二丙胺的结构微调对磷酸铝分子筛晶化过程影响的凝胶组成依赖性

以二丙胺异构体（二正丙胺DPA和二异丙胺D-iPA）为结构导向剂,在200℃加热2组反应原料物质的量之比不同的初始凝胶,合成出了高结晶度的磷酸铝分子筛AlPO₄-11。利用X射线粉末衍射分析、元素分析等表征手段,研究了凝胶的晶化过程和液相的pH值以及Al和P的浓度演化。初始凝胶各组分物质的量之比为n_Al2O3：n_P2O5：n_DPA/D-iPA：n_H2O2=1.0：1.0：1.2：75时,以DPA为结构导向剂,晶化过程中无中间相生成,而以D-iPA为结构导向剂时,晶化过程中生成了具有12元环孔道结构的磷酸铝分子筛AlPO₄-5中间相;初始凝胶各组分物质的量之比为n_Al2O3：n_P2O5：n_DPA/D-iPA：n_H2O2=1.0：1.0：1.0：75时,以DPA为结构导向剂,晶化过程中生成了具有18元环孔道结构的磷酸铝分子筛VPI-5中间相,而以D-iPA为结构导向剂时,晶化过程中同时出现了VPI-5及AlPO₄-5两种中间相。表明对于同一种有机胺,凝胶物质的量之比的改变影响了其结构导向效应。理论计算结果显示质子化的DPA及D-iPA中N原子上的电荷有差异,表明有机胺的结构微调影响其结构导向效应,但该影响依赖于凝胶组成。     

Synthesis of 2,3-dihydroquinazolin-4(1H)-ones from anthranilamide and ketones over Hβ zeolite in aqueous media*

The synthesis of 2,3-dihydroquinazolin-4(1H)-ones by cyclocondensation of anthranilamide with ketones in aqueous media using Hβ zeolite is reported. The scope of the reaction was explored by various ketones such as aromatic, aliphatic and cyclic ketones. Based on the preliminary mechanistic results, a tentative mechanism for the formation of 2,3-dihydroquinazolin-4(1H)-ones using zeolite catalyst (Hβ) is predicted. The reusability study, large-scale experiment and water as solvent showed significant benefits of this catalytic protocol in comparing to earlier methods.     

改性Y型分子筛对FCC汽油脱硫性能的研究

采用液相离子交换法制备了Cu(I)Y、NiY、CeY分子筛,利用XRD、ICP/MS、N₂吸附脱附等技术对其物化性质进行了表征,使用固定床技术和色谱-硫化学发光检测(SCD)偶联技术系统考查了改性Y分子筛对FCC汽油的选择性吸附脱硫性能,着重探讨了FCC汽油选择性吸附脱硫过程中硫化物的脱除规律。结果表明,不同金属阳离子改性的Y分子筛对FCC汽油中不同硫化物选择性有所不同,对CeY分子筛:2-甲基-5-乙基噻吩<噻吩3硫醇< C₂噻吩<2或3-甲基噻吩<苯并噻吩<3,4-二甲基噻吩≈2,3,4-三甲基噻吩<四氢噻吩,而NiY与Cu(I)Y选择性相同:C₃硫醇<2-甲基-5-乙基噻吩2噻吩<2或3-甲基噻吩<噻吩<苯并噻吩<3,4-二甲基噻吩≈2,3,4-三甲基噻吩<四氢噻吩,改性Y分子筛对噻吩及小分子烷基取代噻吩类硫化物的选择性较差。     

Fabrication of ZIF‐8@SiO2 Core–Shell Microspheres as the Stationary Phase for High‐Performance Liquid Chromatography

