SDE-GC-ECD分析水体中有机氯农药

运用单滴溶剂萃取-气相色谱-微池电子捕获检测器(SDE—GC—μECD)联用技术对水体中有机氯农药进行了分析，优化了影响单滴溶剂萃取的多种因素。该方法除了对P，P′-DDD的线性范围在0．4～4ng／mL之间外，其余的七种目标物(α-666，β-666，γ-666，δ-666，P，P′-DDE，0，P′-DDT，P，P′-DDT)线性范围均在0．04～4．0ng／mL之间，相关系数为0．9976～0．9999，回收率范围为83．3％～96．1％，相对标准偏差为2．1％～7．8％。与传统的液液萃取相比，单滴溶剂萃取不仅准确度、精密度相当，而且还具有省时、省溶剂的优点。     

中性载体阳离子电极膜电化学的计算机数字模拟

对中性载体阳离子电极膜3种可能的传输模式进行了数字模拟,研究了淌度、浓度、配合物稳定常数以及阴离子亲脂性对电极电位响应的影响。模拟结果对于廓清这类电极响应机理,解释有关实验现象及指导新电极设计提供了有用的信息。     

光活化农药

一、引言近年来,在农药领域出现了一类被称为光活化农药(Photoacitivated Pesticides)的新产品,这种农药在存放时并无毒性,但进入生物体后可被光激活而对摄入者起毒杀作用。     

配位聚合载体化催化剂ESR研究进展

本文概述了配位聚合载体化催化剂的ESR研究进展,介绍了载体研究、活性中心研究及计算机模拟技术研究方面的发展概况.     

有机溶剂对某些有机磷农药的NECC洗提影响的研究

以有机磷农药甲基对硫磷、对硫磷等为被试验物质，探讨了在十二烷基硫酸钠、硼砂电解液中加入甲醇、乙醇、异丙醇、乙腈等有机溶剂对某些有机磷农药的毛细管胶束电动色谱分离的影响，并从电解液的物理化学性质和毛细管色谱动力学两方面阐明了其影响机理。     

8种农药的大口径毛细管气相色谱分析

1　引　　言2 0世纪 80年代 ,毛细管气相色谱 (CGC)技术就广泛用于农药残留分析。现在毛细管气相色谱与固相萃取、固相微萃取、质谱等技术一起 ,被广泛地应用于农药的多残留分析。但作为农药原药和制剂的有效成分的常规分析 ,直至进入2 0世纪 90年代后才在农药国际标准分析方法 (CIPAC)手册中相继出现。近年来 ,随着大口径毛细管推广应用和一些重大技术的改进 ,毛细管气相色谱作为农药的常规分析方法 ,发展比较快。到目前为止 ,CIPAC已经建立了近 2 0个农药原药及其制剂的毛细管气相色谱标准分析方法。大口径毛细管气相色谱法具有分析…     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.