PLC在双动压力机控制系统中的应用

PLC应用:ROL(027)循环左移指令、ROR(028)循环右移指令完成自动与手动控制,INC(038)BCD码加1指令完成单次控制,@ROR(028)微分循环右移指令完成循环控制,DIV(033)BCD码除法指令完成安全工作报警控制.     

基于MATLAB(SIMULINK)的电弧炉电极调节系统FUZZY-PD控制器的仿真

介绍了采用MATLAB V5.2提供的模糊逻辑工具箱来设计研究电孤纺电极调节系统中的模糊－－PD控制器，讨论了在SIMULINK环境下模糊－PD控制器的参数自调速原理、结构、建立模糊控制规则库和模糊推论方法，并给出仿真结果与结论。     

基于Apollo信号控制台的NQR炸药探测方法

介绍了一种基于Apollo信号控制台的核四极矩共振（NQR）炸药探测方法，描述了系统的结构组成、工作原理和实现方法，并给出了对RDX的测试试验结果. 试验表明该方法可实现对RDX信号的探测.     

Optimal design of a convergent-barrel cold spray nozzle by numerical method

A convergent-barrel (CB) cold spray nozzle was designed through numerical simulation. It was found that the main factors influencing significantly particle velocity and temperature include the length and diameter of the barrel section, the nature of the accelerating gas and its pressure and temperature, and the particle size. Particles can achieve a relatively low velocity but a high temperature under the same gas pressure using a CB nozzle compared to a convergent-divergent (CD) nozzle. The experiment results with Cu powder using the designed CB nozzle confirmed that particle deposition can be realized under a lower gas pressure with a CB nozzle.     

Mössbauer and X-ray diffraction characterization of Fe60Al40 coatings prepared by thermal spraying

Microstructured (atomized) and nanostructured (milled) Fe₆₀Al₄₀ powders together with their corresponding coatings synthesized by High Velocity Oxy-fuel (HVOF) or Atmospheric Plasma Spray (APS) thermal spraying techniques have been characterized by Mössbauer Spectroscopy (MS) and X-ray Diffraction (XRD). The evolution of the microstructure and the atomic ordering degree in the powders and coatings are discussed at the light of the various processing conditions. The operational correlation between the parameters of the duplex morphology of coatings and the processing parameters is discussed.     

Predictive control of periodic-review production inventory systems with deteriorating items

In this paper a predictive control strategy is applied to a periodic-review dynamic inventory system with deteriorating items. Given the current inventory level, we determine the optimal production rates to be implemented at the beginning of each of the following periods over the control horizon. The effectiveness of this approach is the use of future information of the inventory target level and the desired production rate, which are available, along the fixed horizon. The deterioration coefficient may be known or unknown and both cases are considered. In the case where it is unknown, the self-tuning predictive control is applied. The proposed control algorithms are illustrated by simulations.     

光束偏转法自动测试激光等离子体冲击波系统的研制

根据光束偏转原理，研制了激光等离子体冲击波自动测试系统的硬件和软件。该系统使用计算机与可编程序控制器作为上下位机，采取上下位机通讯的方式控制步进电机及二维移动架的移动，以改变探测光的相对位置，并利用单模光纤和光电倍增管将探测到的光偏转信号传入数字示波器进行存储，最后计算机将示波器中采集到的光偏转信号进行分析处理。使用该系统对激光等离子冲击波的衰减过程进行了实际测试，得到了较为理想的实验结果。     

可编程控制器调速器

本文以联合研制成功的水电站可编程控制调速器为对象，详细介绍其硬件与软件构成及工作原理。同时，对多种调节模式等方面也进行了一些探索。     

提高PLC教学效果之方法的探求

《可编程控制器》作为一门课程正逐渐被各大学所采纳,本文结合作者多年的教学经验总结了几种常用的教学方法,并加以分析比较。     

自动启闭窗帘控制器的设计

介绍了直流电源、555时基电路、电磁继电器和光敏电阻,论述了自动启闭窗帘控制器的电路设计。