Experimental and Parametric Design of Petroleum Back-pressured Hydraulic Impactor

Percussive-rotary drilling technology was considered many years ago as one of the best approaches for hard rock drilling. It is a key for popularizing this technology on a large scale to design and make an impactor with excellent performance. This paper presents a suit of method to design the percussive parameters for the oil or gas field by introducing the working principle of back-pressured impactor, dividing the working periods of impactor into three phases and establishing the computer emulational model of percussive parameters. It draws a comparison between the results of model calculation and experiment on the basis of analyzing the experiment results of impactor. The conclude provides credible foundation for designing and further ameliorating the impactor.     

分层开采使用菱形金属网技术

在采煤工作面采用菱形金属网作为人工假顶，是全国煤炭系统重点推广的一项新技术。该技术具有明显的技术经济效益，推广前景广阔。     

界面作用对HDPE/POEg/CaCO_3三元复合材料韧性的影响

通过界面改性,制备了以CaCO3为核,马来酸酐接枝乙烯-辛烯共聚物弹性体(POEg)为壳的高密度聚乙烯(HDPEg)/弹性体(POE)/CaCO3的三元复合材料.由于“核-壳”结构的形成,弹性体和CaCO3表现出协同的增韧作用.同未经表面处理的CaCO3复合材料相比,在相同的CaCO3含量的情况下,表面处理的CaCO3由于与弹性体形成更强的界面粘结,使得三元复合材料的“脆-韧”转变发生在较低的弹性体含量.     

AM1法研究乙烯与环己－1，3－二烯热加成反应

用ＡＭ１方法（采用非限制的Ｈａｒｔｒｅｅ－ＦｏｃｋＵＨＦ计算）研究乙烯与环己－１，３－二烯的热Ｄｉｅｌｓ－Ａｌｄｅｒ反应。结果表明反应是放热的且存在两条竞争的路径；协同反应的活化能以及双自由反应速度控制步骤的活化能分别为１１２．６６７ｋＪ／ｍｏｌ和７８．４０６ｋＪ／ｍｏｌ。     

1,10-双(1′-苯基-3′-甲基-5′-氧代吡唑-4′-基)癸二酮-[1,10]与三苯基氧化膦对钐(Ⅲ)的协同萃取行为研究

研究了１，１０－双（１′－苯基－３′－甲基－５′－氧代吡唑－４－基）癸二酮－［１，１０］（ＢＰＭＰＤＤ，Ｈ２Ａ）与三苯基氧化膦（ＴＰＰＯ，Ｂ）的氯仿溶液从硝酸介质中对Ｓｍ（Ⅲ）的协同萃取行为，计算了体系的酸性协萃系数ＲＡ和协萃系数Ｒ，用斜率法测得协萃合物的组成为ＳｍＡ·ＨＡ·Ｂ，计算了协萃平衡常数，用萃取法制得了固态协萃合物，并对其组成、ＩＲ及ＴＧ－ＤＴＡ进行了研究     

柠檬酸铝/聚丙烯酰胺胶态分散凝胶反应动力学和机理的研究

采用粘度法研究了柠檬酸铝（AlCit)与部分水解取丙烯酰胺（HPAM）胶态分散凝胶体系的反应动力学。结果表明，胶态分散凝胶体系的交联反应是一级反应。并推导出胶态分散凝胶体系的反应动力学方程。     

SYNERGISTIC MODIFICATION OF EPDM AND CROSSLINKING AGENT IN IMMISCIBLE BLENDS OF POLYVINYL CHLORIDE WITH LOW DENSITY POLYETHYLENE

The synergism of ethylene-propylene-diene monomer copolymer （EPDM） and dicumyl peroxide （DCP, a crosslinking agent） in low density polyethylene （LDPE）/poly（vinyl chloride） （PVC） blends was investigated. When EDPM and DCP are added to the blends simultaneously, the tensile properties could be improved significantly, especially for the blends with LDPE matrix. For example, incorporation of 10/1 （mass ratio） EPDM/DCP improves the tensile strength of the LDPE/PVC （mass ratio 80/20） blend from 7.9 MPa to 8.5 MPa and the elongation at break from 25% to 503%. Results from selective extraction, phase-contrast microscopy and thermal analysis reveal that the improvement in the tensile properties of the blends with LDPE matrix is principally due to the formation of a fine crosslinking network of the LDPE and EPDM phase. The outstanding modification effect of EPDM is explained by its dual functions： molecular entanglement with LDPE and the enhanced efficiency of DCP in the blends.     

酞菁氧钛/卟啉氧钒复合体系光导性能的协同增强效应

在酞菁氧钛（TiOPc)／卟啉氧钒（VOTPP）复合光生材料中发现了光敏性的非线性增强现象，对复合体系的电子跃迁光谱和X射线衍射图的研究结果表明，在基态下两种材料之间没有明显相互作用，光致放电研究说明，该现象来自光激发状态下复合体系中的隙间态跃迁对光导的贡献，XPS测试结果表明酞菁氧钛与卟啉氧钒分子之间存在着定向的部分电荷转移，光致激发状态下的电荷转移是协同增强效应的起因，这种协同增强效应为利用弱的电子给体与弱的受体复合体系设计新型光导材料与器件提供了新方法。