10瓦级双包层光纤激光器

考虑到所用大功率激光二极管的光谱特性，对光纤激光器的基本法布里-珀罗腔型稍加改变，研制出激光二极管抽运的10w级双包层光纤激光器，获得最高功率为11．8w、波长1100mm的单模激光输出。     

利用光热偏转技术实施光学薄膜弱吸收的多波长测量

介绍了光热表面形变光束偏转技术用于测量光学薄膜弱吸收的基本原理,简述多波长吸收测量装置的建立和测试过程,最后给出简单的测量实例.     

紫外可调谐辐射的波长自动跟踪研究

脉冲染料激光器的可见光波段辐射通过共线倍频和非共线混频实现紫外波段的连续可调谐输出.本文报道了一种闭环跟踪方法;在调谐起始波长处,将取样光束在垂直相位匹配方向分割成等光强的两部分,然后在波长调谐时比较和平衡这两部分光强.对该方法在理论上作了分析并在实验中得到成功的验证.获得的自动跟踪效率大于90%.     

A Two-Dimensional Photonic Crystal Slab Mirror with Silicon on Insulator for Wavelength 1.3μm

A concrete two-dimensional photonic crystal slab with triangular lattice used as a mirror for the light at wavelength 1.3μm with a silicon-on-insulator （SOI） substrate is designed by the three-dimensional plane wave expansion method. For TE-like modes, the bandgap in the Г-K direction is from 1087nm to 1559nm. The central wavelength in the bandgap is about 1.3μm, hence the incident light at wavelength 1.3μm will be strongly reflected. Experimentally, such a photonic crystal slab is fabricated on an SOI substrate by the combination of EBL and ICP etching. The measurement of its transmission characteristics shows the bandgap edge in a longer wavelength is about 1540 nm. The little discrepancy between the experimental data and the theoretical values is mainly due to the size discrepancy of the fabricated air holes.     

硫化锌掺钴对电子结构和光学性质的影响

根据密度泛函理论对钴掺硫化锌周围的品格进行了结构优化,计算得到了钴杂质周围的晶体结构、电子态密度分布和吸收光谱.计算结果表明,由于Co原子掺入ZnS晶格常数减小,导致晶格畸变;带隙变窄;吸收峰展宽至更长波长区域.     

KrVI离子能级和振子强度的理论计算

利用组态相互作用理论和参数外推法,计算了KrVI离子4s~24p—4s4p~2、4s~24p—4s~24d和4s4p~2—4p~3跃迁的能级、谱线波长和振子强度。与已有实验结果比较表明:波长的理论计算值与观测值在0.7A内很好符合,振子强度的理论计算值较大的跃迁均是实验中观测到的跃迁。     

A Powerful Simple Shooting Method for Designing Multi-Pumped Fibre Raman Amplifiers

A simple shooting method dedicated to the design of multipump discrete Raman fibre amplifiers (RFAs) ispro posed and discussed in detail. A novel scheme to provide a good initial guess for backward lightwaves is also proposed to improve the efficiency and robustness of the method. Using the proposed method, a discrete RFA with four backward pumps and 93 signal channels is simulated for the maximum number of interaction waves considered simultaneously in the RFA design reported previously; to our best knowledge. The numerical simulation results show that the proposed method is fast and robust. It can be used in the design of RFAs with various configurations including co-, counter- and bi-directJonal-pump schemes to provide an actual modelling.     

磁光玻璃费尔德常数的色散特性研究

本文对磁光玻璃的费尔德常数与工作波长的关系进行了理论分析和实验研究。首先由色散理论导出磁光玻璃的费尔德常数的波长依赖性，然后将ZF1、ZF6磁光玻璃加工成实验样品，测试了不同工作波长下的ZF1、ZF6磁光玻璃材料的费尔德常数，并将实验值和理论值进行了比较，分析误差产生的来源。在文章的最后，推导出费尔德常数的色散特性，讨论了磁光玻璃应用在磁光玻璃光纤电流传感器中存在的问题。     

单个波长到多个波长的变换实验

报道一种波长变换的新方法.采用此方法不需要任何泵浦光便能够直接将信号光变换成在特定谱宽内的任意多个任意波长的变换光,这对于将来的波分复用光网络提供了较大的方便.此波长变换的原理是利用色散位移光纤的非线性效应产生超连续光谱(SC)信号,由于这种SC信号携带有变换光信号,对这种连续谱进行滤波便能够得到所需要的任意频率的变换信号.此变换方式具有变换频带宽,偏振不敏感的优点。     

水准折光及双波长激光效应

本文从“同温度层不完全平行于地面,且在变化”的“任意分层”假设出发,导出了水准折光修正公式,并利用光的色散效应在10~(-6)的精度要求下,求得r=r_T=h_1/h_2=(n_(01)-1)/(n_(02)-1)=常数最后指出,研制双波长激光水准仪的必要性和可能性,并提出了研制此种仪器的技术参数.