LaPO4纳米微粒的制备及表征

Surface-modified LaPO4 nanoparticales were synthesized in the mixture solvent of water-ethanol with the surface modification age of dialkylphosphate. The conditions of synthesis and characterization were discussed. The results indicated that nanoparticle core of LaPO4 and surface-modified layer were formed. The surface-modified nanoparticles of LaPO4 can be dispersed in organic solvent and has better lubricating properties.     

Nanostructure Pt Electrode Obtained via Self-assembly of Nanoparticles on Conductive Oxide-coated Glass Substrate

Self-assembly of platinum nanoparticles were applied to fabrication of counter electrode for dye-sensitized solar cells on conductive oxide-coated glass substrate. The present Pt electrode exhibits high exchange current density of 220 mA/cm^2, which is comparable to those prepared by electrodeposition, magnetron sputtering or thermal decomposition of platinum chloride. After analysis by transmission electron microscopy (TEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), it was found that the catalyst was structurally characterized as nanosized platinum metal clusters and was continuously arranged on electrode surface. The present nanostructure electrode had high electrocatalytic activity for the reduction of iodine in organic solution.     

示差脉冲伏安法测定乳酸脱氢酶活性及纳米微粒生物毒性检测新方法研究

采用示差脉冲伏安法，在乳酸脱氢酶(LDH)酶促体系“丙酮酸盐 + NADH +H⁺ (?) 乳酸盐 + NAD⁺”中，通过检测NAD⁺还原峰电流的变化，测定了不同条件下(不同酶用量、缓冲液pH值以及温度)LDH的活性、酶促体系的米氏常数K_m^NADH以及最大反应速率v_max。并且在最佳实验条件下，通过检测LDH活性的改变，实验考察了3种纳米物质(ZnS，TiO₂(R)和TiO₂(A))对乳酸脱氢酶酶促体系的影响。     

四苯硼钠-甲苯胺蓝缔合物纳米微粒体系减色效应研究

在PH4.0醋酸-醋酸钠介质中，甲苯胺蓝在600nm处有一个吸收峰，随着四苯硼钠浓度的增大甲苯胺蓝在600nm处吸收峰降低，颜色减弱，这是由于甲苯胺蓝-四苯硼钠缔合物分子间存在较强的疏水作用及分子间作用力，聚集形成纳米微粒所致，甲苯胺蓝-四苯硼钠纳米微粒体系亦在600mm处有1个吸收峰，在400mm、470mm和580mm处产生3共振散射峰，其中400mm和580mm为甲苯胺蓝-四苯硼钠复合纳米微粒产生的特征共振散射峰，这也表明有纳米微粒存在，丙酮浓度的影响实验结果等表明，纳米微粒的形成是产生其减色效应的原因。     

硫化镉钠米微粒在聚合物网络中的组装

硫化镉钠米微粒在聚合物网络中的组装黄金满，杨毅，杨柏，刘式墉，沈家骢（吉林大学分子光谱与分子结构重点实验室、集成光电子国家重点实验室，长春，１３００２３）关键词组装，纳米微粒，离子交换，透射电子显微镜，电子衍射由于纳米半导体微粒的物理和化学性质介于分...     

功能化离子液体中Ag纳米微粒的制备及摩擦学性能研究

合成了1-甲基-3-羟乙基咪唑四氟硼酸盐离子液体([C₂OHmim]BF₄)，用红外光谱表征了其结构。以所合成的离子液体作为还原剂、稳定剂与反应介质制备了Ag纳米微粒，用XRD和TEM对微粒的结构和形貌进行了表征。在四球摩擦磨损实验机上研究了[C₂OHmim]BF₄离子液体及掺入Ag纳米微粒后的离子液体的摩擦学性能。掺入银纳米微粒后，离子液体在高载荷下的润滑性有了大幅的改善。用SEM和XPS分别对磨痕表面的形貌和元素组成、化学状态进行了分析，结果表明：在低、高载荷分别起润滑作用的是有机膜和金属-有机复合膜。     

油溶性金属Ni纳米微粒的制备与表征

纳米材料的制备、性能与应用已成为近年来的研究热点之一犤１犦。由于在催化、光学和电学材料中的广泛应用，超细单分散的金属微粒的制备与性质已引起人们的广泛兴趣。通常制备金属纳米微粒的方法有两种：一是把固体金属材料分裂为纳米尺寸的颗粒，如机械粉碎、电弧放电及金属原子蒸气沉积犤２犦，用这种方法制备的金属微粒粒径一般都比较大，且粒子尺寸分布宽，另一种是把金属原子制成纳米尺度的颗粒，如乳液聚合法犤３犦、热解犤４犦、γ－射线辐照犤５犦、脉冲电沉积犤６犦和化学还原犤７犦等，这种方法制备的微粒粒径通常分布窄且粒子小…     

α-Fe2O3纳米微粒/硬脂酸交替L-B膜的结构表征

We reported in this paper FTIR linear diehroic spectroscopy and anisotropic properties of the nanoparticulate α-Fe_2O_3-stearate alternating Langmuir-Blodgett films (Fe_2O_3-St LB films) a new inorganic-organic quantum superlattice system. A new method fitted to inorganic-organic alternating films is used to study the molecular orientation and discuss the order arrangement of the nanopartieles in the films. The the results show that a configuration of stearate ions bound to the surface of the nano-particles: COO~- group are spherically bound to the surface of the nanoparticles; the hydrocarbon chains are almost perpendicular (31°±5°) to the substrate (7 nm-Fe_2O_3-St LB films). The orientation of hydrocarbon chains and CH_2 scissors vibration show the existence of trans-zigzag planar structure for C—C broken bone of the hy7drocarbon chains, which is related to high-order structure of the alternate films.     

The Surface Imprinted Polystyrene Beads Prepared via Emulsion Templates

In this paper, the surface imprinted cross-linked polystyrene beads were prepared via suspension polymerization with styrene (St), divinylbezene (DVB), polyvinyl alcohol (PVA1788),the mixture of Span 85 and xylene or the mixture of Span 85 and paraffin as monomer,cross-linking agent, dispersion stabilizer and templates, respectively. The results indicate that there are dense cavities on the surface of beads, and the diameter and density of cavity are related with the composition and amount of emulsion template. The forming mechanism of cavity from thermodynamics and dynamics was proposed.     

利用DPN技术直接构建磁性纳米图形

在纳米尺度下构建有序的磁性模板和图形是当前的研究热点之一 [1,2 ] .这种模板在生物样品的分离[1] 、磁电子学研究和信息存储 [2 ] 等领域具有重要意义 .目前 ,光刻 [3] 、微触点印刷 [4 ] 和自组装 [5] 等多项技术已被用来构建各种纳米模板 .1 999年 ,美国西北大学 Mirkin小组 [6 ]发明的 Dip- pen纳米刻蚀技术 (简称 DPN技术 )更在可控组装方面显示出巨大优越性 .这项技术是在一定驱动力作用下 ,使吸附在原子力显微镜 ( AFM)针尖上的分子“墨水”逐渐转移到基底表面上 ,实现纳米模板的可控构建 .与传统技术相比 ,DPN技术可在纳米尺…