专用软件的硬件化技术

一个专用数据传输、处理系统的全硬件化实现，目标在于掌握基于可编程逻辑器件的硬件设计关键技术，探索用全硬件替代通用CPU加控制电路、软件的软硬结合系统的方法。研究的重点和难点在于怎样实现专用系统软件的逻辑功能的硬件描述，怎样实现软件算法的硬件演化，在计算机中的模拟和验证以及在FPGA中的实现。该系统主要由UART、RAM、积分算法模块和线性多项式计算模块组成。系统参数经由UART传输到RAM中存储以备后续模块取用。采样数据则直接传输到积分算法模块中关系统参数进行运算。线性多项式计算模块对积分模块的运算结，与从RAM中取得的相果和相关系统参数进行多项式运算，得出最终结果输出。     

B/S三层体系结构模式

随着WEB技术的迅速发展和应用,如何利用WEB技术,建立集主机-终端方式和C/S方式优点为一体的新的应用模式是计算模式研究的一个新课题.论及了Internet/Intranet环境下,B/S三层体系结构模式的构成、工作原理,从多方面对比分析了B/S与C/S模式的优劣,认为B/S模式是当今应用软件的首选体系结构.     

High-Density Read-Only Memory Disc with Ag11In12Sb51Te26 Super-Resolution Mask Layer

A novel read-only memory (ROM) disc with an Ag11ln12Sb51Te26 super-resolution mask layer is proposed and investigated for the first time to our knowledge. The carrier-to-noise ratio of more than 40 dB could be obtained from small pits (380nm), which are below the readout resolution limit (400nm), in our dynamic setup with a wavelength of 632.8 nm and numerical aperture of 0.40. Dependences of carrier-to-noise ratio on readout power,readout velocity and film thickness are studied. The results show that the optimum film thickness is 20-50nm and the corresponding carrier-to-noise ratio is more than 40dB at readout power of 4mW and readout velocity of 2m/s in our experiment. The super-resolution readout mechanism for this ROM disc is also discussed.     

丹聂耳电池电动势产生的机理

 1836年,英国化学家丹聂耳(Daniell)发明了一种原理上最简单的化学电池,通常称之为丹聂耳电池。电动势是化学电池的一个重要的性能参数。而电动势等于单位正电荷由负极通过电池内部移到正极时电池内非静电力(化学力)所做的功。它取决于电极材料的化学性质,与电池的大小无关。因此,本文就从物理化学角度来探讨丹聂耳电池电动势产生的机理。丹聂耳电池的结构如图1所示。电池的两个电极锌板和铜板分别浸在ZnSO₄溶液和CuSO₄溶液中。     

从大规模的数据库中提取多层次的关联规则

主要探讨了从大规模的数据库中提取多层次的关联规则的方法，并结合一个实例介绍了提取层次关联规则的一种算法。     

A Novel Analytical Approach for Multi-Layer Diaphragm-Based Optical Microelectromechanical-System Pressure Sensors

An optical microelectromechanical-system （MEMS） pressure sensor based on multi-layer circular diaphragm is described and analysed by using the proposed novel analytical approach and the traditional transfer matrix method. The analytical expressions of the deflection of multi-layer diaphragm and absolute optical reflectance are derived respectively. The influence of residual stress on the deflection of diaphragm is also analysed. Simulation results given by the finite element method are consistent with the ones which are analysed by using the analytical approach. The analytical approach will be helpful to design and fabricate the optical MEMS pressure sensors with multi-layer diaphragm based on Fabry-Perot interferometry.     

相空间中相互垂直的相干态迭加态以及相应的双模纠缠态研究

相干态是最接近经典态的量子态，而广泛研究的相干迭加态——如奇偶相干态、Schleich的镜像迭加相干态等——则显示更多非经典效应。另外，双模及多模迭加态，特别是所谓的纠缠态，在量子信息处理如量子隐形传态和量子密码术中扮演重要角色。我们就相空间中相互垂直的相干态的迭加态进行讨论，研究其非经典特性，如光子数统计分布、正交分量压缩效应、Wigner分布函数的负性以及由此引入的非经典判别子。结果表明，这一类相干迭加态在满足某种条件下具有亚泊松光子统计分布和正交分量的压缩效应，并且参数变量在一定范围内这两种非经典效应同时存在；这些迭加态的Wigner分布中存在不同程度的负值区域．并与奇偶相干态做出了比较．计算相廊的Wigner函数积分判别子可以定最地分析其负性的深度。     

A NOVEL METHOD FOR FABRICATING COMPOSITE MOSAIC MEMBRANE WITH UNIQUE NF SELECTIVITY

A novel method of fabricating composite mosaic membranes was studied on the basis of interracial polymerization （IP） by coating a thin selective layer onto the surface of a micro-porous hollow-fiber membrane, in which, 2,5-diaminobenzene sulfonic acid was used as one monomer of the IP reaction, and a mixture of trimesoyl chloride （TMCI） and 4-（chloromethyl） benzoyl chloride as the other monomer. Through the IP reaction a thin selective layer with negatively charged groups could be first formed on the polyethersulfone （PES） support membrane. Then trimethylamine solution was introduced to modify the IP layer through a quaternization reaction. Thus the selective layer of this composite membrane contained both negatively charged and positively charged groups to perform the mosaic functionality. Characterization of the composite mosaic membranes was carried out through permeation experiments using different inorganic salts and dyes. The experimental results showed that the membranes could permeate both mono- and bi-valent inorganic salts, but reject larger organic molecules. Such a mosaic membrane is potentially useful for the separation of salts from water-soluble organics, especially in dye and textile industries.