离子色谱法测定醇胺脱硫溶液中热稳定盐

为了控制热稳定盐(HSS)对天然气净化装置造成的危害,建立了一种同时检测醇胺脱硫溶液中的乙酸根离子、甲酸根离子、氯离子、硫酸根离子、草酸根离子、硫代硫酸根离子和硫氰酸根离子的离子色谱方法。该方法利用膜过滤、反相固相萃取和稀释3个步骤对工业样品进行前处理,采用氢氧化钾梯度淋洗和电导检测的方式,实现了7种离子的分离与检测。方法的线性范围为0.01～0.5 mmol/L,检出限(以信噪比(S/N)为3计)小于0.1 mg/L,回收率为80.0%～100.3%。在5个不同添加浓度下分别测定了上述7个离子,色谱峰面积的重复性良好(相对标准偏差(RSD, n=10)为0.94%～3.99%。通过3个实验室比对试验,表明该方法再现性良好,色谱峰面积的RSD小于5%。应用该方法成功地检测了8家天然气净化厂、3家石油炼厂和1家煤制油工厂的脱硫溶液样品中的HSS,并连续监测某天然气净化装置15 d。该方法具有良好的可靠性和实用性。     

Novel Oxygen Storage Components Promoted Palladium Catalysts for Emission Control in Natural Gas Powered Engines

A three-way catalyst comprised novel oxygen storage components for emission control in natural gas powered engines was prepared. The addition of novel oxygen storage components to the Pd/γ-Al2O3 catalysts resulted in improved activities of the fresh and aged catalyst by lowering the light-off temperature for methane in natural gas engines exhaust.     

Kinetic models of natural gas combustion in an internal combustion engine

In this study, combustion of methane was simulated using four kinetic models of methane in CHEMKIN 4.1.1 for 0-D closed internal combustion (IC) engine reactor. Two detailed (GRIMECH3.0 & UBC MECH2.0) and two reduced (One step & Four steps) models were examined for various IC engine designs. The detailed models (GRIMECH3.0, & UBC MECH2.0) and 4-step models successfully predicted the combustion while global model was unable to predict any combustion reaction. This study illustrated that the detailed model sh...     

Zr基载体负载Pd催化剂用于贫燃天然气汽车尾气净化

 采用共沉淀法制备了 ZrO2, Y0.1Zr0.9Ox, Ce0.1Zr0.9Ox 和 Al0.1Zr0.9Ox 系列 Zr 基载体, 并用 N2 吸附-脱附和 X 射线衍射对其进行了表征. 再以此为载体, 采用浸渍法制备了整体式负载 Pd 催化剂, 催化剂涂层的涂覆量为 180 g/L 左右, Pd 含量为 1.25%. 测定了催化剂上 Pd 的分散度. 在模拟的贫燃天然气汽车尾气中考察了催化剂的活性, 并在尾气中有或无 SO2 存在的条件下比较了催化剂活性的差异. 结果表明, Y3+, Ce4+ 或 Al3+ 改性载体负载的 Pd 催化剂的耐硫性能明显改善; 无论尾气中是否存在 SO2, 以 Y3+ 或 Al3+ 改性载体负载的 Pd 催化剂的活性均明显高于 ZrO2 负载体的 Pd 催化剂.     

内置多孔介质卷式反应器富燃制氢实验研究

设计了一个新型内置多孔介质卷式制氢反应器,进行了天然气/空气预混气在当量比1.25~2.50,总流量60 L/min~120 L/min条件下的富燃实验,研究其自热重整制氢的燃烧特性。结果表明,富燃情况下可实现自维持燃烧,自稳定响应时间较快;反应器Swiss-roll结构的有效预热与中心多孔介质的蓄热,可提高反应温度至1 600 K以上,实现超绝热富燃制氢;固定流量条件下,甲烷的转化效率与能量利用率随着当量比的变化而改变。实验中,氢气生成率与能量利用率分别为30%~57%、50%~84%。流量为120 L/min,当量比为2.0时,尾气中H2浓度达22%,氢气生成率为57%,能量利用率为68%。     

A novel correlation for estimation of hydrate forming condition of natural gases

An inherent problem with natural gas production or transmission is the formation of gas hydrates, which can lead to safety hazards to production/ transportation systems and to substantial economic risks. Therefore, an understanding of conditions where hydrates form is necessary to overcome hydrate related issues. Over the years, several models requiring more complicated and longer computations have been proposed for the prediction of hydrate formation conditions of natural gases. For these reasons, it is essential to develop a reliable and simple-to-use method for oil and gas practitioners. The purpose of this study is to formulate a novel empirical correlation for rapid estimation of hydrate formation condition of sweet natural gases. The developed correlation holds for wide range of temperatures (265–298 K), pressures (1200 to 40000 kPa) and molecular weights (16−29). New proposed correlation shows consistently accurate results across proposed pressure, temperature and molecular weight ranges. This consistency could not be matched by any of the widely accepted existing correlations within the investigated range. For all conditions, new correlation showed average absolute deviation to be less than 0.2% and provided much better results than the widely accepted existing correlations.     

天然气的组成与应用

由于我国天然气资源的大量发现以及原油可开采量的减少,利用天然气的技术和规模都获得快速发展,天然气的研究与开发越来越受到人们的关注。本文介绍了天然气的组成与最新的应用进展。     

天然气吸附剂的开发及其储气性能的研究——Ⅰ-吸附剂制备与体积法评定吸附剂的储气性能

报道了天然气吸附剂的基本制备技术,并采用体积法评定了吸附剂的储气性能。结果表明,采用作者开发的吸附剂制备工艺可获得性能优良的天然气吸附剂。以木质素为原料制备的粉状吸附剂,其比表面积可达２９１２ｍ２／ｇ,微孔体积可达１－４８ｃｍ３／ｇ,平均孔径为１－４８ｎｍ ,堆密度为０－３０ｇ／ｃｍ３ 。在６－０ＭＰａ、２５ ℃下,天然气的吸附储存量可达到１４０Ｖ／Ｖ。天然气吸附剂的储气性能与其比表面、微孔数量、填充密度等参数有重要关系     

天然气气相色谱仪检定装置的建立

为了保证天然气工业用气相色谱仪分析结果准确可靠和量值溯源有效,依据JJG 1055—2009《在线气相色谱仪》、JJF1033—2016《计量标准考核规范》等规程规范要求,配置建标所需计量标准器,研究开展了重复性试验、不确定度评定、检定结果的验证等工作,建立了天然气气相色谱仪检定装置,通过了国家市场监督管理总局的现场考...     

天然气能量计量分析系统性能评价方法及软件

天然气能量计量以天然气单位发热量和体积量（或质量）相乘得到的能量值作为计量单位,是科学、公平、合理的计量方式。开展天然气分析系统现场性能评价,掌握仪器的运行状况,是实施能量计量的前提。为提高计量场站设备评价效率及数字化管理水平,根据GB/T 28766—2018《天然气分析系统性能评价》规定的气相色谱仪性能评价的方法,同时参考JJF 1059.2—2012及ISO 10723:2012,编制天然气性能评价软件,并投入实际应用,结果显示,两个计量场站的体积计量不确定度超出国家标准要求,一台气相色谱仪的现行函数检测组成计算高位体积发热量与真实值的偏差较大。通过现场应用发现,使用评价软件可以节省评价时间,提高评价结果的准确性,保证评价数据的完整性,为能量计量的实施提供数据保障。