巷旁充填沿空留巷技术研究

本文通过转Ⅳ喷射机组成的风力充填系统输送矸石——水泥胶凝混合料的巷旁充填研究,介绍了该技术在沿空留巷中应用及效果,并对改进提出了建议。     

矿渣粉加固粉土的理论分析及路用性能研究

提出了矿渣粉加固粉土的相关理论。将矿渣粉在加固土中的作用归结为火山灰胶凝效应和微集料填充效应,而火山灰胶凝效应又可进一步归结为水化作用、激发作用和离子交换作用;认为微集料填充效应与矿渣粉细度极为相关;用框图归纳了矿渣粉加固土的两种作用效应。进行了矿渣粉、石灰粉加固土无侧限饱水抗压强度、水稳定性、冻稳定性、温度收缩和干燥收缩等路用性能试验,并进行比较。结果表明,矿渣粉加固土所测路用性能指标优于石灰粉加固土。为工程应用提供了试验依据。     

The Ends of Manifolds with Bounded Geometry, Linear Growth and Finite Filling Area

We prove that simply connected open manifolds of bounded geometry, linear growth and sublinear filling growth (e.g. finite filling area) are simply connected at infinity.     

A new VOF‐based numerical scheme for the simulation of fluid flow with free surface. Part II: application to the cavity filling and sloshing problems

Finite element analysis of fluid flow with moving free surface has been performed in 2‐D and 3‐D. The new VOF‐based numerical algorithm that has been proposed by the present authors (Int. J. Numer. Meth. Fluids, submitted) was applied to several 2‐D and 3‐D free surface flow problems. The proposed free surface tracking scheme is based on two numerical tools; the orientation vector to represent the free surface orientation in each cell and the baby‐cell to determine the fluid volume flux at each cell boundary. The proposed numerical algorithm has been applied to 2‐D and 3‐D cavity filling and sloshing problems in order to demonstrate the versatility and effectiveness of the scheme. The proposed numerical algorithm resolved successfully the free surfaces interacting with each other. The simulated results demonstrated applicability of the proposed numerical algorithm to the practical problems of large free surface motion. It has been also demonstrated that the proposed free surface tracking scheme can be easily implemented in any irregular non‐uniform grid systems and can be extended to 3‐D free surface flow problems without additional efforts. Copyright © 2003 John Wiley & Sons, Ltd.     

Effect of the pore surface modification of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes

We have investigated the effect of the surface state and surface treatment of the pores of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes. Shirasu porous glass (SPG) was used as the inorganic substrate, and methyl acrylate was used as the grafting monomer. The grafting rate increased as the density of silanol on the SPG substrate increased. This result suggests that radicals are generated mainly at the silanol groups on the pore surface by plasma irradiation. The SPG substrates were treated with silane coupling agents used to control the mass of organic material bonded to the pore surface. The thickness of the grafted layer became thinner as the mass of organic material bonded to the pore surface of SPG increased. This decrease in the thickness of the grafted layer could be explained by the decrease in the penetration depth of vacuum ultraviolet rays contained in plasma having a wavelength of less than 160 nm that generated radicals in the pores of the substrate. The thickness of the grafted layer inside the SPG substrates could be controlled through the control of the mass of organic material bonded to the pore surface of the SPG substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 846–856, 2006     

Solvent intercalation in cobalt dimethylglyoximato complexes: A miniature host-guest system

When crystallized from appropriate solvents, the complex aqua-bis(dimethylglyoximato)nitrocobalt (III) may incorporate solvent molecules, thus forming a variety of mixed crystals. In the resulting host-guest crystals, the space groupP2_l/m and the packing motif of the pure host compound are retained. Lattice constantsa andb remain essentially unaltered upon intercalation, whereasc and the monoclinic angle depend largely on the clathrated guest. Space filling and intermolecular contacts are discussed.Dedicated to Professor Peter Paetzold at the occasion of his 60th birthday. A preliminary account of this work has been given at the Spring Meeting of the British Crystallographic Association, Newcastle upon Tyne, 1994.     

Partial-filling affinity capillary electrophoresis

Partial-filling affinity capillary electrophoresis (PFACE) is used to examine the binding interactions between two model biological systems: D-Ala-D-Ala terminus peptides to the glycopeptide antibiotic vancomycin (Van) from Streptomyces orientalis, and arylsulfonamides to carbonic anhydrase B (CAB, EC 4.2.1.1, bovine erythrocytes). Using these two systems, modifications in the PFACE technique are demonstrated including flow-through PFACE (FTPFACE), competitive flow-through PFACE (CFTPFACE), on-column ligand synthesis PFACE (OCLSPFACE), and multiple-step ligand injection PFACE (MSLIPFACE). In PFACE small plugs of sample are injected into the capillary column and an equilibrium is established between receptor and ligand during electrophoresis. Binding constants are then obtained by Scatchard analysis using changes in the migration time of the receptor/ligand on changing the concentration of the ligand/receptor. Data demonstrating the quantitative potential of these methods are presented. This review focuses on the unique capabilities of the different PFACE techniques as applied to two model biological systems.     

一种基于B-3次样条曲线的改进的填充算法

面向服装款式CAD系统应用，提出以扫描线填充算法中的有序边表算法为核心，款式智能拼接技术中款式部件存储技术为辅助的基于B-3次样条曲线的改进的有序边表填充算法。     

BGI注入式种子填充算法及实现

区域填充问题在ＣＡＤ、科学可视化、图形图象处理等领域均有着广泛和深入的应用，研究高效的区域填充算法，是计算机图形学的重要问题之一。多边形填充算法只适用于多边形区域的填充，边界填充算法虽然对区域边界形状无严格要求，但要求区域边界颜色特征一致。为此，提出一个注入式区域填充算法，对于内点定义的区域，不要求边界颜色特征一致，在此基础上，对ＴｕｒｂｏＣ和ＢｏｒｌａｎｄＣ＋＋的图形库函数进行了扩充。该算法及其实现给相关图形的处理带来了极大的方便     

提高水砂充填能力的经验

阜新局五龙矿用水砂充填采煤法已有几十年历史,先后开采了两个水平,十多个采区,矿井有60%的产量是用这种采煤法开采出来的.在生产实践中,该矿为提高充填能力,对充填系统进行了反复研究和不断地改进,保证了回采工作面正常推进,提高了矿井回采率、维护了海州露天矿边坡,并积累了丰富的经验.值得借鉴.