The Electrochemistry of Tetraphenyl Porphyrin Iron(III) Within Immobilized Droplets Supported on Platinum Electrodes

For the first time, the voltammetry of an ensemble of immobilized benzonitrile microdroplets containing 5,10,15,20‐tetraphenyl‐21H,23H‐porphine iron (III) chloride, TPPFeCl immobilized at platinum electrodes immersed in various aqueous electrolytes has been explored. The reduction of TPPFeCl was observed with the voltammetric response seen to be highly dependent on the nature of ions in the surrounding aqueous phase. Unlike voltammetry in purely homogeneous solution the nature of the aqueous electrolyte can influence the voltammetry in the droplet phase. The electrochemical reduction of TPPFeCl contained within tetrabutylammonium chloride (TBACl) supported benzonitrile (PhCN) microdroplets immersed into an aqueous solution of TBACl was first studied. During TPPFeCl reduction the resulting [TPPFeCl]^? species is stabilized due to the excess of chloride anions inside the oil droplet. Voltammograms of homogeneous solutions of PhCN supported with TBACl show similar chemically reversible process which is also attributed to the stable [TPPFeCl]^? species. This anion stabilization was not observed when the oil droplets were supported with tetrabutylammonium perchlorate (TBAP) or when the PhCN solution bathing the microdroplet ensemble was supported with TBAP resulting in a chemically irreversible process. The voltammetry of unsupported droplets immobilized on a platinum electrode immersed in different aqueous electrolytes was also explored and the fate of the [TPPFeCl]^? species formed considered during the reduction sweep. Similarities and difference to voltammetry in purely homogeneous media are noted and the use of droplet voltammetry provides complimentary information.     

Investigation of surface structure and composition of in situ annealed Fe–Mn binary alloy samples using RHEED and electron spectroscopy

The formation of oxides at the surface of Fe–1.5%Mn and Fe–0.6%Mn binary alloys was investigated as a function of the conditions of the heat treatments. Both the influence of temperature and the atmosphere under which the experiments were performed were studied. The range of annealing temperatures was adjusted to 800°C. The atmosphere consisted of a mixture of N₂–5%H₂ and traces of water vapour, with different fixed dew points ranging from −10°C to −30°C. The state of the annealed surfaces was determined using in situ analytical devices attached to the annealing reactor in order to avoid surface contamination or the formation of native oxides after the experiments due to contact with air. The structure and composition of the surfaces were determined by reflection high-energy electron diffraction (RHEED) and electron spectroscopy (XPS, AES). Copyright © 2002 John Wiley & Sons, Ltd.     

由硅醚经脱保护-氧化-Wittig反应一锅法合成,-不饱和酯

在1摩尔醋酸和稳定的Wittig试剂存在下, 活性MnO₂作为氧化剂时, 硅醚发生脱保护-氧化-Wittig反应. 考查了各种硅醚, 诸如苄基硅醚、炔丙基硅醚、烯丙基硅醚和烷基硅醚等作底物在反应性能方面的差异. 该反应使硅醚直接形成碳碳双键而得到α,β-不饱和酯. 产物的结构经红外光谱、核磁共振谱表征.     

NMR parameters of the tetrahedrane [Fe2(CO)6(μ-SNH)], studied by experiment and DFT

The intramolecular dynamic behavior of the tetrahedrane-type cluster [Fe₂(CO)₆(μ-SNH)] 1 was studied by ¹³C NMR spectroscopy. The ⁵⁷Fe chemical shift of 1 and the coupling constants ¹ J(⁵⁷Fe,¹³C) were measured. These NMR parameters, and also ¹ J(⁵⁷Fe,¹⁵N), were found to be in good agreement with data calculated by using density functional theory (DFT) methods (B3LYP), based on the geometry calculated at the 6-311+G(d,p) level of theory. The isolobal replacement of the Fe(CO)₃ with BH fragments leads to the tetrahedranes [Fe(CO)₃(BH)(μ-SNH)] 2 and [(HB)₂(μ-SNH)] 3. Both were identified by calculations as minima on the respective potential energy surface (PES). However, the tetrahedrane-type structure of 3 is much higher in energy when compared with the planar cyclic isomers 3a and 3b.     

