基于相关分析的LED路灯光强分布测试步距角优化研究

优化LED路灯光强分布测试系统的测试步距角可以较大程度地提高LED路灯测试的效率。选择不同的测试步距角对LED路灯的光强分布进行测试,将1°测试步距角所测得的路灯光强分布视为真值,采用相关分析的方法研究在较大步距角下所测得的路灯光强分布与真值之间的近似程度。研究结果显示,当相关系数要求在98%左右时,可以选择15°测试步距角对LED路灯的光强分布进行测试,相对于真值测试,在此步距下LED路灯的测试时间减少了98%以上,极大地提高了测试效率。     

流动注射-电化学-表面等离子体激元共振联用技术研究二茂铁硫醇氧化还原结构变化

采用流动注射-电化学-表面等离子体激元共振联用技术研究了11-二茂铁基十一烷基-1-硫醇自组装膜在氧化还原过程中的构型变化.结果表明,二茂铁硫醇在氧化过程中,分子发生了两种结构变化:远离电极表面,烷基链与电极表面的夹角增大;分子上两个平行的戊基环绕着二茂铁-碳轴发生旋转.     

Contact angle hysteresis

In thermodynamic equilibrium, the contact angle is related by Young's equation to the interfacial energies. Unfortunately, it is practically impossible to measure the equilibrium contact angle. When for example placing a drop on a surface its contact angle can assume any value between the advancing Θ_a and receding Θ_r contact angles, depending on how the drop is placed. Θ_a − Θ_r is called contact angle hysteresis. Contact angle hysteresis is essential for our daily life because it provides friction to drops. Many applications, such as coating, painting, flotation, would not be possible without contact angle hysteresis. Contact angle hysteresis is caused by the nanoscopic structure of the surfaces. Here, we review our current understanding of contact angle hysteresis with a focus on water as the liquid. We describe appropriate methods to measure it, discuss the causes of contact angle hysteresis, and describe the preparation of surfaces with low contact angle hysteresis.     

Effect of Artabotrys odoratissimus extract as an environmentally sustainable inhibitor for mild steel corrosion in 0.5 M H2SO4 media

Artabotrys odoratissimus inhibitory effect on mild steel (MS) corrosion in 0.5 M H₂SO₄ solution has been assessed utilizing mass loss, electrochemical potentiodynamic polarization, and impedance spectroscopy techniques. The Artabotrys odoratissimus plant has a wide range of bioactive compounds. Phytochemicals were tested for ethanolic Artabotrys odoratissimus leaves extract (AOLE) using the FeCl₃ test, Salkowaski's test, and others. Corrosion tests were conducted at varying inhibitor concentrations and temperatures. The inhibitory impact of AOLE on corrosion of MS was reported to improve with increasing concentration. Polarization experiments revealed that AOLE is a mixed kind of inhibitor and the inhibition efficacy (η_w) for MS is 93.27% for 1.25 g/L AOLE. For Electrochemical impedance spectroscopy (EIS), maximal inhibitory efficacy (η_w) was 91.62% due to AOLE adsorption on the MS surface. The obtained results using each methodology are highly consistent and closely resemble each other. The adsorption of AOLE molecules on an MS surface from the bulk of the solution causes the inhibitor's inhibition action, and the adsorption mechanism follows Langmuir adsorption isotherm. The computed $\Delta G_{ads}^o$ values ranged between ?32.919 and ?33.520 kJ mol^?1, implying a spontaneous and exothermic inhibitory action. The thermodynamic and activation parameters are often used to understand corrosion inhibition mechanisms. The comparison of corrosion product and pure extract FT-IR spectrum indicates the nature of AOLE adsorption on the MS surface. The surface morphology of MS samples was assessed using atomic force microscopy (AFM), scanning electron microscope (SEM), and contact angle techniques.     

