Reactive polymers incorporating silyl enol ether groups. I. synthesis by radical polymerization of 2-(trimethylsiloxy)-butadiene and 2-(tert)-butyldimethylsiloxy butadiene

2-(Trimethylsiloxy)butadiene (TMSBD) and 2-(tert-butyldimethylsiloxy)butadiene (TBMSBD) were copolymerized with styrene (St) and methyl methacrylate (MMA) under free-radical conditions. The obtained polymers were found to contain reactive silyl enol ether groups in a ratio identical to the TMSBD or TBMSBD molar fraction in the copolymer. All investigated samples displayed only 1,4- and 3,4-microstructures. The influence of several experimental factors on the yields, rates of polymerization, microstructures, and copolymer compositions were examined. Monomer reactivity ratios r₁ and r₂ at 60°C were determined from copolymer composition curves at low conversions. The homopolymerization of TBMSBD was also investigated and results were compared with those previously obtained for TMSBD. A slight increase in rates was observed and was rationalized on the basis of the higher viscosity resulting from the structural change in the monomer. Thermal stabilities of the synthesized polymers were investigated by TGA and their glass transition temperatures were determined by DSC. All measurements are compatible with a possible use of TMSBD and TBMSBD copolymers as reactive polymers. © 1996 John Wiley & Sons, Inc.     

Some novel photosensitive diacetylene diurethanes and their mixtures in common polymers

Some new octa-3,5-diynylene diurethanes were prepared using 3-butyn-1-ol, and all were found to be highly light-sensitive and to undergo topochemical polymerization on exposure to irradiation. The di-n-octyldiurethane was mixed with vinyl polymers such as poly(vinyl acetate) and poly(N,N-dimethylamino-ethyl methacrylate) and the mixtures were made into thin films by spin coating. The films were then irradiated by an electron beam to polymerize the diacetylene. The purple films thus obtained showed third-order nonlinear susceptibility, χ⁽³⁾, of the order of 10⁻¹⁰–10⁻¹¹ e.s.u.     

A literature review on the in situ generation of reinforcing fibers

Liquid crystal polymers (LCPs) are a relatively new class of materials. These polymers usually consist of rigid rodlike molecular chains and they are capable of forming highly oriented structures even in the as-made product, with strength/modulus significantly higher than those of the conventional flexible chain polymers. Blending of LCPs with conventional polymers produces composite-like structures with LCPs serving as the reinforcing component. The properties of the blends are affected by the size, shape and distribution of the LCPs in the matrix polymer, which in turn are related to the processing conditions such as the blend composition, the extrusion and drawing conditions, the viscosity ratio of the component polymers and the type and grade of the LCPs and the matrix polymers. Improved processability of the blend due to the reduction in viscosity and the improved interfacial adhesion between reinforcing fibers and the matrix polymer are among the advantages of these materials over the conventional short fiber reinforced composites. This paper gives a brief review of the work currently available in the literature on rheology, fabrication, blend morphology and mechanical/thermal properties of the in situ composites from blends of LCPs and conventional polymers.     

雾化辅助化学气相沉积法氧化镓薄膜生长研究

采用自主设计搭建的雾化辅助化学气相沉积系统设备,开展了Ga₂O₃薄膜制备及其特性研究工作。通过X射线衍射研究了沉积温度、系统沉积压差对Ga₂O₃薄膜结晶质量的影响。结果表明,Ga₂O₃在425~650 ℃温度区间存在物相转换关系。随着沉积温度从425 ℃升高至650 ℃,薄膜结晶分别由非晶态、纯α-Ga₂O₃结晶状态向α-Ga₂O₃、β-Ga₂O₃两相混合结晶状态改变。通过原子力显微镜表征探究了生长温度对Ga₂O₃薄膜表面形貌的影响,从475 ℃升高至650 ℃时,薄膜表面粗糙度由26.8 nm下降至24.8 nm。同时,高分辨X射线衍射仪测试表明475 ℃、5 Pa压差条件下的α-Ga₂O₃薄膜样品半峰全宽仅为190.8″,为高度结晶态的单晶α-Ga₂O₃薄膜材料。     

基于像全息技术的资料存储

文中利用像全息技术,对二维文字资料作了全息存储,并对实验结果进行了分析,不仅 提高了存诸质量,而且为今后的全息显示打下了基础。     

Characterisation of Flavour Attributes in Egg White Protein Using HS-GC-IMS Combined with E-Nose and E-Tongue: Effect of High-Voltage Cold Plasma Treatment Time

