Evaluation of 3D Printed Gelatin‐Based Scaffolds with Varying Pore Size for MSC‐Based Adipose Tissue Engineering

Adipose tissue engineering aims to provide solutions to patients who require tissue reconstruction following mastectomies or other soft tissue trauma. Mesenchymal stromal cells (MSCs) robustly differentiate into the adipogenic lineage and are attractive candidates for adipose tissue engineering. This work investigates whether pore size modulates adipogenic differentiation of MSCs toward identifying optimal scaffold pore size and whether pore size modulates spatial infiltration of adipogenically differentiated cells. To assess this, extrusion‐based 3D printing is used to fabricate photo‐crosslinkable gelatin‐based scaffolds with pore sizes in the range of 200–600 µm. The adipogenic differentiation of MSCs seeded onto these scaffolds is evaluated and robust lipid droplet formation is observed across all scaffold groups as early as after day 6 of culture. Expression of adipogenic genes on scaffolds increases significantly over time, compared to TCP controls. Furthermore, it is found that the spatial distribution of cells is dependent on the scaffold pore size, with larger pores leading to a more uniform spatial distribution of adipogenically differentiated cells. Overall, these data provide first insights into the role of scaffold pore size on MSC‐based adipogenic differentiation and contribute toward the rational design of biomaterials for adipose tissue engineering in 3D volumetric spaces.     

Influence of nonlinear spatial distribution of stress and strain on solving problems of solid mechanics

Applied Mathematics and Mechanics - The stress and the strain should be defined as statistical variables averaged over the representative volume elements for any real continuum system. It is shown...     

Nonlinear free vibrations of porous composite microplates incorporating various microstructural-dependent strain gradient tensors

The main objective of the present numerical analysis is to predict the nonlinear frequency ratios associated with the nonlinear free vibration response of porous composite plates at microscale in the presence of different microstructural gradient tensors. To achieve this end, by taking cubic-type elements into account, isogeometric models of porous composite microplates are obtained with and without a central cutout and relevant to various porosity patterns of distribution along the plate thickness. The established unconventional models have the capability to capture the effects of various unconventional gradient tensors continuity on the basis of a refined shear deformable plate formulation. For the simply supported microsized uniform porous functionally graded material (U-PFGM) plate having the oscillation amplitude equal to the plate thickness, it is revealed that the rotation gradient tensor causes to reduce the frequency ratio about 0.73%, the dilatation gradient tensor causes to reduce it about 1.93%, and the deviatoric stretch gradient tensor leads to a decrease of it about 5.19%. On the other hand, for the clamped microsized U-PFGM plate having the oscillation amplitude equal to the plate thickness, these percentages are equal to 0.62%, 1.64%, and 4.40%, respectively. Accordingly, it is found that by changing the boundary conditions from clamped to simply supported, the effect of microsize on the reduction of frequency ratio decreases a bit.

     

Effect of Gaussian size distribution width on minimum fluidization velocity in tapered gas–solid fluidized beds

This paper investigated the effect of Gaussian distribution width, average particle diameter, particle loading, and the tapered angle on minimum fluidization velocity (U_mf) by conducting extensive experiments in tapered fluidized beds. Three powders with Gaussian size distribution and different distribution widths were used in the experiments. An increase in U_mf with increasing the average particle diameter, particle loading, and the tapered angle was observed. There was also a nonmonotonic behavior of U_mf as the Gaussian distribution width increased. An empirical correlation including dimensionless groups for predicting U_mf in tapered beds was developed in which the effect of distribution width was considered. The proposed correlation predictions were in good agreement with the experimental data, with a maximum deviation of 16.5% and average and standard deviations of, respectively, 6.4% and 7.4%. The proposed correlation was also compared with three earlier models, and their accuracy was discussed.     