Diastereoselective addition of diethyl difluoromethylphosphonate to enantiopure sulfinimines: synthesis of α,α-difluoro-β-aminophosphonates, phosphonic acids, and phosphonamidic acids

Addition of diethyl lithiodifluoromethylphosphonate to enantiomerically pure aromatic, heteroaromatic, and aliphatic aldehyde-derived sulfinimines afforded N-sulfinyl α,α-difluoro-β-aminophosphonates with generally good enantioselectivity and in high yield. The reaction with acetophenone-derived sulfinimine resulted in the formation of the addition product with high diastereoselectivity and in only moderate yield. A two-step deprotection involving treatment of diastereomerically pure N-sulfinyl α,α-difluoro-β-aminophosphonates with trifluoroacetic acid in EtOH followed by refluxing with 10 N HCl provided enantiopure α,α-difluoro-β-aminophosphonates and α,α-difluoro-β-aminophosphonic acids. The N-Cbz derivative of (R)-2-amino-1,1-difluoro-2-phenylethylphosphonate was a convenient starting point for the preparation of corresponding difluorophosphonate monoester, difluorophosphonic acid, and difluorophosphonamidic acid. At 21 °C difluorophosphonamidic acid was stable in aqueous solution at pH above 5.     

The ternary system H2O–Fe(NO3)3–Co(NO3)2 isotherms 0 and 15 °C

The solid–liquid equilibria of the ternary system H₂O–Fe(NO₃)₃–Co(NO₃)₂ were studied by using a synthetic method based on conductivity measurements.

Two isotherms were established at 0 and 15 °C, and the stable solid phases which appear are the iron nitrate nonahydrate (Fe(NO₃)₃·9H₂O), the iron nitrate hexahydrate (Fe(NO₃)₃·6H₂O), the cobalt nitrate hexahydrate (Co(NO₃)₂·6H₂O) and the cobalt nitrate trihydrate (Co(NO₃)₂·3H₂O).     

Fe(Cp)2PF6: An efficient catalyst for cyanosilylation of carbonyl compounds under solvent free condition

An efficient method for the addition of trimethylsilyl cyanide (TMSCN) to various aldehydes and ketones has been described using Fe(Cp)₂PF₆ (2.5 mol%) as a catalyst under solvent free condition. Excellent yields of trimethylsilylether of cyanohydrin up to (94%) was achieved within 10 min.     

N-Nosyl-α-amino acids in solution phase peptide synthesis

A highly efficient and practical synthesis of peptides in solution phase has been developed. The procedure is based on the use of p-nitrobenzenesulfonyl (nosyl) group for the protection of the amino function of α-amino acids. Every step of the procedure, protection of the amino function by the nosyl group, formation of the peptide bond, and removal of the sulfonamide group, is characterized by high yields and excellent purity of the final products. The described strategy allows the preparation of short peptide sequences keeping the chiral integrity of amino acid precursors. Compatibility of nosyl group with the side-chain protecting groups used in Fmoc-based strategy is demonstrated. The method here presented is an alternative strategy that could provide advantages for future peptide synthesis.     

不同光滑度立方体氧化铁对液晶电光性能的改善

向列相液晶被广泛应用于液晶显示中,但是由于杂质的存在,会导致液晶的驱动电压变大,增加能耗。 为了降低阈值电压和饱和电压,通常向液晶中添加纳米颗粒来提高电光性能。 本文利用水热法制备了表面粗糙和光滑的两种立方体Fe₂O₃纳米颗粒,其形貌均匀,尺寸约550 nm。 将二者分别掺杂到向列相液晶E7中,结果表明,粗糙立方体Fe₂O₃/E7复合体系具有比光滑立方体Fe₂O₃/E7复合体系和向列相液晶E7更优的电光性能,且在掺杂质量分数为0.4%时,其电光性能达到最优,阈值电压和饱和电压分别降低9.9%和11.6%,对比度增大80%,响应时间降低至6.0 ms。 这归因于粗糙立方体Fe₂O₃具有足够的表面积和表面所带电荷更多,所以会更易吸附体系中的杂质离子和减弱杂质离子的屏蔽作用,从而提高了电光性能。     

α-乙酰氧基-N-亚硝基吡咯烷的解离及其致癌代谢机理的理论研究

用ab initio方法, 在MP2/6-31G**水平下讨论了α-乙酰氧基-亚硝基吡咯烷(α-Acetoxy-NPYR)在各种条件下的解离反应机理, 并对形成终致癌物B, C, D的代谢机理进行研究. 发现在OH^－和H₂O作用下的解离都遵循羟基进攻羰基机理, OH^－作用下是一个经四面体中间体阴离子的无位垒过程, H₂O作用下有相对高的活化能(165.36 kJ/mol). H₃O^＋作用下是先形成阳离子产物的S_N1过程, 并没有发现遵循两种综合的解离情形. 同时, 羟基化产物异构化为终致癌物B, C, D是一个相对容易进行的过程.