Egg white protein (EWP) is susceptible to denaturation and coagulation when exposed to high temperatures, adversely affecting its flavour, thereby influencing consumers’ decisions. Here, we employ high-voltage cold plasma (HVCP) as a novel nonthermal technique to investigate its influence on the EWP’s flavour attributes using E-nose, E-tongue, and headspace gas-chromatography-ion-mobilisation spectrometry (HS-GC-IMS) due to their rapidness and high sensitivity in identifying flavour fingerprints in foods. The EWP was investigated at 0, 60, 120, 180, 240, and 300 s of HVCP treatment time. The results revealed that HVCP significantly influences the odour and taste attributes of the EWP across all treatments, with a more significant influence at 60 and 120 s of HVCP treatment. Principal component analyses of the E-nose and E-tongue clearly distinguish the odour and taste sensors’ responses. The HS-GC-IMS analysis identified 65 volatile compounds across the treatments. The volatile compounds’ concentrations increased as the HVCP treatment time was increased from 0 to 300 s. The significant compounds contributing to EWP characterisation include heptanal, ethylbenzene, ethanol, acetic acid, nonanal, heptacosane, 5-octadecanal, decanal, p-xylene, and octanal. Thus, this study shows that HVCP could be utilised to modify and improve the EWP flavour attributes.     

Impact of drifts in the ASDEX upgrade upper open divertor using SOLPS-ITER

SOLPS-ITER L-mode-like simulations with the full set of currents and drift velocities activated, and fluid neutrals have been carried out to interpret experimental results obtained in AUG. Drifts are critical to quantitatively reproduce the experimental results; however, simulations without drifts can also reproduce some trends qualitatively. The magnitude and dependence of the peak heat flux onto both targets on the upstream collisionality are, in general, in quantitative agreement within uncertainties with infrared thermography measurements in favourable field direction. The onset of power detachment is observed. In unfavourable toroidal field direction, a more symmetrical inner/outer target solution with regards to the power distribution is predicted, in agreement with experimental observations. However, also in unfavourable toroidal field direction, insufficient power is dissipated in the simulations and therefore q_{peak, inn} is overpredicted by up to a factor of 4 and q_{peak, out} by up to a factor of 1.5. The largest contribution to the sources due to radial transport in the energy balance equation is the radial divergence of the energy flux due to V_{E × B}.     

The Upper Semicontinuity of Random Attractors for Non-Autonomous Stochastic Plate Equations with Multiplicative Noise and Nonlinear Damping

Based on the existence of pullback attractors for the non-autonomous stochastic plate equations with multiplicative noise and nonlinear damping defined in the entire space $\mathbb{R}^n$ by Xiaobin Yao in \cite{Yao4}, in the paper, we further investigate the upper semicontinuity of pullback attractors for the problem.     

Studies on the syntheses of polymetalloxanes and their properties as a precursor for amorphous oxide. IV. Properties of SiO2–TiO2 oxide fibers from polytitanosiloxane

From polytitanosiloxanes (PTS), SiO₂–TiO₂ oxide fibers with fairly good tensile strength were prepared, and their mechanical and thermal properties were investigated. The precursor fibers PTS-0.5 and PTS-1.0 were obtained by dry spinning of a highly viscous PTS solution which were formed as the reaction mixture of silicic acid (SA) with bis(2,4-pentanedionato)titanium diisopropoxide (PTP) in the molar ratios (SA/PTP) of 0.5 and 1.0. The precursor fibers PTS-0.5 were too brittle to measure their tensile strength, whereas PTS-1.0 and the heat-treated fibers were found to have tensile strength of 130 (precursor), 540 (500°C), and 450 (900°C) MPa, respectively. Heat-treatment of the fibers PTS-1.0 at above 1000°C forms anatase and rutile of titanium dioxide. The crystallization is resulted from the unreacted PTP which is not incorporated into the polymer network.     

Fabrication of thermo-responsive polymer nanocomposites for smart window applications

Abstract

Thermo-responsive polymers have attracted much attention in recent years because they can provide a variety of applications for smart devices, but the lack of sufficient mechanical properties and late response rate of the polymers limit their applications. In the current work, we fabricated polymer nanocomposites made from poly(vinyl methyl ether) and nanofillers with photothermal conversion property such as graphene oxide, antimony tin oxide nanoparticles, and silver nanoplates. The prepared nanocomposites showed rapidly reversible and reliable transparent-opaque transitions during the repeated heating and cooling processes, suggesting that they can be applied to smart window applications.