因子分析-导数光谱法测定苯酚和间苯二酚混合物

本文测定了苯酚和间苯二酚混合体系的一阶导数光谱数据,用目标因子分析对这些导数数据进行处理,以探索因子分析在导数光谱中应用的可能性。在不加任何分离的情况下,成功地确定了苯酚和间苯二酚混合体系中的物种数、物种种类及含量。     

A NOVEL EOR POLYMER (Ⅱ)——INVESTIGATION ON IN-SITU GELATION OF SMRF SYSTEM IN BEREA CORE

In-situ gelation of aqueous sulfomethylated resorcinol formaldehyde (SMRF) system inBerea core has been investigated. Two sets of displacement experiments were conducted with thissystem (containing 5% NaCl, 0. 036% CaCl_2. 2H_2O). The brine permeabilities of the coreswere reduced significantly from about 600 to 0.1 md. The in-situ gelation in Berea core occurreda little bit earlier than gelation anticipated from bulk test in the experiments. The gel time waseasier to control at initial pH between 6 and 8. During injection of SMRF system, the apparentviscosity was less than 1 mPa·s at 41℃.     

Synthesis of Substituted Hydroxyspiro([1]benzopyran-2,4'(1'H)-pyrimidine)-2'(3'H)thiones and Hydroxyspiro-([1]benzopyran-2,4'(1'H)-pyrimidin)-2'(3'H)ones

We have developed a novel regioselective method for synthesis of substituted spiro([1]benzopyran-2,4'-(1'H)pyrimidine)-2'-(3'H)thiones and spiro([1]benzopyran-2,4'-(1'H)pyrimidin)-2'-(3'H)ones having one or two hydroxyl groups on the benzene ring.     

交替三线性分解算法与反相高效液相-二极管阵列检测方法相结合同时测定苯二酚的位置异构体

 利用交替三线性分解算法与反相高效液相 二极管阵列检测 (RP HPLC DAD)相结合 ,在洗脱时间为1 0 86min～ 1 399min(间隔 1 / 1 50min)、紫外吸收波长为 2 68nm～ 2 98nm(间隔 1nm)时对苯二酚位置异构体的重叠及光谱体系进行了分辨研究。分辨结果与实际结果一致。同时测定了水溶液中共存的邻苯二酚、间苯二酚和对苯二酚的含量 ,回收率分别为 (1 0 0 1± 1 0 ) % ,(99 4± 1 4) % ,(1 0 0 5± 1 7) %。研究结果表明 :该方法定量快速准确 ,实验操作步骤简单 ,解决了在干扰物存在条件下三者很难同时分辨的问题。     

Complexing tendencies of UO 22+ and Th4+ in their mixed ligand complexes with aminopolycarboxylates and resorcinol or its derivatives

Formation contants (log K _MAL ^MA ) of mixed ligand complexes MAL, where M = UO ₂ ²⁺ or Th⁴⁺, A = IMDA, NTA, HEDTA, EDTA, CDTA or DTPA, and L = resorcinol (res), 2-methyl resorcinol (2-Me-res), 5-methyl resorcinol (5-Me-res) or 4-chloro resorcinol (4-Cl-res), have been determined pH-metrically by the Irving-Rossotti approach at 25°C and at an ionic strength,I = 0.2(moldm⁻³KNO₃). The observed stability sequences are IMDA > NTA > HEDTA > EDTA > CDTA > DTPA, and 4-Cl-res > 5-Me-res > 2-Me-res > res with respect to primary and secondary ligands, respectively. Th⁴⁺ forms more stable mixed complexes than UO ₂ ²⁺ . The A ΔlogK values are negative due mainly to the charge repulsion involved in the complexation MA + L⇋MAL.     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.     

间苯二胺、间氨基酚与间苯二酚混合液的萃取分离

在不同的酸碱条件下,分别以正丁醇(BuOH)、醋酸正丁酯(BuAc)及甲基异丁基甲酮(MIBK)作为萃取剂,对间苯二胺、间氨基酚及间苯二酚的水溶液混合体系进行萃取分离研究.HPLC分析实验结果表明:随着混合水溶液中H+浓度的增加,分离出间苯二酚的效果增强;而随着混合水溶液中OH-浓度的增加,分离间苯二胺的效果将大大增强;作为萃取剂,醋酸正丁酯和甲基异丁基甲酮优于正丁醇,能对水溶液混合体系中的三组分进行完全有效的分离,其中以甲基异丁基甲酮萃取效果最好.实验得到的最佳分离条件是:萃取剂为甲基异丁基甲酮,混合溶液中n(H+)/n(-NH2)≥1.32∶1时,萃取相中仅有间苯二酚;混合溶液中n(OH-)/n(-OH)≥1.11∶1时,萃取相中仅有间苯二胺.     

Resorcinol‐based benzoxazine with low polymerization temperature

The industrial applications of benzoxazines are limited due to their high curing temperatures. This drawback can be overcome by more reactive precursor compared to conventional benzoxazines or by application of efficient initiators. We report the synthesis of a new resorcinol‐based benzoxazine and its cationic polymerization with thermolatent super acids, namely organic sulfonium hexafluoroantimonates. This combination of a reactive precursor and an efficient initiator results in a curing temperature below 100 °C (differential scanning calorimetry onset) which is up to now one of the lowest polymerization temperatures for benzoxazine systems. Furthermore, the thermal stability of the formed polybenzoxazine has not been influenced by the applied initiators. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1693–1699     

Determination of Uranium in Natural Waters by Solid Phase Spectrometry

Abstract

A microdetermination method (at the μg1^?1 level) for uranium has been developed, based on Solid-Phase Spectrophotometry (SPS). The uranium reacts with pyridylazo-resorcinol in the presence of fluoride to form a 1:1:1 red ternary complex, which is fixed on an anion-exchange resin. The resin absorbance is measured directly, and allows the determination of uranium in the range of 1–10μg1^?1, with an RSD of 4%. The method has been applied to the determination of U(VI) in natural waters from wells located near the deposits of industrial wastes from a uranium mineral plant in Andujar (Spain).     

Perchloric Acid-Catalyzed Synthesis of 9-Aryl Xanthenes-9H-3,6-diol and 1,3,6,8-Tetraol in Water

Efficient syntheses of xanthenes have been described using a catalytic amount of perchloric acid in water. The high temperature and lengthy reaction time normally required for formation of xanthenes derivatives are not necessary when using a catalytic amount of perchloric acid. The method is relatively inexpensive, easily available, nonvolatile, nonexplosive, and thermally robust to catalyze the reaction at 80 °C by simple heating with good to excellent yields. The advantages of the reaction involve simple reaction protocol, simple workup, and improved synthesis in the presence of perchloric acid as catalyst.