W波段64通道相控阵微系统设计与实现

相控阵微系统的主要特征是电路与天线的高度融合集成,将三维微纳集成技术和微电子技术紧密地结合在一起,切合相控阵高频化、小型化和低成本的发展需求。本文设计了一款W波段的封装天线相控阵微系统,该相控阵采用硅基三维集成的方式将T/R多功能芯片、天线阵列集成在一个微系统模块中,并详细介绍了基于硅工艺的多功能收发芯片设计和相控阵封装天线设计。给出了相控阵微系统的测试结果。该微系统具有高集成度、高性能、低成本的特点,可以为高速无线通信、高精度探测和成像等应用提供一个较优的技术路径。     

PHOTOEMISSION WITHIN AND BEYOND THE ONE-STEP MODEL

Photoemission in the vacuum ultraviolet photon regime has proved to be an effective tool for the investigation of valence band surface electronic structure. The interpretation cannot be exclusively confined to the valence bands but has to consider cross sections with realistic final states consistently designed within the one-step model. Therefore especially in the surface sensitive photoemission, several effects hide the final goal of deducing the energetic and wavefunction structure together with microscopic potential parameters through a convincing agreement of calculated with measured spectra. The final states band structure is much less well understood than the valence band structure under consideration. The optical potential, which controls the surface sensitivity through the underlying damping mechanisms, widely relies on empirical assumptions. Furthermore, the photon field is not only strongly influenced but in the vicinity of the plasma frequency also deteriorated by the electronic response. In view of high resolution spectroscopy the accuracy of the data interpretation is affected, and in fact, band-mapping methods are no longer valid. Examples of recent calculations to account for these effects are reviewed.     

Comparison between the adsorption behaviors of an organic cation and an organic anion on several reversed-phase liquid chromatography adsorbents

Adsorption data of an organic cation (propranololium chloride) and an organic anion (sodium 1-naphthalene sulfonate) were measured by frontal analysis on two RPLC adsorbents, Symmetry-C18 and XTerra-C18, with aqueous solutions of methanol as the mobile phases. The influence of supporting neutral salts on the adsorption behavior of these two ions are compared. The Henry constants are close (H approximately 5). The four sets of isotherm data are all well accounted for using the bi-Moreau model. However, the isotherms of the two ions behave differently at high concentrations. The initial behaviors of all the isotherms are antilangmuirian but remain so in a much wider concentration range for the cation than for the anion, due to its stronger adsorbate-adsorbate interactions on the low-energy adsorption sites. The retention times of both ions increase with increasing concentration of neutral salt in the mobile phase, suggesting the formation of ion-pair complexes, with Cl- for the cation and with Na+ for the anion. The adsorbate-adsorbate interactions vanish in the presence of salt and the bi-Moreau isotherm model tends toward a bi-Langmuir model. Differences in adsorption behavior are also observed between the cation and the anion when bivalent inorganic anions and cations, respectively, are dissolved in the mobile phase. High concentration band profiles of 1-naphthalene sulfonic acid are langmuirian, except in the presence of a trivalent cation, while those of propranolol are antilangmuirian under certain conditions even with uni- or divalent cations.     

Comparison between adsorption isotherm determination techniques and overloaded band profiles on four batches of monolithic columns

The adsorption isotherms of 4-tert.-butyl phenol were measured on four different monolithic columns, using three different techniques, classical frontal analysis (FA), the perturbation on a plateau method (PP) and the recently introduced numerical procedure known as the inverse numerical method (IN). This last approach requires only the recording of a few overloaded profiles and has the potential advantage of affording a dramatic decrease of the amounts of compounds, solvent, and time needed to determine accurate estimates of the coefficients of the isotherm. The reproducibility of the adsorption data measured on the four columns is discussed with reference to the specific techniques used for obtaining these data and to the most suitable equation used for modeling them. The data obtained for the different columns were highly consistent. The inverse numerical approach was confirmed to provide a powerful, accurate, and economic method for measuring single component adsorption data.     

Estimation of the instrumental band broadening contribution to the column elution profiles in open tubular capillary liquid chromatography

In comparison with conventionally packed HPLC columns, from a theoretical point of view, open capillary liquid chromatography (OTLC) systems offer a number of advantages like high plate numbers and short analysis times. On the other hand, drastic changes have to be made to the instrumentation. In particular, the contribution to band broadening by the chromatographic equipment must be considerably reduced. In the present study an OTLC system was developed and evaluated, which yields satisfactory results for 26 μm i. d. columns. The determination of the contribution of the chromatographic equipment to the total band broadening is discussed.     