The unique features of high porosity, shape selectivity, and multiple active sites make metal–organic frameworks (MOFs) promising as novel stationary phases for high‐performance liquid chromatography (HPLC). However, the wide particle size distribution and irregular shape of conventional MOFs lead to lower column efficiency of such MOF‐packed columns. Herein, the fabrication of monodisperse MOF@SiO₂ core–shell microspheres as the stationary phase for HPLC to overcome the above‐mentioned problems is reported. Zeolitic imidazolate framework 8 (ZIF‐8) was used as an example of MOFs due to its permanent porosity, uniform pore size, and exceptional chemical stability. Unique carboxyl‐modified silica spheres were used as the support to grow the ZIF‐8 shell. The fabricated monodisperse ZIF‐8@SiO₂ packed columns (5 cm long × 4.6 mm i.d.) show high column efficiency (23 000 plates m^?1 for bisphenol A) for the HPLC separation of endocrine‐disrupting chemicals (bisphenol A, β‐estradiol, and p‐(tert‐octyl)phenol) and pesticides (thiamethoxam, hexaflumuron, chlorantraniliprole, and pymetrozine) within 7 min with good relative standard deviations for 11 replicate separations of the analytes (0.01–0.39, 0.65–1.7, 0.70–1.3, and 0.17–0.91 % for retention time, peak area, peak height, and half peak width, respectively). The ZIF‐8@SiO₂ microspheres combine the advantages of the good column packing properties of the uniform monodisperse silica microspheres and the separation ability of the ZIF‐8 crystals.     

Synthesis and Morphology Control of AM‐6 Nanofibers with Tailored ‐V‐O‐V‐ Intermediates

Microporous vanadosilicates with octahedral VO₆ and tetrahedral SiO₄ units, better known as AM‐6, have been hydrothermally synthesized with different morphologies by controlling the Na/K molar ratio of the initial gel mixtures. The morphology of the AM‐6 materials changed from bulky cube to nanofiber aggregates as the Na/K molar ratio decreased from 1.9 to 0.2. Raman spectroscopy revealed that the VO₃^? intermediate species plays an important role in the formation of the nanofiber morphology. The orientation of ‐V‐O‐V‐ chains in nanofiber aggregates was examined by confocal polarized micro‐Raman spectroscopy. It was found that these aggregates are assemblies of short ‐V‐O‐V‐ chains perpendicular to the axis of nanofibers. The obtained AM‐6 nanofibers greatly increase the exposed proportion of V? O terminals, and thus improve the catalytic performance.     

以四甲基铵硅酸盐为柱化剂合成层柱状MCM-36分子筛

以层状MCM-22P为前驱体,四甲基铵硅酸盐为柱化剂,采用动态水热法考察了MCM-36分子筛的合成条件,并通过XRD、N2物理吸附、TEM、27Al-MAS NMR以及NH3-TPD等手段对合成分子筛进行了表征。结果表明,与传统的采用正硅酸乙酯为柱化剂的柱化过程相比,以四甲基铵硅酸盐为柱化剂时,已溶胀的前驱体不经干燥处理即可直接在含水体系进行柱化插层合成得到层间距均一的层柱状MCM-36分子筛,适宜的合成条件为:先在80℃的高pH值(约13.5)环境下对前驱体溶胀24 h,然后在100℃下柱化插层24 h。表征结果表明,MCM-36分子筛具有层内微孔和层间介孔的复合孔道结构以及较大的比表面积(特别是外比表面积);与HMCM-22相比,HMCM-36的表面酸性虽明显降低,但其层间介孔结构的形成使大量B酸中心暴露于大分子易于接近的层间介孔孔壁,可为涉及较大分子的催化反应提供更多可接近的活性位中心。     

Selective adsorption and stable solidification of radioactive cesium ions by porous silica gels loaded with insoluble ferrocyanides

