共振光散射法研究脱氧核糖核酸与多胺的相互作用及精胺的测定

在一定条件下,精胺不仅能够与脱氧核糖核酸(DNA)大沟嵌入结合,还能与DNA链上的碱基和磷酸基进行链内结合和跨链结合,形成致密的环状螺旋结构,造成DNA的凝聚,从而使DNA共振光散射(RLS)强度强烈地增强。增强的共振光散射强度与精胺的浓度呈现良好的线性关系,线性范围为5.0×10-7~1.0×10-5mol/L;校正曲线的回归方程为IRLS=40.22 5.28×107C(mol/L),相关系数r=0.9936;检出限(3σ)为7.4×10-8mol/L。在测定精胺的线性范围内,其它多胺(亚精胺,腐胺)、蛋白质及常见的金属离子不干扰测定。该方法用于测定新几内亚凤仙中的精胺,获得满意结果。     

迁移管的电场强度对真空紫外电离-离子迁移谱仪性能的影响

离子迁移管是离子迁移谱仪的核心部分,它用来产生均匀的电场,以使不同迁移率的离子进行分离。本研究以丙酮为例,详细研究了本课题组所研制的真空紫外电离源-离子迁移谱仪中迁移管的电场参数对离子的灵敏度和分辨率的影响,发现电压的增大灵敏度增大,但是分辨率存在一个最佳的电压,这些结果可用于迁移谱的优化设计。     

生晒参、全须生晒参中19种有机氯残留农药的毛细管气相色谱测定

建立了生晒参、全须生晒参中19种有机氯农药残留的毛细管气相色谱分析方法。对样品中六六六的4种异构体、滴滴涕的5种异构体、四氯苯胺、六氯苯、五氯硝基苯、七氯、五氯苯胺、艾氏剂、百菌清、环氧七氯、狄氏剂及异狄氏剂共19种有机氯农药的残留量进行了测定。以石油醚-丙酮混合物作为提取剂,样品采用索氏提取,提取液用弗罗里硅土柱层析净化。采用OV-1701石英毛细管气相色谱柱分离样品,ECD检测器进行检测。在3个水平添加时的回收率(n=5)分别为75.7%~96.1%、78.8%~111.6%和81.7%~115·2%;相对标准偏差分别为2.4%~10.6%、2.1%~9.8%和1.4~10.0%。方法用于生晒参和全须生晒参样品中农药残留的测定,结果满意。     

漂移管工作温度对离子迁移率谱的影响

离子迁移率、反应物离子的种类和产量与漂移管工作温度有很大的关系。本研究在不同温度下进行了离子迁移率实验,结果表明,离子迁移率随温度的升高而增大,而提高工作温度可以减少水分子对产物离子的影响,有利于改善系统检测的分辨率;选择合适漂移管工作温度,能有效地增加反应物离子的产量,从而提高系统检测的灵敏度和选择性。     

考马斯亮蓝-SLS体系共振瑞利散射法测定蛋白质

研究了考马斯亮蓝与蛋白质的结合反应。在十二烷基磺酸钠的存在下,于pH1.6的酸性介质中,蛋白质与考马斯亮蓝可形成复合物,使最大波长351 nm的共振光散射光谱得到加强,据此,用于蛋白质的定量测定。十二烷基磺酸钠的加入,可使灵敏度提高3.2倍。本法测定牛血清白蛋白、人血清白蛋白、卵蛋白、γ-球蛋白的线性范围分别为:0.04~0.8、0.03~0.5、0.04~1.00、.06~1.2 mg/L,检出限分别为:6.3、4.7、7.9、9.2μg/L。已用于人血清、牛奶、豆浆、尿液中蛋白质的测定,所得结果与经典的考马斯亮蓝法一致。     

聚醋酸乙烯酯的光引发可控合成——介绍一个高分子化学综合实验

本实验开展了醋酸乙烯酯的可逆加成-断裂链转移自由基聚合(RAFT),分别运用偶氮二异丁腈(AIBN)引发和可见光引发两种方式进行了聚合反应,运用核磁共振和凝胶色谱等多种手段对所得聚合物结构进行了表征与分析。通过比较AIBN引发与光引发所获得聚合物端基结构的异同,加深了学生对RAFT聚合方法原理的理解。同时,运用该方法实现了聚合物两端端基结构的高度功能化,深入体会聚合物合成设计概念。本综合实验教学不仅通过对比法加深了学生对实验原理和专业知识的理解,提升了学生创新研究能力,而且训练了学生的实验操作技能、大型仪器使用能力和结果分析能力,提升了综合素质。     