Maleic anhydride homopolymerization during melt functionalization of isotactic polypropylene

The homopolymerization of maleic anhydride was attempted at 190°C, during the melt-functionalization of polypropylene, either with or without organic peroxide using a Brabender plastograph. The free radical homopolymerization of pure maleic anhydride was also attempted either with or without organic peroxide, at 190°C, in vacuum-sealed glass vials. In all cases, free low molecular weight maleic anhydride oligomers were observed by low molecular weight size exclusion chromatography (SEC). This maleic anhydride homopolymerization tends to prove that the ceiling temperature of poly(maleic anhydride) probably lies above the previously published value of 160°C for these specific experimental conditions. © 1996 John Wiley & Sons, Inc.     

分散剂PVA对水热反应制备LiFePO4性能的影响

应用改进的水热反应法制得粒径小且分布均匀的L iFePO4颗粒,煅烧时加葡萄糖形成包覆碳.XRD、SEM和充放电测试表明,该材料粒径约200 nm,颗粒的尺寸分布比较均匀,具有3.45 V的放电平台,放电容量最高达到140 mAh/g,循环到第40周容量仅衰减2.1%.详细讨论了如何有效调控L iFePO4的粒子尺寸以及包覆碳对其电化学性能的影响.     

一种提高雷达系统输出信噪比的方法

在给定雷达的检测概率和虚警概率后,系统输出信噪比直接影响雷达的作用距离。采用距离分段加权技术,可以减小加权引起的信噪比损失,从而提高了雷达的作用距离。给出了泰勒窗函数在距离分段加权中的应用,事实已证明该方法的可行性。     

一种新的变步长LMS自适应滤波算法

本文通过建立步长因子μ与误差信号之间的非线性函数关系,提出了一种新的变步长LMS(LeastMean Square)算法.该算法具有初始阶段和未知系统时变阶段步长自动增大而稳态时步长很小的特点,且克服了S函数变步长LMS算法(简称SVSLMS算法)在自适应稳态阶段μ(n)取值偏大的缺陷.理论分析和计算机仿真结果表明该算法的性能优于SVSLMS算法.     

The controlled flocculation of submicron emulsion particles. I. A three-step synthetic route to supermicron polymer particles

The basic features of a three-step experimental process to produce supermicron polymer particles are described. First, a submicron emulsifier-free latex is prepared by a well-known technique. Second, the latex is aggregated by destabilizing with cetyl pyridinium chloride under constant stirring conditions, to yield roughly spherical clusters of 6-12 μ diameter. Third, the aggregates are stabilized with poly(vinyl alcohol) and internally coalesced by heating at or above the glass transition temperature. The final product particles have relatively smooth surfaces. Results are qualitatively interpreted in terms of a dynamic equilibrium where the aggregate size is determined by a balance between attractive interparticle potentials and stirring shear forces. Bimodal aggregate size distributions suggest the aggregate break-up mechanism may involve the erosion of individual latex particles and small fragments from the surface of aggregates. © 1996 John Wiley & Sons, Inc.     

Effects of High-Intensity Ultrasound Pretreatment on Structure,Properties, and Enzymolysis of Walnut Protein Isolate

The purpose of this paper was to investigate the effect of high-intensity ultrasonication (HIU) pretreatment before enzymolysis on structural conformations of walnut protein isolate (WPI) and antioxidant activity of its hydrolysates. Aqueous WPI suspensions were subjected to ultrasonic processing at different power levels (600–2000 W) and times (5–30 min), and then changes in the particle size, zeta (ζ) potential, and structure of WPI were investigated, and antioxidant activity of its hydrolysates was determined. The particle size of the particles of aqueous WPI suspensions was decreased after ultrasound, indicating that sonication destroyed protein aggregates. The ζ-potential values of a protein solution significantly changed after sonication, demonstrating that the original dense structure of the protein was destroyed. Fourier transform infrared spectroscopy indicated a change in the secondary structure of WPI after sonication, with a decrease in β-turn and an increase in α-helix, β-sheet, and random coil content. Two absorption peaks of WPI were generated, and the fluorescence emission intensity of the proteins decreased after ultrasonic treatment, indicating that the changes in protein tertiary structure occurred. Moreover, the degree of hydrolysis and the antioxidant activity of the WPI hydrolysates increased after sonication. These results suggest that HIU pretreatment is a potential tool for improving the functional properties of walnut proteins.