C36填充单壁碳纳米管的结构和电子性质

The structures and electronic properties for C36 encapsulated in four single-wall armchair carbon nanotubes (C36@(n,n), n=6-9) were calculated using ab initio self-consistent field crystal orbital method based on density functional theory. The calculations show that the interwall spacing between the carbon nanotube and C36 plays an important role in the stabilities of resultant structures. The optimum interwall spacing is about 0.30 nm and the tubes can be considered as inert containers for the encapsulated C36. The Fermi levels and relative position of energy bands also have something to do with the interwall spacing. The shifts of Fermi level and C36-derived electron states modulate the electron properties of these structures. The extra electrons fill the bands of C36@(8,8) with the optimum interwall spacing almost in a rigid-band manner.     

Succession of stacking disorder in hard-sphere crystal under gravity by Monte Carlo simulation

We have performed Monte Carlo simulations of hard spheres under gravity. Vertical boundaries are hard walls, which are well separated with each other. On the other hand, the periodic boundary condition is imposed in the horizontal direction. While we previously reported enhancement of crystallinity as well as crystallization due to gravity, we present here the results that demonstrate the succession of a defect. In case that the crystal formed at the bottom of the system includes kinds of stacking disorders for the (0 0 1) growth, twin band structure develops as mediated by a stacking disorder succeeded in the crystal formed in the fluid region which lies on the bottom crystal. In case that the stacking structure along horizontal direction changes from the (1 1 1) stacking to the (0 0 1) stacking, twin band structure in the (0 0 1) stacking region develops as succeeded in the crystal transformed. The twin band structure also becomes large with its upward growth.     

Band structure of even and ions of odd polyenes

The analysis of experimental data for singlet transitions (E _n) of even polyenes (I), cations (II) and anions (III) of odd polyenes show that for infinite chains E (I)/E (II)=E (I)/E (III) = 2:1. It is shown that the energy gap is equal for the three systems. In cases (II) and (III) there is a level (NBMO) in the gap which is vacant in (II) and occupied in (III). That is why the first optical transition in (II) and (III) depends on the semiwidth of the gap.     

Synthesis,optical, and electrochemical properties of novel copolymers on the basis of benzothiadiazole and electron‐rich arene units

Novel alternating conjugated copolymers ( P1–P6 ) consisting of an electron‐deficient benzothiadiazole and a variety of electron‐rich thiophene‐arene‐thiophene units were synthesized by palladium‐catalyzed polycondensations (Stille and Suzuki reactions), aiming at processable materials with a reduced optical band gap. The structures of P1–P6 were confirmed by ¹H NMR and ¹³C NMR, and their molecular weights were determined by size exclusion chromatography. In the Suzuki polycondensation, the role of the catalyst [Pd(PPh₃)₄ and Pd(OAc)₂] on the resulting molecular weight was investigated. Pd(OAc)₂ enhances the molecular weight of the polymers for both thiophene and phenylene bis‐boronic esters as compared with Pd(PPh₃)₄. The optical properties of the polymers were examined in solution and the solid state. The polymers with n‐octyl substituents ( P1 , P4 , P5 , and P6 ) on the thiophene rings possessed less‐planar structures as a result of torsional steric hindrance, and their absorption spectra appeared blueshifted as compared with their unsubstituted analogues ( P2 and P3 ). The electrochemical properties of the polymers were studied using cyclic voltammetry. Although the alkyl substitution affects the oxidation potential, only marginal differences in the reduction potentials were observed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2360–2372, 2002     

On the applicability of the “abt” concept

Kaiser's “abt” concept rests on the experimental establishment of a linear relation between band width at half height, b_0.5, and capacity ratio, k, according to His column specification quantity, h_real, is dependent on the square of the slope a, obtained from a linear regression analysis based on this relation. It is shown in the present paper that an improvement of the experimental conditions leading to a lower extra-column contribution to band broadening, b, introduces a tendency towards a negative curvature in the plot at low k values. The mean slope increases, and an uncritical linear regression would yield an h_real-value which is higher than before and which would be in the opposite direction to the requirements of a reliable column specification. Generally the linear regression analysis has to be moved to higher k regions in cases of curvature, especially as it is also shown that h_real is an estimation of the traditional HETP value, H∞, that would be obtained when k approaches infinity. This theoretically expected relation is a strong motivation for the use of h_real as a column specification, since the b_0.5-value associated with H∞ is expected to be practically independent of b.