Study of metal containing hydrogenated carbon films by STM/AFM and SAXS

Metal-containing amorphous hydrogenated carbon films are of high interest for industrial applications because of their excellent frictional properties, their high abrasive wear resistance and their electrical conductivity, which can be adjusted in a range of 10–12 orders of magnitude. In order to get insight into the mechanical and electrical properties it is necessary to study the nanostructure of the films. The structure consists of small nanometer sized metallic or carbidic particles, which are embedded in a three dimensional amorphous hydrogen-carbon matrix. Anomalous small angle X-ray scattering (ASAXS) and scanning tunneling microscopy (STM) have been used to determine size- and distance-distributions of the particles as a function of metal content. Problems and restrictions of both methods will be discussed. Furthermore the capabilities of scanning probe techniques to distinguish different materials on a nanometer scale (material contrast) have been studied employing barrier height imaging (dI/dz) and friction force microscopy.Dedicated to Professor Dr. rer. nat. Dr. h. c. Hubertus Nickel on the occasion of his 65th birthday     

Recent progress in experiments for sessile droplet wetting on structured surfaces

Wetting of a sessile droplet on structured or patterned surface can be found in a broad range of applications. The researchers have been promoted to keep working on the topic. The review is on the basis of the recent experimental advances on the sessile droplet wetting on the hydrophobic, hydrophilic, or combined hydrophobic and hydrophilic surfaces under isothermal conditions, and on heating or cooling substrates having nonisothermal conditions. More attention has been paid on the wetting configuration between the sessile droplet and the structured substrate; the research gap has been discussed on identifying the three-phase line shape. Further, the three-dimensional measurement for the sessile droplets on the patterned surfaces with focusing more on the contact line of sessile droplets might reveal new physical insights. This review targets at building a holistic overview on the sessile droplet wetting behaviors on the structured substrate in the past 2 years.     

Inclined Substrate Deposition of Nanostructured TiO2 Thin Films for DSSC Application

Nanostructured TiO₂ films were deposited onto Indium Tin Oxide (ITO) and glass substrates by dc reactive magnetron sputtering at different substrate inclination angles. The structural and optical properties of the deposited films were studied by X-ray diffraction, scanning electron microscopy and UV–Vis spectrophotometer, respectively. Dye-sensitized solar cells (DSSC) were assembled using these TiO₂ films as photoelectrodes and the effect of the substrate inclination angle in the preparing process of TiO₂ films on the DSSC conversion efficiency was studied.     

Polarized SERS Controlled by Anisotropic Growth on Ordered Curvature Substrate

Colloidal lithography is an efficient and low-cost method to prepare an ordered nanostructure array with new shapes and properties. In this study, square-shaped and cone-shaped Au nanostructures were obtained by 70° angle deposition onto polystyrene bead array with the diameter of 500 nm when a space of 120 nm is created between the neighbor beads by plasma etching. The gaps between the units decrease when the Au deposition time increases, which leads to the polarized enhanced local field, in agreement with the surface-enhanced Raman scattering spectra (SERS) observations and finite-difference time-domain (FDTD) simulations. When the Au deposition time increased to 5 min, 5 nm gaps form between the neighbor units, which gave an enhancement factor of 5 × 10⁹. The SERS chip was decorated for the detection of the liver cancer cell marker Alpha-fetoprotein (AFP) with the detection limit down to 5 pg/mL.     

Measuring Contact Angles at Copper Electrodes

Potential dependences of the angle of contact between perfluorodecaline C₁₀F₁₈ and copper, copper(I) sulfide, and copper telluride Cu₄Te₃ in 0.1 M CH₃COONa are measured. The data are in good agreement with the metal hardness measured in 1 M KOH. The uncharged-surface potentials (USP) for copper, copper(I) sulfide, and copper telluride equal 0.05–0.07, –0.02 to –0.04, and 0.05–0.07 V (NHE) in 0.1 M CH₃COONa. Studying the effect of Br^– ions shows that USP for copper and Cu₂S shift in, respectively, the negative and positive directions with an increase in [Br^–]. For copper telluride, USP shifts in the positive direction at low Br^– concentrations, and at NaBr concentrations in excess of 0.04 M, in the negative direction.