LO-phonon effect on the exciton binding energy in polar rectangular quantum wires

Longitudinal optical phonon effect on Wannier excitons in polar rectangular quantum wires is studied by a variational approach. The binding energy is calculated and the numerical results for several II-VI and III-V compound semiconductor rectangular quantum wires are given. The results show that the phonon effect reduces the binding energy and cannot be neglected. The phonon contribution to the binding energy is sensitive to the size of the rectangular quantum wire section, and increases with decreasing section area. The results for the GaAs rectangular quantum wires coincide with the experimental results. The calculated binding energy and the phonon effect in II-VI QWWs are both stronger than those in III-V compound systems, and the results for ZnSe QWW are qualitatively in agreement with the experiments.     

Electron transport of a quantum wire with spatially periodic spin–orbit coupling

Electron transport properties of an ideal one-dimensional (1D) quantum wire are studied including spatially periodic Rashba spin–orbit coupling (SOC) and Dresselhaus SOC. By comparing with the previous work [S.J. Gong, Z.Q. Yang, J. Phys. Condens. Matter 19 (2007) 446209], two transmission gaps appear in the transmission probability of electrons and their widths are also broadened dramatically. Moreover, it is found that their widths are sensitive not only to the strength of SOCs but also to the length ratio of SOCs segment and non-SOCs segment. In addition, a ‘circle-type’ transmission behavior has been found by tuning the strength of SOCs continuously. Our results may extend the previous work and provide an more effective method to manipulate the current in nanoelectric devices.     

运用微量物证技术鉴定汽车吊钢丝绳断裂原因

通过对20吨汽车起重机钢丝绳进行拆股检测、断口分析、显微组织分析检测,分析钢丝绳断裂原因,结果表明钢丝绳的磨损严重,存在多处断股是其断裂的直接原因。     

Integrated Devices to Realize Energy Conversion and Storage Simultaneously

Other forms of energy are generally converted to electric energy and then transported to electrochemical devices, where the energy is stored, by external electric wires. To further improve total energy conversion and storage efficiency, interest in simultaneously realize the energy conversion and storage in a single device has increased. This Concept describes recent progress in developing such novel integrated energy devices. Both planar and wire architectures are carefully illustrated with an emphasis on the “energy wire” which has been the focus of past developments due to its unique and promising applications, such as being woven into clothes or other complex structures by conventional textile technology. The current challenges and future directions of the integrated devices, particularly in the wire architecture, are summarized.     

Electrothermal atomic absorption spectrometric determination of cadmium in environmental samples with niobium wire preconcentration method

A preconcentration method by adsorption of cadmium on a niobium wire was developed for the environmental waters, followed by electrothermal atomic absorption spectrometry with a tungsten tube atomizer. After the preconcentration, the niobium wire was directly inserted into the tungsten tube atomizer. In the preconcentration (adsorption) process of cadmium, the optimal immersing time was 60?s. The effects of large amounts of concomitants on the preconcentration of cadmium were evaluated. When 10³–10⁴ fold excess of matrix elements existed in aqueous solution at pH 4 and 9, the cadmium response was profoundly affected by the matrix elements. However, the cadmium absorption signal was not significantly influenced at pH 7. Therefore, pH 7 was selected for the application into the real environmental samples. Under the optimal conditions, the detection limit (3S/N) for cadmium by the niobium wire preconcentration method was 7.0?pg?mL^?1 and the relative standard deviation was 6.8%. The method with preconcentration on a niobium wire was applied to the determination of cadmium in water and proved to be sensitive, simple and convenient. Because this preconcentration method can be utilized in the in situ treatment of trace cadmium in environmental water samples, it was unnecessary to carry the water samples to the analytical work place. The technique was shown to be useful for the determination of cadmium in environmental water samples at 0.1–1?µg?L^?1 levels.     

