蓝光相变光盘的多层膜结构设计

为了使光盘获得优良的记录／读出性能并能够长期稳定地使用，必须优化设计相变光盘的多层膜结构。采用自行设计的模拟分析相变光盘读出过程设计软件，从光学角度出发模拟计算了蓝光(405nm)相变光盘的膜层结构，研究了多层膜系的反射率和反射率对比度等光学参量与各层膜厚度和槽深的关系。研究得出的最佳多层膜结构为：下介电层／记录层／上介电层／反射层的厚度对于台记录为100nm／10nm／25nm，／60nm，而对于槽记录则为140nm／15nm／30nm，／60nm，槽深为50nm。模拟计算结果对于将来高密度蓝光相变光盘的制备具有一定的指导意义。     

偏滤器靶板磁预鞘层边界的离子流

利用流体力学模型研究了偏滤器等离子体条件下磁预鞘层边界离子流和预鞘层宽度之间的关系，并分析了粒子碰撞对预鞘层边界离子流的影响。由于粒子碰撞对离子的驱动效益，预鞘层边界离子流速度随着预鞘层宽度的增加而减少；只有当预鞘层宽度趋于零时，边界离子流沿磁力线的速度才趋近于离子声速。在固定预鞘层宽度的条件下，计算了预鞘层边界离子流速度与碰撞频率之间的函数关系。     

Equivalent Antisymmetry Performance of Three—Dimensional Heterogeneous Anisotropic Composites

Starting from the physical features of materials, heterogeneous anisotropic composites (HAGs) are analysed on the basis of the understanding and applications of its equivalent antisymmetry performance. Moreover, the design parameter is optimized to attain the goal of maximizing the use of materials, which is quite meaningful. The HAG structure is defined as a kind of equivalent structures according to the structure and properties of materials.We apply the mature plate theory and the composite materials laminate theory in analysis of the HAG structure,and in this way a new concept and a new idea are expected.     

Crystal Structure of Adduct 2-Phenyl-imidazo [ 4,5-f ] 1,10-phenanthroline Methanol

The structure of the title adduct comprises a phenanthroline derivative 2-phenyl-imidazo[4,5-f]1,10-phenanthroline and a methanol.The composition of the crystalline adduct was characterized as C19H12N4.CH3OH.It belongs to orthorhombic system,space group Pna21 with a=1.3693(4)nm,b=2.2988(7)nm,c=0.51338(15)nm,V=1.6160(8)nm^3.Z=4,and final R1=0.0423.wR2=0.1012 .Crystal structure shows that all the 19 carbon atoms and 4 nitrogen atoms are coplanar.The bond length data indicated that a very extensive conjugation system was formed.This conjugation makes the compound being a potentially excellent energy transformer used for luminescent materials.     

Release Behaviour of Shock Loaded LY12 Aluminium Alloy

By making use of a light gas gun, a specially designed target is impacted by the LY12 flyer, and the pressure is taken in the range of 0.6-3 GPa. Based on the stress profiles measured in the buffer materials by manganese gauges, the Hugoniot curve and release curves of LY12 aluminium alloy are obtained. Meanwhile, the release curves from different initial shocked states are described in both the pressure-particle velocity plane and the pressure-specific volume plane.     

新型发酵机的原理方案设计探讨

从系统功能出发,采用形态学矩阵的方法(是提出设计预选方案的有效方法),列出了实现每一个功能的子方案及其优缺点。经过组合,提出了发酵机设计的三个方案,通过方案比较得出了新型发酵机设计的最优方案,提出了双向螺旋搅笼的新型结构,这对于新型发酵机的设计、制造将有着重要的实用价值。     

僧帽牡蛎碱性磷酸酶功能基团的研究

采用化学修饰法研究僧帽牡蛎碱性磷酸酶活性功能基团性质.酶经0.4mmol·L-1PCMB修饰30min后活力仍然保持不变,提示巯基与酶的活力无关;用二巯基苏糖醇(DTT)对酶进行修饰,当DTT浓度达到2.5mmol·L-1时,酶活力丧失98%,表明硫 硫键与酶活力有密切的关系;以N 溴代琥珀酰亚胺(NBS)修饰酶的色氨酸残基,酶的修饰失活呈一级反应,当NBS浓度达到0.65mmol·L-1时,酶活力丧失100%,并辅以紫外吸收光谱的变化分析,表明色氨酸残基是酶催化活力所必需的;醋酸酐、马来酸酐、甲醛等氨基试剂对酶的修饰作用显示氨基是酶的必需基团.     

共轭下降法的全局收敛性

本文提出了一种Armijo型的线搜索，并在这种线搜索下讨论了共轭下降法的全局收敛性，且可得方法在每次迭代均产生一个下降搜索方向．     

桥头跳车的成因及处理方法

桥头跳车会增加行车风险并且会大大增加每年的养护费用．本文作者根据多年的养护管理及施工经验，对桥头跳车的成因从设计、施工及运营使用几方面进行了分析并提出了几种处理方法，尤其是对桥头搭板和土工格栅网两种目前工程界常用方法从设计机理到施工实践进行了比较详细的论述，同时对设计机理方面引入了相应的数学模型．