两种以Znq2为基体的新型电致发光材料的合成与性能

以8-羟基喹啉为配体的金属配合物是一种性能优良的有机电致发光材料,其中有关8-羟基喹啉铝(Alq₃)研究已有大量报道,8-羟基喹啉锌(Znq₂)研究还有待发展。介绍了两种以Znq₂为基体的新型有机电致发光材料Znq₂(H₂O)₂和(Znq₂)₄的合成方法。用IR、XRD、TG、DTA和荧光测试方法进行表征与分析表明:Znq₂(H₂O)₂和(Znq₂)₄的玻璃化温度(T_g)分别为104.2℃和204.9℃;在161℃下Znq₂(H₂O)₂脱去水分子成为Znq₂,在361℃高温下四聚体(Znq₂)₄裂解为单体Znq₂;Znq₂(H₂O)₂和(Znq₂)₄具有很好的发光性能,在光致发光谱中λ_max分别是505,550nm。     

基于模糊神经网络的自适应PID控制器

提出了一种应用于自适应PID控制器的神经网络与模糊控制相结合的算法,该算法可以有效地解决普通PID控制器依赖于对象的数学模型的缺点,可实现控制系统的在线自适应调整,可满足实时控制的要求。仿真结果表明,基于模糊神经网络整定的PID控制器具有较好的自学习和自适应性,具有较快的响应速度。     

Gd3+对Ca0.8Zn0.2TiO3:Pr3+红色发光材料的敏化作用

采用溶胶-凝胶法在较低温度下合成了红色发光材料Ca0.8Zn0.2TiO3:0.002Pr3 ,xGd3 .金属离子预先溶解含有柠檬酸的乙二醇溶液中.XRD表明在800℃灼烧2h形成了钛酸盐的晶体.荧光检测结果表明所合成样品的特征激发峰为330nm、特征发射峰为614nm,分别对应于O(2p)→Ti(3d)带间跃迁和Pr3 的1D2→3H4的特征发射.样品的发光强度随x的不同而不同,发光强度增强了29%-69%.当x＝0.0005时,即nPr3 :nGd3 ＝4∶1时样品的红色发光强度最强,发光强度增强了69%.     

Isolation and Characterization of Proteins Interacting with Activin Type Ⅱ Receptors

Introduction Activinisamemberofthetransforminggrowth factor(TGF)βsuperfamilyofextracellularsignaling proteins.Themembersofthisfamilyplayacriticalrole duringembryogenesisandinmaintainingtissuehomeo stasisinadultlife[1—3].DeregulatedTGFfamilysigna lingisi…     

Widely tunable long-period fiber grating with nm-thick higher refractive index film overlay

By introducing a four-layer step-index waveguide modeling, the characteristics of long-period fiber grating (LPFG) with an nm-thick film overlay, which has higher refractive index than that of fiber cladding are investigated in detail. The influence of both the overlay thickness and refractive index on the tuning ability of LPFG is analyzed. The numerical results demonstrate that spectral response of LPFG is divided into three distinct regions as the overlay deposition increases and the shift of resonant wavelength is drastic in some special thickness range. In conjunction with higher-order cladding mode coupling and fiber cladding etching, the sensitivity of LPFG to the overlay refractive index is enhanced significantly and over 120 nm resonant wavelength tunable range is achieved.     

Well-posed absorbing layer for hyperbolic problems

Summary. The perfectly matched layer (PML) is an efficient tool to simulate propagation phenomena in free space on unbounded domain. In this paper we consider a new type of absorbing layer for Maxwell's equations and the linearized Euler equations which is also valid for several classes of first order hyperbolic systems. The definition of this layer appears as a slight modification of the PML technique. We show that the associated Cauchy problem is well-posed in suitable spaces. This theory is finally illustrated by some numerical results. It must be underlined that the discretization of this layer leads to a new discretization of the classical PML formulation. Received May 5, 2000 / Published online November 15, 2001     

Holographic interferometry as electrochemical emission spectroscopy of a carbon steel in 5–20 ppm TROS C-70 inhibited seawater

In the present investigation, holographic interferometry was utilized for the first time to determine the rate change of the number of the fringe evolutions during the corrosion test of a carbon steel in blank seawater and seawater with different concentrations of a corrosion inhibitor. In other words, the anodic dissolution behaviors (corrosion) of the carbon steel were determined simultaneously by holographic interferometry, as an electromagnetic method, and by the electrochemical impedance (EI) spectroscopy, as an electronic method. So, the abrupt rate change of the number of the fringe evolutions during corrosion tests, EI spectroscopy, of the carbon steel is called electrochemical emission spectroscopy. The corrosion process of the steel samples was carried out in blank seawater and seawater with different concentrations, 5–20 ppm, of TROS C-70 corrosion inhibitor using the EI spectroscopy method, at room temperature. The electrochemical-emission spectra of the carbon steel in different solutions represent a detailed picture of the rate change of the anodic dissolution of the steel throughout the corrosion processes. Furthermore, the optical interferometry data of the carbon steel were compared to the data, which was obtained from the EI. spectroscopy. Consequently, holographic interferometry is found very useful for monitoring the anodic dissolution behaviors of metals, in which the number of the fringe evolutions of the steel samples can be determined in situ.     

Time-resolved fluorescence spectra of a bichromophoric molecule, 2-methyl-1,2,3,4-tetrahydroisoquinoline in various media

Time-resolved fluorescence spectra of a title molecule (with benzene and aliphatic amine parts) in various media, after excitation by several lasers were observed to complement the previous work by conventional spectroscopy [N. Kanamaru, J. Tanaka, J. Phys. Chem. 95 (1991) 6441]. Though complex with many new features, the results were roughly consistent with the previous ones. The significant conclusions are as follows: (1) The emission to be ascribed to the amine (N) part, with more than one component (of nN and aN types) is observed not only for the acetonitrile solution (as previously reported) but also for all the other media. (2) Contrary to the case of a nonpolar hexane solution, both of N fluorescences in the other media reveal unusually long-lived decay components. This can be interpreted by assuming the so-called charge-transfer-to-solvent (CTTS) state that is nonfluorescent and lies just below the fluorescent state. (3) This observation in the protic media can also be taken as another evidence of the peculiar hydrogen bonding between this amine and the protic solvent molecules [N. Kanamaru, J. Tanaka, J. Phys. Chem. 95 (1991) 6441]. (4) Thus, the unexpectedly large quantum yields of N fluorescences in the polar media are now interpreted as arising due to the slow S₁^N→(CTTS)→S₀ internal conversions.     

无线移动自组网络的动态源路由策略

文章介绍无线移动自组网中动态源路由策略的路由发现和路由维护,并提出改进思路和今后研究的方向。     

双面金属包覆介质波导模序数的判别方法

在双面金属包覆介质波导中 ,随着介质层厚度的变化 ,会出现TM0 模与TM1 模的分离和简并两种状态 ,从而影响衰减全反射 (ATR)谱中模序数的确认。通过对金属波导的理论分析和实验研究 ,提出了三种模序数确认方法 :本征角计算法、吸收峰全峰半宽比较法和吸收峰峰间距比较法 ,实现了两种状态下对模序数的准确判断