应用LiNbO_3声表面波驱动的全光纤声光频移器

介绍一种工作在10.7MHz的全光纤声光频移器.它由在LiNbO_3基片上制作的叉指电极换能器产生的声表面波驱动.当驱动电功率1.5W时,频移光转换效率达35％.     

用正弦变频滤波器抑制孤子间的相互作用

提出用正统变频滤波器抑制孤子间的相互作用，并对上变频滤波器、下变频滤波器、交叉变频滤波器在抑制孤子相互作用方面的效应进行了数值研究。结果表明，正弦变频滤波器是最为有效的。     

受激喇曼散射在掺铒光纤放大器中的影响

本文在分析了均匀掺杂分布式光纤放大器（d－EDFA）的基础上，提出了沿传输方向掺杂浓度单调下降（单变），和降升结合（两变）的两种渐变型分布式光纤放大器，并用传输方程研究了透明传输和最佳掺杂浓度下，受激喇曼散射对均匀、单变和两变型三种d－EDFA的各种特性的影响．     

哈佛大学研制新型纳米光纤

据2003年12月3日英国《新科学家》报道:一种用于光学计算机和化学传感器的新型纳米光纤有望不久问世。光纤是利用有涂层的内芯传导光线的。这种新型光纤使用超细的二氧化硅做内芯,而用空气充当涂层。光纤内芯的材料表面必须做到十分光滑,与空气之间有一致的界面,因为粗糙的界面会使光波分散。为了确保表面光洁度合格,哈佛大学的埃里克·玛祖用一个炽热的蓝宝石椎体熔化二氧化硅,然后把它拉长。埃里克说,这种内芯的光滑程度已接近原子水平。他已制作出50纳米细的纤维。这种纤维的直径不到标准纤维的1/2000。光纤越细,沿着它表面通过的光波就…     

紫外／可见光纤光谱在线过程分析系统

项目采用全光谱分析、光纤传输和化学计量学算法等技术，发明了多层递减孔径直孔过滤技术、高温电捕焦油探头技术、入出气流共轴线射流技术、全固化原位抽取热湿法连续监测技术、     

Decomposition of the Two Lowest Lamb modes in a Bonded Plate

Based on the expression of the dispersion equation of Lame waves in an adhesive two-layered plate pressented in our proevious paper [Chin,Phys,Lett,18(2001)1483],the two lowest Lamb modes,the symmetric mode S0 and the antisymmetric mode A0 are successfully decomposed in the low-frequency regime,Relations between the rigidity of the bond and the velocity of the two Lamb modes are found,which lay a foundation for the estimation of the bond rigidity of the adhesive plate.The influence of the variations of the bond rigidity in terms of the stiffness constants KN and KT of the spring model on the velocity of the two Lamb modes in discussed and numerically evaluated.numerical results indicate that the deterioration of the bond rigidity causes the phase velocity decrease for Lamb modes of the two lowest order,thus having a possibility for the evaluation of the bonding state of the adhesive plate by using ultrasonic wave velocity measurement.     

何加铭教授被评为“宁波市杰出专家”

何加铭博士1998年浙江大学无线通信专业博士后出站,2 0 0 0年4月调入宁波大学,担任通信技术研究所所长、通信与信息系统无线通信方向学术带头人、宁波市通信芯片与射频技术重点实验室主任、宁波移动通信省级高新技术开发中心主任。何博士也是我校“百名教授、博士进企业”教师之一,到宁波大明通信科技发展有限公司担任总经理。他敬业尽职,在不耽误宁波大学信息学院学科建设和研究生讲课和指导的前提下,为宁波无线通信产业的发展做出了一定的成绩。他主持大明公司以来,已实现销售收入4 2 84万元,利税90 0多万元。在近三年时间里,何加铭博士先…     

技工院校智能楼宇管理专业实训中心建设方案探讨

智能楼宇管理是伴随着我国楼宇智能化而出现的朝阳职业，其专业建设还处于探索阶段，本文结合技工院校的教学特点，以浙江天煌的产品为例，对智能楼宇管理专业实训中心的建设进行了探讨，并提供了具体方案。     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang