Effect of ionic interactions on the oxidation of Fe(II) with H2O2 in aqueous solutions

The oxidation of Fe(II) with H₂O₂ has been measured in NaCl and NaClO₄ solutions as a function of pH, temperature T (K) and ionic strength (M, mol-L^–1). The rate constants, k (M^–1-sec^–1), d[Fe(II)]/DT=-k[Fe(II)][₂O₂]at pH=6.5 have been fitted to equations of the formlog k = log k₀+ AI ^1/2+BI+CI ^1/2/T Where log k₀=15.53-3425/T in water; A=–2.3, –1.35; B=0.334, 0.180; and C=391, 235, respectively, for NaCl (=0.09) and NaClO₄ ( =0.08). Measurements made in NaCl solutions with added anions yield rates in the order B(OH) ₄ ^– >HCO ₃ ^– >ClO ₄ ^– >Cl^–>NO ₃ ^– >SO ₄ ^2– and are attributed to the relative strength of the interactions of Fe²⁺ or FeOH⁺ with these anions. The FeB(OH) ₄ ⁺ species is more reactive while the FeCO ₃ ⁰ , FeCl⁺, FeNO ₃ ⁺ and FeSO ₄ ⁰ species are less reactive than the FeOH⁺ ion pair. The general trend is similar to our earlier studies of the oxidation of Fe(II) with O₂ except for B(OH) ₄ ^– . The effect of pH on the logk was found to be a quadratic function of the concentration of H⁺ or OH^– from pH=4 to 8. These results have been attributed to the different rate constants for Fe²⁺ (k₀) and FeOH⁺ (k₁) which are related to the measured k by, k=k_0Fe + k_1FeOH, where _i is the molar fraction of species i. The rates increase due to the greater reactivity of FeOH⁺ compared to Fe²⁺. k₀ is independent of composition and ionic strength but k₁ is a function of ionic strength and composition due to the interactions of FeOH⁺ with various anions.     

Tunable picosecond pulse generation from the passively mode-locked coumarin 6 dye laser

Using the saturable absorber 2-(p-Dimethylaminostyryl)-benzothiazolylethyl iodide, coumarin 6 has been passively mode-locked for the first time to give fully modulated trains of pulses of 4 ps duration and with peak powers of 3 MW tunable over the spectral range 526–547 nm.     

New environmentally friendly solvent free synthesis of dihydropyrimidinones catalysed by N-butyl-N,N-dimethyl-α-phenylethylammonium bromide

N-Butyl-N,N-dimethyl-α-phenylethylammonium bromide catalyzes efficiently the three component condensation reaction of an aromatic aldehyde, a β-keto ester and urea/thiourea under solvent free conditions at 100°C to afford the corresponding dihydropyrimidinone in high yield.     

Millettia ferruginea extract attenuates cisplatin-induced alterations in kidney functioning,DNA damage,oxidative stress,and renal tissue morphology

This study aimed to investigate the beneficial role of Millettia ferruginea extract (MF) in preventing cisplatin (Cisp) induced nephrotoxicity in rats. A total of 55 metabolites were identified using LC-MS analysis. The in vivo results indicated that MF pretreatment for 4 weeks (20 mg/kg b.w.) remarkably attenuated the altered renal biomarkers by decreasing the levels of plasma creatinine, urea, and uric acid when compared to the Cisp-group. The nephroprotective capacity of MF was further strengthened by histopathological observations, where Cisp + MF treated rats showed lower number of inflammatory cells and tubular degenerative changes than the Cisp-group. The harmful effects of cisplatin on renal oxidative stress indicators (MDA, SOD, CAT, and GPx), were restored by the treatment of MF. In addition, the reduction of inflammatory markers (IL-6 and TNF-α), associated with alleviating DNA fragmentation, highlighted the preventive effect of MF in kidney tissue. Additionally, MF components presented lower binding energies when docked into the active site of TNF-α and IL-6. The present findings concluded that M. ferruginea extract exhibited nephroprotective potential, which may be attributed to its antioxidant and anti-inflammatory properties. Further work is recommended to confirm the current results, explore the involved mechanism of action, and determine the therapeutic doses and time.     

Polymer blends based on the β-modification of polypropylene

iPP/sPP, iPP/rPP, iPP/PVDF and iPP/PA-6 blends, and their β-nucleated forms were prepared in the present study. The components of iPP/sPP and iPP/rPP blends are compatible in the molten state. The phase structure of the melt of iPP/PVDF and iPP/PA-6 blends is heterogeneous. The melting and crystallisation characteristics as well as the structure and polymorphic composition of these blends were studied by polarised light microscopy (PLM) and differential scanning calorimetry (DSC). When semicrystalline polymers are added to iPP, the most important factor of the formation a blend with β-crystalline phase is the α-nucleation effect of the second polymer. In the case of polymers with an α-nucleating effect, the temperature range of their crystallisation should be lower than that of β-iPP. β-nucleated iPP/PVDF and iPP/PA-6 blends are extreme examples showing that completely β-iPP matrix can not form even in the presence of a highly effective β-nucleant, because of the strong α-nucleating ability and higher crystallisation temperature range of PVDF and PA-6. We found that the β-crystallisation tendency of random propylene copolymers can be enhanced by adding an iPP homopolymer.     

Reaction of a 5α-bromo-6β,19-epoxysteroid with BF3·Et2O/Ac2O: An evidence of a cyclic bromonium cation

Treatment of 3β-acetoxy-5-bromo-6β,19-epoxy-5α-androstan-17-one with Ac₂O and BF₃·OEt₂, produced the cleavage of the epoxy moiety and migration of the bromine atom to afford 3β,19-diacetoxy-6α-bromo-5-hydroxy-5β-androst-17-one in high yield.     

Simultaneous determination of Fe(II) and Fe(III) by kinetic spectrophotometric H-point standard addition method

The H-point standard addition method (HPSAM) for simultaneous determination of Fe(II) and Fe(III) is described. The method is based on the difference in the rate of complex formation of iron in two different oxidation states with Gallic acid (GA) at pH 5. Fe(II) and Fe(III) can be determined in the range of 0.02–4.50 μg ml⁻¹ and 0.05–5.00 μg ml⁻¹, respectively, with satisfactory accuracy and precision in the presence of other metal ions, which rapidly form complexes with GA under working conditions. The proposed method was successfully applied for simultaneous determination of Fe(II) and Fe(III) in several environmental and synthetic samples with different concentration ratios of Fe(II) and Fe(III).     

α-Tetralone glycosides from the green walnut husks of Juglans mandshurica Maxim. and their cytotoxic activities

Abstract

Five new α-tetralone glycosides, juglanbiosides A-E (1–5), together with an α-tetralone derivative (15) and nine known 1,4-naphthoquinones (6–14) were isolated from the 95% EtOH extract of green walnut husks of Juglans mandshurica Maxim. Their structures were elucidated by comprehensive spectroscopic methods (¹H, ¹³C NMR, DEPT, HSQC, HMBC, CD, HR-ESI-MS). In vitro cytotoxicities of all the isolated compounds were evaluated against BGC-823, HCT-15 and K562 cancer cell lines.

     

Combined investigation of experimental characterization and theoretic calculation on the structure of dextran-Fe3O4 clusters

Dextran-Fe₃O₄ hybrid clusters were fabricated by coprecipitating ferric and ferrous ions in the presence of dextran, and after characterization of these clusters combined with calculation based on classical nucleation theory, a structure model of these hybrid clusters was proposed. The hybrid cluster was believed including small Fe₃O₄ nanoparticles and dextran which acted as both nucleating agent and stabilizer, so that exist in both the inside of magnetite nanoparticles and the periphery of the hybrid clusters. Besides, the effects of W_CD (weight_{iron cation}:weight_dextran) and molecular weight of dextran on the size, morphology and magnetic property of clusters were also investigated in this paper. It was found that the variation of W_CD and molecular weight of dextran have great effect on the size of the hybrid clusters, but have almost no effect on the size of the Fe₃O₄ nanoparticles. The characterization of magnetic property demonstrated that the Fe₃O₄ nanoparticles are of a single domain and the saturation magnetization was affected by the size of dextran-Fe₃O₄ hybrid clusters.     

Synthesis of 2-(α-Hydroxyalkyl)-2-Oxazoline under Microwave Irradiation in Bluk

Four 2-(α-hydroxyalkyl)-2-oxazolines and a 2-(α-hydroxy-α,α-diphenyl)-2-benzooxazole were synthesized from β-amimoalcohols and α-hydroxy carboxylic acids under microwave irradiation in the absence of a solvent.