Stress concentration and effective stiffness of aligned fiber reinforced composite with anisotropic constituents

The paper addresses the problem of calculation of the local stress field and effective elastic properties of a unidirectional fiber reinforced composite with anisotropic constituents. For this aim, the representative unit cell approach has been utilized. The micro geometry of the composite is modeled by a periodic structure with a unit cell containing multiple circular fibers. The number of fibers is sufficient to account for the micro structure statistics of composite. A new method based on the multipole expansion technique is developed to obtain the exact series solution for the micro stress field. The method combines the principle of superposition, technique of complex potentials and some new results in the theory of special functions. A proper choice of potentials and new results for their series expansions allow one to reduce the boundary-value problem for the multiple-connected domain to an ordinary, well-posed set of linear algebraic equations. This reduction provides high numerical efficiency of the developed method. Exact expressions for the components of the effective stiffness tensor have been obtained by analytical averaging of the strain and stress fields.     

Effects of tributyltin(IV) chloride on the gametes and fertilization of Ascidia malaca (Ascidiacea: Tunicata)

Ascidia malaca gametes before fertilization incubated in 10^?5 or 10^?7 M solutions of tributyltin(IV) chloride, TBTCl, for 3 h appear highly damaged under transmission electron microscopy observation. Also, the fertilization process is affected by the compound: the damaged spermatozoa are present in the vitelline coat and the egg does not cleave. An increase of microbodies, structurally similar to peroxisomes, have been detected in the egg peripheral cytoplasm, probably in relation to their role in alleviating damage to some cellular components. The results have shown that the reproduction of ascidians under unfavourable environmental conditions is prevented. Copyright © 2003 John Wiley & Sons, Ltd.     

羰基硫的光氧化反应研究

以熔凝紫外灯作为光源，利用FT—IR、怀特池、GC—MS、XPS等技术考察了COS与O2混合体系中COS的光氧化反应情况．结果表明，在紫外光照射下，COS能迅速光氧化分解，主要产物有CO2和SO2，光化学反应产生的部分SO2进一步氧化，以SO4^2-的形式大量存在．COS在紫外光光照下的光氧化反应遵循一级反应动力学规律，反应表观速率常数达10^-4～10^-3s^-1.O2的分压对COS光氧化速率有影响，随着氧量的增加，COS光氧化速率的增长逐渐趋于平缓．这为在光的作用下，大气中COS通过光化学反应形成SO2，形成硫酸盐气溶胶提供了实验依据．     

Isolation and purification of BVⅠ-2H from bee venom and analysis of its biological action

The medical use of bee venom for rheumatoid arthritis ( RA ) has a very long tradition. In this study, isolation and purification of polypeptides from bee venom were carried out on sephadex chromatography, heparin sepharose CL-6B chromatography and HPLC. Several fractions were extracted, and their effects on activation of splenocyte and THP-1 cell were studied. The inhibitory fraction was selected for further studies. Finally, BVⅠ-2H that the HPLC elution profiles was a single peak was isolated by C8 column. ESI- MS detection results showed that BVⅠ-2H was a fraction of bee venom, and the molecular weight of the major component was 644.8. BVⅠ-2H could inhibit ConA-induced splenocyte proliferation, IL-1 production and interfere with splenocyte cycle in mice. Moreover, BVⅠ-2H could inhibit PMA-induced TNFα production in THP-1 cells, which was due to its inhibitory effects on TNFα mRNA expression and protein phosphorylation of IκBα. Our studies indicated that BVⅠ-2H was one of the anti-inflammatory components of bee venom.     

Analysis and compare of location technologies supporting LBS

Location technology is the key part of location based service. Different technologies have different accuracy, modifying to network and cost of operating. Also these technologies have limitation to network. This paper compares existing popular location technologies and gives some suggestions about choosing of location technologies in GSM and CDMA systems.     

