫描电子显微镜观察,发现长序厚壳桂导管分子中存在丰富的硬化侵填体,这种侵填体的发育与导管－薄壁组织细胞间纹孔口的大小无关,而与轴向薄壁组织和射线有关。