Development of highly functional cesium selective adsorbents for the decontamination of high-activity-level water(HALW) from the Fukushima NPP-1 accident is very urgent. In order to selectively adsorb the radioactive cesium, three kinds of novel porous silica gels loaded with insoluble ferrocyanides(SLFC) were prepared using a successive impregnation/precipitation method. Based on the results of previous research, the SLFC composites have relatively large uptake ratio above 95%, distribution coefficients(Kd) above 103 cm3/g, and excellent adsorption kinetics even in seawater. The solidification results also indicate that zeolites have an excellent Cs immobilization characteristic, gas-trapping and self-sintering abilities, and low leachability. We chose three kinds of SLFC composites to achieve the optimization of solidification by mixing with nine kinds of additives at high temperatures(up to 1200 °C). The Cs contents in the three composites were estimated to be below 30% of the initial contents and decreased with the three stages at calcination temperatures ranging from 25 to 1200 °C. By contrast, the Cs immobilization ratio was markedly lowered by mixing with additives: of those, allophane had the best immobilization result. By increasing the additive ratio to 50 wt%, the Cs immobilization ratio became almost 100% and no volatilization of Cs was detected even after calcination at 1200 °C. This result indicates that calcination of the mixture of SLFC composites after adsorbing Cs+ ions and specific additives under appropriate ratio is effective for stable solidification.     

Local Distortions in a Prototypical Zeolite Framework Containing Double Four-Ring Cages: The Role of Framework Composition and Organic Guests**

Cube-like double four-ring (d4r) cages are among the most frequent building units of zeolites and zeotypes. In materials synthesised in fluoride-containing media, the fluoride anions are preferentially incorporated in these cages. In order to study the impact of framework composition and organic structure-directing agents (OSDAs) on the possible occurrence of local distortions of fluoride-containing d4r cages, density functional theory (DFT) calculations and DFT-based molecular dynamics simulations were performed for AST-type zeotypes, considering four different compositions (SiO₂, GeO₂, AlPO₄, GaPO₄) and two different OSDA cations (tetramethylammonium [TMA] and quinuclidinium [QNU]). All systems except SiO₂-AST show significant deformations, with a pyritohedron-like distortion of the d4r cages occurring in GeO₂- and GaPO₄-AST, and a displacement of the fluoride anions towards one of the corners of the cage in AlPO₄- and GaPO₄-AST. While the distortions occur at random in TMA-containing zeotypes, they exhibit a preferential orientation in systems that incorporate QNU cations. In addition to providing detailed understanding of the local structure of a complex host-guest system on the picosecond timescale, this work indicates the possibility to stabilise ordered distortions through a judicious choice of the OSDA, which might enable a tuning of the material's properties.     

ZrCdOx/SAPO-18双功能催化剂催化CO2加氢合成低碳烯烃性能

采用并流共沉淀法制备了不同Zr/Cd原子比(n_Zr/n_Cd)的ZrCdO_x金属氧化物,并与水热法制备的不同硅铝比(n_{SiO_(2})/n_{Al_(2}O₃))的片状SAPO-18分子筛物理混合制得ZrCdO_x/SAPO-18双功能催化剂,研究了其催化CO₂加氢直接合成低碳烯烃性能。采用透射电子显微镜(TEM)、X射线衍射(XRD)、N2吸附-脱附、CO₂程序升温脱附(CO₂-TPD)、NH3程序升温脱附(NH3-TPD)和X射线光电子能谱(XPS)对催化剂进行了分析。与单一ZrO2相比,引入CdO使得ZrCdO_x比表面积下降,当n_Zr/n_Cd=8时制备的Zr8Cd1氧化物呈现出无定形小颗粒状,Zr与Cd之间较强的协同作用使得Zr Cd Ox氧化物产生了更多的氧空位,有利于CO₂的吸附活化。通过对Zr8Cd1金属氧化物与SAPO-18(硅铝比0.1)的质量比、工艺反应温度、压力和空速对催化性能影响的考察,获得了最佳反应条件。研究还发现,当SAPO-18的硅铝比从0.1降为0.01时,Br?nsted酸含量降低,产物中烯烃/烷烃物质的量之比从18.6提高至37.2,但副产物CO含量迅速增加,低碳烯烃时空收率明显下降。