Cu2+改性g-C3N4光催化剂的光催化性能

Photocatalytic technology can effectively solve the problem of increasingly serious water pollution, the core of which is the design and synthesis of highly efficient photocatalytic materials. Semiconductor photocatalysts are currently the most widely used photocatalysts. Among these is graphitic carbon nitride (g-C₃N₄), which has great potential in environment management and the development of new energy owing to its low cost, easy availability, unique band structure, and good thermal stability. However, the photocatalytic activity of g-C₃N₄ remains low because of problems such as wide bandgap, weakly absorb visible light, and the high recombination rate of photogenerated carriers. Among various modification strategies, doping modification is an effective and simple method used to improve the photocatalytic performance of materials. In this work, Cu/g-C₃N₄ photocatalysts were successfully prepared by incorporating Cu²⁺ into g-C₃N₄ to further optimize photocatalytic performance. At the same time, the structure, morphology, and optical and photoelectric properties of Cu/g-C₃N₄ photocatalysts were analyzed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy, UV-Vis diffuse reflectance spectroscopy (DRS), and photoelectric tests. XRD and XPS were used to ensure that the prepared photocatalysts were Cu/g-C₃N₄ and the valence state of Cu was in the form of Cu²⁺. Under visible light irradiation, the photocatalytic activity of Cu/g-C₃N₄ and pure g-C₃N₄ photocatalysts were investigated in terms of the degradation of RhB and CIP by comparing the amount of introduced copper ions. The experimental results showed that the degradation ability of Cu/g-C₃N₄ photocatalysts was stronger than that of pure g-C₃N₄. The N₂ adsorption-desorption isotherms of g-C₃N₄ and Cu/g-C₃N₄ demonstrated that the introduction of copper had little effect on the microstructure of g-C₃N₄. The small difference in specific surface area indicates that the enhanced photocatalytic activity may be attributed to the effective separation of photogenerated carriers. Therefore, the enhanced photocatalytic degradation of RhB and CIP over Cu/g-C₃N₄ may be due to the reduction of carrier recombination rate by copper. The photoelectric test showed that the incorporation of Cu²⁺ into g-C₃N₄ could reduce the electron-hole recombination rate of g-C₃N₄ and accelerate the separation of electron-hole pairs, thus enhancing the photocatalytic activity of Cu/g-C₃N₄. Free radical trapping experiments and electron spin resonance indicated that the synergistic effect of superoxide radicals (O₂^•−), hydroxyl radicals (•OH) and holes could increase the photocatalytic activity of Cu/g-C₃N₄ materials.     

部分还原二氧化钛的NMR和EPR研究

Partially reduced TiO₂ nanomaterials have attracted significant interest because of their visible-light activity for catalysis and photodegradation. Herein, we prepared a partially reduced anatase TiO₂ (Re-A-TiO₂) nanoparticle material using a fast combustion method, demonstrating good activity toward decomposing methyl orange under visible light irradiation. The surface structure of the prepared material, after being surface-selectively ¹⁷O-labeled with H₂¹⁷O (¹⁷O-enriched water), was studied via ¹⁷O and ¹H solid-state magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy and electron paramagnetic resonance (EPR) spectroscopy, and the obtained results were compared to those of non-reduced anatase TiO₂ (A-TiO₂). The EPR results showed that the concentrations of paramagnetic species (i.e., oxygen vacancies (OV) and Ti³⁺) in Re-A-TiO₂ were much higher than that in A-TiO₂, while the former was associated with a higher OV/Ti³⁺ ratio. The intensities of the EPR signals were significantly affected by the adsorbed water, and this phenomenon was explored in combination with ¹H NMR spectroscopy. The ¹H species on Re-A-TiO₂ appeared at larger chemical shifts, denoting the increased acidity of the sample, and these ¹H species on Re-A-TiO₂ were more difficult to remove than those on A-TiO₂. On the other hand, different features were observed for the signals arising from the two-coordinated oxygen atoms (μ₂-O) in ¹⁷O NMR, suggesting a typical anatase TiO₂(101) surface on A-TiO₂, but a more complex surface environment for Re-A-TiO₂. Furthermore, a larger amount of hydroxyl groups (OH) were observed on Re-A-TiO₂ compared to that on A-TiO₂, indicating a larger proportion of exposed (001) facets on Re-A-TiO₂. However, the μ₂-O signals broadened and became similar when the drying temperature was increased to 100 ℃, indicating a non-faceted anatase TiO₂ surface in such conditions. Based on the EPR and NMR results, a significant fraction of the OH species is believed to be formed from the reaction of the paramagnetic centers and adsorbed water molecules. The ¹H→¹⁷O cross polarization (CP) MAS and two-dimensional heteronuclear correlation (2D HETCOR) NMR spectra were used to verify the spatial proximity of the hydrogen and oxygen species, confirming the spectral assignments of a strongly adsorbed water and one type of surface OH species. In particular, the ¹H NMR signals at approximately 11 ppm were ascribed to the hydrogen species in the intramolecular hydrogen bond. In summary, this study investigated the paramagnetic species and surface structure of anatase TiO₂ materials by combining EPR along with ¹H and ¹⁷O solid-state NMR spectroscopy. The differences in the surface structures of Re-A-TiO₂ and A-TiO₂ should be closely related to their different properties toward the photodegradation of methyl orange.     

