双DC-DC变换器在爆闪式警示信号灯上的应用

本文探讨利用双DC-DC变换器去解决单级DC-DC变换器在宽电压范围工作时开关效率降低,开关器件不能正常工作,甚至损坏的问题。在现有信号灯的基础上,设计出一种寿命长、适应宽电压范围、功能齐全,便于生产、管理、使用、维修的爆闪式警示信号灯。     

浅谈香蕉曲线在投标中的应用

本文引入项目进度管理中的香蕉曲线理论对投标进度进行管理,针对投标的具体情况细化并绘制出了有关总体标书编制进度、商务信息编制、施工组织设计、报价汇总、投标内部评审的香蕉曲线,可以浅显直观地进行投标进度控制,同时通过内部评审对项目进行超前控制,保证了投标任务的顺利完成。     

掺杂两种荧光染料的有机红光电致发光器件

制作了掺杂rubrene和4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9,enyl)-4H-pyran(DCJTB)两种荧光染料的红光有机电致发光器件。N,N’-diphenyl-N,N’-bis(1-naphthyl)-(1,1’-biphenyl)-4,4’-diamine(NPB)和掺杂的Tri-(8-hydroxyquinoline)aluminum(Alq3)分别作为空穴和电子传输层。我们发现掺rubrene和DCJTB的器件性能与只掺DCJTB的器件性能相比有所提高。器件性能的改善是因为掺入的rubrene能够促进从Alq3到DCJTB的能量转移。根据荧光衰减曲线,计算出从Alq3到DCJTB、从Alq3到rubrene以及从rubrene到DCJTB的能量转移速率分别为1.04×109,3.89×109,2.79×109s-1。可以看出能量通过rubrene从Alq3到DCJTB的转移速率是能量直接从Alq3到DCJTB的2.7倍。     

旋光性与电光效应交互作用及其对旋光晶体电光Q开关的影响

研究了晶体的旋光性与电光效应的交互作用、以及此交互作用对 旋光晶体电光Q开关的影响. 关键词： 旋光性 电光效应 电光Q开关 3Ga₅SiO₁₄晶体')" href="#">La₃Ga₅SiO₁₄晶体     

利用爆磁压缩发生器产生高功率脉冲高电压

 爆磁压缩发生器产生脉冲高电压技术可以用于产生高功率微波及强电磁脉冲的实验研究。给出了利用螺旋型爆磁压缩发生器（HEMG）驱动电爆炸丝功率调节系统产生高功率脉冲高电压的实验方法和主要的结果。在利用HEMG驱动电爆炸丝断路开关（EEOS）产生脉冲高电压实验中，获得了最高电压700~800kV,功率大于20GW的脉冲输出。     

带有给定凸切线多边形的保形五次样条逼近

本讨论带有给定切线多边形的保形逼近问题．给出了一条与给定切线多边形相切的保形五次参数祥条曲线。     

在几何和参数上表示同一条曲线的两条有理NURBS曲线的权与控制顶点之间的关系

The paper discusses the relationship between weights and control vertices of two rational NURBS curves of degree two or three with all weights larger than zero when they represent the same curve parametrically and geometrically, and gives sufficient and necessary conditions for coincidence of two rational NURBS curves in non-degeneracy case.     

增长曲线模型参数估计的加权相对效率

对增长曲线模型中参数估计的相对效率，本文提出了一种新的定义－加权相对效率，并研究了它的性质，以及在文献「４」中的两种相对效率的关系。     

双纽线｜W^2＋c｜=1的弧长

设ｓ（ｃ）为双纽线｜Ｗ＾２＋Ｃ｜＝１的弧长，ｃ∈「０，＋∞），该文讨论了ｓ（ｃ）的性质，并在ｎ＝２的情况下解决了Ｅｒｄｏｓ，Ｈｅｒｚｏｇｔ Ｐｉｒａｎｉａｎ提出的一个猜测。     

THE RELATIONSHIP BETWEEN PROJECTIVE GEOMETRIC AND RATIONAL QUADRATIC B-SPLINE CURVES

For two rational quadratic B-spline curves with same control vertexes, the cross ratio of four eollinear points are represented; which are any one of the vertexes, and the two points that the ray initialing from the vertex intersects with the corresponding segments of the twocurves, and the point the ray intersecting with the connecting line between the two neighboring vertexes. Different from rational quadratic Beeier curves, the value is generally related with the loeation of the ray, and the necessary and sufficient condition o5 the ratio being independent of the ray‘s loeation is showed. Alsn another cross ratio o5 the following four collinear points are suggested, i.e. one vertex, the points that the ray from the initlal vertex intersects respectivdy with the curve segmentt the line connecting the segments end points, and the line connecting the two neighboring vertexes. This cross ratio is concerned only whh the ray‘s location, butnot with the weights of the curve. Furthermore, the cross ratio is projective invariant under the projective transformation between the two segments.