The role of binder mobility in spontaneous adhesive contact and implications for cell adhesion

The standard view of mechanical adhesive contact is as a competition between a reduction in free energy when surfaces with bonding potential come into contact and an increase in free energy due to elastic deformation that is required to make these surfaces conform. An equilibrium state is defined by an incremental balance between these effects, akin to the Griffith crack growth criterion. In the case of adhesion of biological cells, the molecules that tend to form surface-to-surface bonds are confined to the cell wall but they are mobile within the wall, adding a new phenomenon of direct relevance to adhesive contact. In this article, the process of adhesive contact of an initially curved elastic plate to a flat surface is studied for the case in which the binders that account for adhesion are able to migrate within the plate. This is done by including entropic free energy of the binder distribution in the total free energy of the system. By adopting a constitutive assumption that binders migrate at a speed proportional to the local gradient in chemical potential, the transient growth of an adhesion zone due to binder transport is analyzed. For the case of a plate of very large extent, the problem can be solved in closed form, whereas numerical methods are invoked for the case of a plate of limited extent. Results are presented on the rate of growth of an adhesion zone in terms of system parameters, on the evolution of the distribution of binders and, in the case of a plate of limited extent, on the long-term limiting size of the adhesion zone.     

Rapid and sensitive liquid chromatography-tandem mass spectrometry for the quantitation of epirubicin and identification of metabolites in biological samples

A highly sensitive and selective liquid chromatography-mass spectrometry (LC-MS) method has been developed for the determination of epirubicin in serum and cell specimens using daunorubicin as an internal standard. Using atmospheric pressure chemical ionisation (APCI), the epirubicin metabolites were readily distinguishable by their fragmentation pattern in the mass spectrometer. Selected reaction monitoring (SRM) mode was employed for quantitation of epirubicin and the metabolites. Following extraction, chromatography was performed on a C18 column with a mobile phase consisting of water-acetonitrile-formic acid, pH 3.2, with a flow rate of 200 μl/min. The limit of detection (LOD) and the limit of quantitation (LOQ) of this method in serum were determined to be 1.0 and 2.5 ng/ml, respectively. Linearity of the method was verified over the concentration range of 2.5-2000 ng/ml, with a high correlation coefficient (R² ≥ 0.998). For the extraction procedure, an aliquot of 500 μl serum, spiked with internal standard, was extracted using a chloroform-2-isopropanol (2:1, v/v) mixture. The method has been applied to the analysis of epirubicin in cancer cell samples and the identification of known and unknown metabolites in clinical trial patient serum samples.     

Cellular adhesion and proliferation on poly(3,4-ethylenedioxythiophene): Benefits in the electroactivity of the conducting polymer

Cell adhesion and proliferation in poly(3,4-ethylenedioxythiophene), an electroactive polythiophene derivative generated by anodic polymerization, has been investigated. Results show that epithelial cells Hep-2 present significant activity on the surface of poly(3,4-ethylenedioxythiophene) electrodeposited on stainless steel electrodes, no sign of cytotoxicity being detected for this conducting polymer. Indeed, seeded and cultured cells bound better to poly(3,4-ethylenedioxythiophene) than to uncoated stainless steel, the latter substrate being used as a control. Furthermore, the electrochemical characteristics of poly(3,4-ethylenedioxythiophene) covered with cells was determined in different biological media using cyclic voltammetry experiments. Results reveal a significant increase in the electroactivity of this material when it is covered with a cellular monolayer. The overall of the results evidences not only the biocompatibility of poly(3,4-ethylenedioxythiophene) with Hep-2 cells but also their electrocompatibility.     

Resolution of lymphocyte subpopulations derived from rat spleen by polyamine-graft-PHEMA copolymer

The retention behavior of lymphocyte subpopulations, B cell, T cell and null cell, derived from rat spleen to polyamine-graft-poly(2-hydroxyethyl methacrylate) copolymer (HA) surface was investigated, focusing on the conformational transition of the polyamine side chain as well as the protonation of amino groups in the polyamine grafts. Furthermore, the availability of HA was discussed as a column adsorbent for separation of lymphocyte subpopulations derived from spleen. The conformational transition of polyamine grafts significantly influenced the mode of retention of lymphocyte subpopulations. When polyamine grafts existed in an aggregated conformation (protonatin degree α < 0.5), the retention of lymphocyte subpopulations was decreased in the order B cell> null cell> T cell. On the other hand, when polyamine existed in an extended conformation into the aqueous interior from the matrix interface (α > 0.5), T cell retention became greater than null cell retention, resulting in a decreased B cell> T cell> null cell order. These results indicate that the differential retention of spleen lymphocyte subpopulations is attributed to their differential responses to the change in matrix interface accompanied by the protonation of amino groups. Furthermore, spleen lymphocytes were compared with lymph node lymphocytes in terms of resolution efficacy by an HA copolymer column.