基于S-型光催化机制CuInS2内嵌中空凹面氮化碳光催化分解H2O制H2（英文）

光催化解离H2O合成H2是绿色可再生的太阳能光子能量转换策略之一.目前,增强光催化材料对太阳能光子的捕获并将之有效利用仍然是一个具有挑战性的课题.光催化解离H2O反应包括三个过程:太阳能光子能量促使光生电子在半导体材料带隙中的跃迁;光生电子定向传输;光生电子与吸附在半导体材料表面的H2O分子发生反应.第一过程需要强的太阳光子捕获能力以产生足够的光生载流子;第二、三过程在动力学上反映了光生载流子在各个竞争过程中能否有效利用的问题,如光生电子迁移与H2O作用的速度很慢(~μs),而电子与空穴的复合速度快(~ps).目前研究者很难协调半导体材料的电学和光学特性以满足光生载流子在热力学和动力学两方面的要求.g-C3N4是由C、N原子通过sp2杂化组成的二维π共轭体系.当g-C3N4结构偏离二维平面时,共轭体系的π电子由凹面迁移到凸面,促使凹、凸面形成表观电势差,有利于电子的定向传输.本文通过卷曲sp2杂化离域均三嗪体系偏离二维平面,得到空心凹面g-C3N4结构,便捷地优化了半导体的电子结构.将CuInS2嵌入生长于空心g-C3N4的凹面,所构成的半导体光催化材料CuInS2@C3N4展现了增强的光捕获能力,以及电子定向传输转移能力.结合XPS、光电流测试、电化学阻抗谱、稳态及瞬态荧光等表征手段揭示空心g-C3N4凹、凸面表观电势差驱动光生电子以S-型光催化作用机制从CuInS2的Cu 2p向g-C3N4的N 1s的路径转移.因而,所构建的CuInS2@C3N4在可见光激发下产氢效率提高到373μmol·h^?1·g^?1,其产氢效率分别是二维平面g-C3N4负载1 wt%Pt和3 wt%Pd效率的1.57倍和1.35倍,表明空心g-C3N4凹、凸面电势差可以显著地促进光生电子分离和利用率,从而提高光催化解离水制氢效率.本文可增强g-C3N4的可持续太阳能转换性能,也适用于其他半导体材料以替代贵金属光催化体系,降低光催化产氢技术成本,促进光催化技术的应用.     

石墨相氮化碳可见光下活化过一硫酸盐氧化降解光惰性邻苯二甲酸二甲酯的机理研究（英文）

近几年过一硫酸盐(PMS)活化技术备受关注,其中利用太阳能活化PMS具有可持续和环保的优势,但PMS本身不吸收可见光.因此,本文提出利用具有可见光响应的石墨相氮化碳(g-C3N4)激发产生光电子进而活化PMS.首先利用三聚氰胺前驱体通过热缩聚法制备g-C3N4,通过X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、紫外-可见光漫反射(UV-Vis)、荧光光谱(PL)、透射电镜(TEM)、N2吸附脱附测试(BET)、电化学等一系列方法对g-C3N4进行表征,研究其表面性质及光学性能.结果显示, g-C3N4具有典型的片层结构和可见光活性,禁带宽度为2.7 e V.本文选取光惰性的内分泌干扰物邻苯二甲酸二甲酯(DMP)为目标污染物,系统地研究了其降解动力学和降解机理.研究发现,在短波紫外光(254和300nm)照射下,直接光解和·OH参与的反应机理能实现DMP的光降解,而在可见光照射下g-C3N4介导的光催化过程不能使DMP分解;但当添加PMS时,体系主导自由基由·O2–转化为SO4·–和·OH,从而实现DMP的有效降解和矿化.研究还发现,高浓度的PMS和高剂量的g-C3N4均可以提高PMS的活化量和相应的DMP降解效率,但提高催化剂剂量的方式能更充分的利用PMS.尽管高浓度的DMP阻碍了PMS和光催化剂g-C3N4的有效接触,但可以提高PMS的利用率.当p H低于零电荷点(5.4)时, DMP的降解效率较高.此外,使用两种淬灭剂(乙醇和叔丁醇)与DMP进行竞争性实验,结合电子自旋共振检测,表明SO4·–和·OH都是体系主要的自由基.此外,还对g-C3N4的可持续性能进行考察,四次循环实验结果显示,该催化剂具有良好的可重复利用性.对DMP降解进行总有机碳测定,发现降低了19%.最后,利用液相色谱质谱联用对DMP降解产物进行定性定量分析,发现DMP主要通过SO4·–和·OH对苯环的攻击以及脂肪族链的氧化断键这两种途径进行降解.综上可见,利用可见光激发g-C3N4产生的光电子能有效活化PMS降解顽固型有机污染物,可为实现太阳能活化PMS技术提供有力的技术参考.