Fischer-Tropsch synthesis by nano-structured iron catalyst

Effects of nanoscale iron oxide particles on textural structure, reduction, carburization and catalytic behavior of precipitated iron catalyst in Fischer-Tropsch synthesis (FTS) are investigated. Nanostructured iron catalysts were prepared by microemulsion method in two series. Firstly, Fe2O3, CuO and La2O3 nanoparticles were prepared separately and were mixed to attain Fe/Cu/La nanostructured catalyst (sep-nano catalyst); Secondly nanostructured catalyst was prepared by co-precipitation in a water-in-oil microemulsion method (mix-nano catalyst). Also, conventional iron catalyst was prepared with common co-precipitation method. Structural characterizations of the catalysts were performed by TEM, XRD, H2 and CO-TPR tests. Particle size of iron oxides for sep-nano and mix-nano catalysts, which were determined by XRD pattern (Scherrer equation) and TEM images was about 20 and 21.6 nm, respectively. Catalyst evaluation was conducted in a fixed-bed stainless steel reactor and compared with conventional iron catalyst. The results revealed that FTS reaction increased while WGS reaction and olefin/paraffin ratio decreased in nanostructured iron catalysts.     

Comparative study of kinetic modeling for the oxidative coupling of methane by genetic and marquardt algorithms

Overall kinetic studies on the oxidative coupling of methane, OCM, have been conducted in a tubular fixed bed reactor, using perovskite titanate as the reaction catalyst. The appropriate operating conditions were found to be: temperature 750-775 ℃, total feed flow rate of 160 ml/min, CH4/O2 ratio of 2 and GHSV of 100 min-1. Under these conditions, C2 yield of 28% was achieved. Correlations of the kinetic data have been performed with lumped rate equations for C2 and COx formation as functions of temperature, O2 and CH4 partial pressures. Six models have been selected among the common lumped kinetic models. The selected models have been regressed with the experimental data which were obtained from the Catatest system by genetic algorithm in order to obtain optimized parameters. The kinetic coefficients in the overall reactions were optimized by different numerical optimization methods such as: the Levenberg-Marquardt and genetic algorithms and the results were compared with one another. It has been found that the Santamaria model is in good agreement with the experimental data. The Arrhenius parameters of this model have been obtained by linear regression. It should be noted that the Marquardt algorithm is sensitive to the first guesses and there is possibility to trap in the relative minimum.     

Zr（IV）／PVA功能膜的膜催化酯化反应研究

在催化与渗透汽化分离技术相偶合的渗透汽化型膜反应器中，研究了羧酸酯的液相合成反应。实验中制备了两类具有强酸催化活性的Ｚｒ（Ⅳ）／ＰＶＡ（聚乙烯醇）功能膜，采用管式膜方式，以乙酸正丁酯的合成反应为探针，对这类新型的催化反应技术在催化活性、分离性能以及分离对反应转化的影响等方面进行了探索性研究。从得到的结果看，膜催化酯化反应过程的反应条件和缓，转化率可达到９８％，反应的选择性为１００％。     

甲烷直接氧化制甲醇Ⅲ．反应气吹扫催化膜反应器（RSCMR）

用溶胶－凝胶法制备了“ＳｉＯ＿２／陶瓷”非对称无机膜，并用该膜制备了反应气吹扫催化膜反应器（ＲＳＣＭＲ）装置。在ＲＳＣＭＲ上考察了甲烷一步催化氧化制甲醇反应。结果表明，在研究的范围内，增加氧气或甲烷的浓度和吹扫气的流速（即总的反应气流量）有利于提高甲醇的收率；甲醇在反应条件下的热不稳定性是影响目标反应选择性的重要原因。ＲＳＣＭＲ较膜反应器（ＣＭＲ）系统能更有效地抑制甲醇的热分解，因而可得到较ＣＭＲ更高的甲醇收率。当反应温度为７００℃时，甲醇的收率在ＣＭＲ中为０．５ｇ／ｍ￣２ｈ，在ＲＳＣＭＲ中可达０．９ｇ／ｍ￣２ｈ。     

Zr（Ⅳ）／PVA功能膜的膜催化酯化反应研究

在催化与渗透汽化分离技术相偶合的渗透汽化型膜反应器中，研究了羧酸酯的液相合成反应．实验中制备了两类具有强酸催化活性的ｚｒ（Ⅳ）／ＰＶＡ（聚乙烯醇）功能膜，采用管式膜方式，以乙酸正丁酯的合成反应为探针，对这类新型的催化反应技术在催化活性、分离性能以及分离对反应转化的影响等方面进行了探索性研究。从得到的结果看，膜催化酯化反应过程的反应条件和缓，转化率可达到９８％，反应的选择性为１００％．     

甲烷直接氧化制甲醇Ⅱ．催化膜反应器（CMR）

采用溶胶－凝胶（Ｓｏｌ－Ｇｅｌ）法制备了微孔结构均匀的“ＳｉＯ＿２／陶瓷”膜和“Ｍｏ－Ｃｏ－·Ｏ／ＳｉＯ＿２／陶瓷”催化功能膜，并用ＸＲＤ、ＳＥＭ和孔径测定等技术进行了表征。在常压、５００～７００℃的条件下，在催化膜反应器（ＣＭＲ）中考察了甲烷氧化制甲醇的反应。在相似的反应条件下（转化率为１．０％），用ＣＭＲ（甲醇选择性１１．２％）可获得较固定床反应器（甲醇选择性４．５％）高得多的甲醇选择性。     

吸附相反应技术制备纳米TiO2/SiO2复合材料

以SiO₂表面形成的吸附层为反应器,在载体表面制备了纳米TiO₂粒子.溶剂置换实验直接给出了吸附层的存在以及吸附层作为纳米反应器的实验证据,TEM,XRD和电子能谱分析表明,载体表面形成一层比较均匀的纳米粒子.初步探讨了温度和反应物浓度对产物分布的影响,分析了各种现象产生的可能成因.     

Silicalite-1膜反应器中的丙烷芳构化

在丙烷芳构化反应中，氢气起着相当重要的作用；根据理论分析，消除氢气将会有利于芳构化反应的进行。在Ｓｉｌｉｃａｌｉｔｅ－１沸石分子筛膜反应器，丙烷芳构化反应中的芳烃选择性提高了１０％－２０％。针Ｓｉｌｉｃａｌｉｔｅ－ｌ膜反应器与氧化铝膜反应器中的反应结果相比较，表明膜反应器效果不仅取决于膜的渗透选择性，而且还取决于膜的渗透率。     

微反应器和微聚合反应器

微反应器是指容量仅为零点几μm^3或宽度为1μm左右的反应“容器”，反应在这个微小区域内有控地进行。以表面科学与微制造技术为核心，新型微反应器近年来发展很快。本文介绍五种微反应器，即反相胶束微反应器，聚合物微反应器，固体模板微反应器，微条纹反应器和微聚合反应器，以及它们在各高科技领域中的可能应用。