电场对金属串配合物M3(dpa)4Cl2 (M=Co,Rh, Ir; dpa=dipyridylamide)结构的影响

应用密度泛函理论PBE0 方法研究具有分子导线潜在应用的金属串配合物M₃(dpa)₄Cl₂ (1: M=Co, 2: M=Rh, 3: M=Ir; dpa=dipyridylamide)在电场作用下的几何和电子结构. 结果表明: 配合物基态均是二重态. 1和2的M₃⁶⁺金属链形成三中心三电子σ键, 3 中M₃⁶⁺形成三中心四电子σ键且存在弱的δ键. 随金属原子周期数增大其M―M键增强、LUMO与HOMO能隙减小、金属原子的反铁磁耦合减弱以至消失且自旋密度向配体的离域增强. 在Cl4→Cl5 电场作用下, 低电势端的M3－Cl5 键缩短, 高电势端的M2―Cl4 键增长, M―M平均键长略为缩短, M―M键增强, 有利于分子线的电子传递; 分子能量降低, 偶极矩线性增大. 低电势端Cl5的负电荷向高电势端Cl4 转移, 且3 中金属原子的正电荷由高电势端向低电势端的转移较明显, 自旋电子由低电势端向高电势端金属原子移动, 但桥联配体dpa^-与M和Cl 所在的分子轴间没有电荷转移. 电场使LUMO与HOMO能隙减小, 有利于分子的电子输运. 随金属原子周期数增大, 电场作用下M―M平均键长变化减小, LUMO、HOMO的能级交错现象减少.     

Development of a solid‐phase microextraction fiber by the chemical binding of graphene oxide on a silver‐coated stainless‐steel wire with an ionic liquid as the crosslinking agent

Graphene oxide was bonded onto a silver‐coated stainless‐steel wire using an ionic liquid as the crosslinking agent by a layer‐by‐layer strategy. The novel solid‐phase microextraction fiber was characterized by scanning electron microscopy, energy‐dispersive X‐ray spectroscopy and Raman microscopy. A multilayer graphene oxide layer was closely coated onto the supporting substrate. The thickness of the coating was about 4 μm. Coupled with gas chromatography, the fiber was evaluated using five polycyclic aromatic hydrocarbons (fluorene, anthracene, fluoranthene, 1,2‐benzophenanthrene, and benzo(a)pyrene) as model analytes in direct‐immersion mode. The main conditions (extraction time, extraction temperature, ionic strength, and desorption time) were optimized by a factor‐by‐factor optimization. The as‐established method exhibited a wide linearity range (0.5–200 μg/L) and low limits of determination (0.05–0.10 μg/L). It was applied to analyze environmental water samples of rain and river water. Three kinds of the model analytes were quantified and the recoveries of samples spiked at 10 μg/L were in the range of 92.3–120 and 93.8–115%, respectively. The obtained results indicated the fiber was efficient for solid‐phase microextraction analysis.     

真空中铝单丝电爆炸的实验研究

开展了铝单丝在负极性电流脉冲作用下电爆炸特性的研究.利用皮秒激光探针,搭建了阴影、纹影和干涉的光学诊断平台,得到了不镀膜铝丝典型的能量沉积过程,在电压崩溃时刻其沉积能量为2.4 eV/atom.为了增加金属丝内的沉积能量,开展了相同电参数及金属丝尺寸下的镀膜铝丝电爆炸实验,其沉积能量可达到5 eV/atom,实现了在电压崩溃之前铝丝完全气化(完全气化所需能量为4 eV/atom).阴影图像展示了高密度丝核区域的膨胀过程,不镀膜铝丝平均膨胀速度为2.2 km/s,而镀膜铝丝因为沉积能量大,其膨胀速度约为不镀膜铝丝的2.3倍,高密度区域膨胀速度为5 km/s.由于阴影不能反映低密度等离子体的膨胀,开展了平行双丝实验,通过测量自发光辐射,估算了低密度等离子体的膨胀速度.利用条纹相机拍摄了不镀膜铝丝电爆炸过程中自发光区域的图像.纹影图像清晰地展示了不镀膜铝丝在电爆炸过程中形成的核冕结构,而镀膜铝丝电爆炸过程中核冕结构得到了一定程度的抑制.从干涉图像计算了相移,在轴对称假设下对相移进行阿贝尔逆变换,重构了三维的铝原子数密度分布.     

Hybrid process for texturization of diamond wire sawn multicrystalline silicon solar cell

Acid texture is difficult for diamond wire sawn (DWS) multicrystalline silicon (mc‐Si) wafer owing to the inhomogeneous distribution of damage layer on the surface. In this article, metal‐assisted chemical etching (MACE) has been selected for introducing a porous seeding layer to induce acid texturing etching. SEM results show that the oval pit structures coverage get obvious improvement even on the smooth areas. Owing to the further improved light absorption ability by second MACE and nanostructure rebuilding (NSR) process, nanostructured DWS mc‐Si solar cell has exhibited a conversion efficiency of 17.96%, which is 0.45% higher than that of DWS wafer with simple acid texture process. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)