金纳米微粒作探针共振瑞利散射光谱法测定亚甲蓝

在pH为6.5~9.5的中性或弱碱性介质中, 金纳米微粒可与亚甲蓝(MB)阳离子靠静电引力及疏水作用力结合, 形成粒径较大的聚集体(平均粒径从12 nm增至20 nm), 这种聚集体的形成导致共振瑞利散射(RRS)强度显著增强, 最大散射峰位于371 nm. 在适当条件下, 散射强度(ΔI)与亚甲蓝浓度成正比. 该法具有高灵敏度, 将金纳米微粒作为测定亚甲蓝的高灵敏RRS探针, 对亚甲蓝的检出限为21.17 ng/mL, 该法简便, 快速, 且有较好的选择性, 可用于血液中亚甲蓝的测定.     

表面引发原子转移自由基聚合方法合成Fe3O4/PMMA复合纳米微粒

采用表面引发原子转移自由基聚合方法合成了核壳结构的磁性高分子纳米微粒. 作为聚合反应引发剂的3-氯丙酸, 首先与油酸修饰的Fe3O4纳米微粒表面的部分油酸置换, 然后在Fe3O4纳米微粒表面引发甲基丙烯酸甲酯聚合, 合成的纳米复合材料用TEM, FTIR, XRD和DSC表征. 磁性测试结果表明, 所制备的磁性高分子纳米微粒仍具有超顺磁性, 但由于聚合物的存在, 其饱和磁化强度降低.     

针形颗粒二氧化钛纳米薄膜的制备

使用醋酸修饰的溶胶-凝胶法制备了一种由针形颗粒构成的二氧化钛纳米薄膜.研究发现,可以通过控制溶胶-凝胶过程的反应条件控制所制备的纳米薄膜的形貌.对这种形貌的形成机理进行了讨论.     

Co3O4纳米粒子的固相合成及磁性研究

以Co(NO3)2.6H2O和NaOH为原料,用固相法合成了Co3O4纳米微粒。用XRD和FT-IR研究了反应进程,证明Co3O4在焙烧阶段形成。用TEM观察了Co3O4纳米微粒的形貌,用磁天平测试了其磁性。结果表明,固相法可以制得平均粒径为22 nm的铁磁性Co3O4纳米微粒,属立方晶系,形状为多角形。400℃焙烧2 h所得纳米Co3O4的磁性强度为1.7922×10-2mT-1。     

甲醛的铂微粒修饰玻碳电极伏安法测定

采用电化学沉积法制备了铂微粒修饰玻碳电极(Pt/GCE).通过循环伏安法研究了甲醛在该电极上的电化学行为,并优化了实验参数,在此基础上建立了一种伏安法直接测定甲醛的方法.在酸性溶液中,甲醛的氧化峰电流与其浓度在1.0×10-5～1.0×10-3mol/L的范围内呈良好的线性关系(r=0.999 7),检出限为5.0 μmol/L,回收率为96%～104%,相对标准偏差为4.0%～4.5%.     

Nanostructure Pt Electrode Obtained via Self-assembly of Nanoparticles on Conductive Oxide-coated Glass Substrate

Self-assembly of platinum nanoparticles were applied to fabrication of counter electrode for dye-sensitized solar cells on conductive oxide-coated glass substrate. The present Pt electrode exhibits high exchange current density of 220 mA/cm^2, which is comparable to those prepared by electrodeposition, magnetron sputtering or thermal decomposition of platinum chloride. After analysis by transmission electron microscopy (TEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), it was found that the catalyst was structurally characterized as nanosized platinum metal clusters and was continuously arranged on electrode surface. The present nanostructure electrode had high electrocatalytic activity for the reduction of iodine in organic solution.     

罗丹明6G缔合微粒荧光猝灭法测定痕量碘酸根

研究发现在0.01mol/LHCl-8.0×10-4mol/LKI介质中,罗丹明6G(RhG)在550nm处有1个荧光峰.当有IO-3,I-3与RhG形成缔合微粒,550nm处荧光峰猝灭,在320、400、6103存在时,IO-3与过量的I-反应生成I-nm处有3个共振散射峰,在470nm处有1个同步散射峰.碘酸根浓度在2.0～100×10-7mol/L范围内与荧光猝灭强度成线性关系.据此建立了一个测定食盐中IO-3的荧光猝灭分析法.光谱研究结果表明,(RhG-I3)n缔合微粒和界面的形成是导致体系荧光猝灭的根本原因.     

In Situ Fabrication of ZnS Semiconductor Nanoparticles in Layered Organic-inorganic Solid Template

Ordered ZnS semiconductor nanoparticles were in situ synthesized in metal halide perovskite organic/inorganic layered hybrids (CnH2n 1NH3)2ZnCl4 (n=10 and 12) by reaction of their spin-casting films with H2S gas. Transmission electron microscopy, UV-vis spectroscopy and small-angle X-ray diffraction were used to characterize the morphology and the structure of formed nanoparticles. Obtained results indicate an effective way to incorporate functional inorganic nanoparticles into structured organic matrices.     

The Surface Imprinted Polystyrene Beads Prepared via Emulsion Templates

In this paper, the surface imprinted cross-linked polystyrene beads were prepared via suspension polymerization with styrene (St), divinylbezene (DVB), polyvinyl alcohol (PVA1788),the mixture of Span 85 and xylene or the mixture of Span 85 and paraffin as monomer,cross-linking agent, dispersion stabilizer and templates, respectively. The results indicate that there are dense cavities on the surface of beads, and the diameter and density of cavity are related with the composition and amount of emulsion template. The forming mechanism of cavity from thermodynamics and dynamics was proposed.     

4-十二烷氧基苄胺在纳米金微粒合成中的应用

以新型表面活性剂4-十二烷氧基苄胺(C12OBA)构成的C12OBA/正丁醇/正庚烷/丙醛/HAuCl4(aq)反相微乳液作为微反应器,利用微波辐射加热-丙醛还原法制备了C12OBA包覆金纳米微粒;利用透射电镜、傅立叶变换红外光谱仪及X射线衍射仪分析了产物的微观形貌、化学键合特征、晶体结构;并测定了其紫外-可见吸收光谱.结果显示,表面活性剂C12OBA既可参与形成稳定的反相微乳液,又可作为金纳米微粒的良好保护剂.反相微乳液液滴的微小水核以及C12OBA/金的物质的量之比对纳米金微粒的尺寸和形貌起到良好的控制作用.