等离子体噻吩聚合膜的研究及I+注入的掺杂效应

以噻吩为单体,在等离子体环境中聚合成致密的有机膜。利用Rutherford背散射(RB2S)和质子弹性反冲(ERD)、傅里叶红外谱(FTIR)测定了膜的成分和结构;从近红外-可见-紫外光的反射和透射谱,运用传递矩阵方法研究了膜的光学性质;此外,还探讨了24keV的I⁺离子束的注入对等离子体噻吩聚合膜的掺杂效应。结果表明,注入层内电荷载流子的输运机理可用Mott的可变自由程跳跃(VRH)理论给以解释。 关键词：     

Effects of Substrate Temperature on Helium Content and Microstructure of Nanocrystalline Titanium Films

Helium-charged nanocrystalline titanium films have been deposited by HeAr magnetron co-sputtering. The effects of substrate temperature on the helium content and microstructure of the nanocrystalline titanium films have been studied. The results indicate that helium atoms with a high concentration are evenly incorporated in the deposited titanium films. When the substrate temperature increases from 60℃ to 350℃ while the other deposition＇parameters are fixed, the helium content decreases gradually from 38.6 at.% to 9.2at.%, which proves that nanocrystalline Ti films have a great helium storage capacity. The 20 angle of the Bragg peak of （002） crystal planes of the He-charged Ti film shifts to a lower angle and that of （100） crystal plane is unchanged as compared with that of the pure Ti film, which indicates that the lattice parameter c increases and a keeps at the primitive value. The grain refining and helium damage result in the diffraction peak broadening.     

荧光X射线分析装置

本发明的课题在于提供一种进行氮置换的荧光X射线分析装置，容易更换试样室和照射室之间的隔壁膜，在分析时，试样室的空气不流入照射室。第1支架（21）按照其窗（21a）与试样室（3）和照射室（8）之间的壁部（4）的窗（如）重合的方式气密地安装于壁部（4）上，按照覆盖第1支架的窗（21a）的方式设置隔壁膜（9）。第2支架（23）按照其窗（23a）夹持隔壁膜（9），与第1支架的窗（21a）重合的方式设置。     

基于Internet/Intranet的大学物理实验系统

利用计算机技术、传感技术和校园网，将现代教育技术引入大学普通物理实验教学中，实现实验数据的自动采集，基于网络的实验预习和实验报告写作、递交、批改及管理等功能．     

斐索梯度折射率光纤透镜传感实验

采用LD泵浦的单纵模Nd：YVO4倍频激光器、梯度折射率光纤透镜等器件构成斐索梯度折射率光纤透镜传感实验仪．本文介绍了实验装置和实验原理，并给出了实验结果。     

蓝光相变光盘的多层膜结构设计

为了使光盘获得优良的记录／读出性能并能够长期稳定地使用，必须优化设计相变光盘的多层膜结构。采用自行设计的模拟分析相变光盘读出过程设计软件，从光学角度出发模拟计算了蓝光(405nm)相变光盘的膜层结构，研究了多层膜系的反射率和反射率对比度等光学参量与各层膜厚度和槽深的关系。研究得出的最佳多层膜结构为：下介电层／记录层／上介电层／反射层的厚度对于台记录为100nm／10nm／25nm，／60nm，而对于槽记录则为140nm／15nm／30nm，／60nm，槽深为50nm。模拟计算结果对于将来高密度蓝光相变光盘的制备具有一定的指导意义。     

全球九大新兴科技展望

合成生物学是指人们将“基因”连接成网络，让细胞来完成设计人员设想的各种任务。例如把网络同简单的细胞相结合，可提高生物传感性，帮助检查人员确定地雷或生物武器的位置。再如向网络加入人体细胞，可以制成用于器官移植的完整器官。     

Deposition of Diamond-Like carbon Films by High-Intensity Pulsed Ion Beam Ablation at Various Substrate Temperatures

Diamond-like carbon (DLC) films have been deposited on to Si substrates at substrate temperatures from 255℃ to 400O℃ by a high-intensity pulsed-ion-beam (HIPIB) ablation deposition technique. The formation of DLC is confirmed by Raman spectroscopy. According to an x-ray photoelectron spectroscopy analysis, the concentration of sp^3 carbon in the films is about 40% when the substrate temperature is below 300℃ C. With increasing substratetemperature from 25℃ to 400℃, the concentration of sp^3 carbon decreases from 43% to 8%. In other words,sp3 carbon is graphitized into sp^2 carbon when the substrate temperature is above 300℃. The results of xray diffraction and atomic force microscopy show that, with increasing the substrate temperature, the surface roughness and the friction coefficient increase, and the microhardness and the residual stress of the films decrease.