火焰原子吸收光谱法测定茶叶中的锰

介绍悬浮液进样-次灵敏线火焰原子吸收光谱法测定茶叶中的锰的方法。以琼脂为悬浮剂，将茶叶样品均匀、稳定地悬浮于琼脂溶胶中，直接喷入空气-乙炔火焰中，利用锰280.1nm次灵敏线，以工作曲线或标准加入法测定锰的含量，方法简便、快速，用于测定茶叶和桃叶样品中的锰，结果准确。     

双波长分光光度法测定湿法炼锌净化液中的痕量锗

选择水杨基荧光酮－乳化剂ＯＰ－盐酸为显色体系，应用双波长分光光度法扣除硫酸锌的基体干扰，不分离直接测定了湿法炼锌过程中硫酸锌净化液中的痕量锗。测定范围在０－４０ｍｇ／Ｌ。本法应用于株洲冶炼厂锌净化液中锗的测定，结果与该厂长期的萃取－比色法结果相吻合，而测定速度较萃取－比色法至少提高了一倍。     

Enhancement of signal-to-noise level by synchronized dual wavelength modulation for light emitting diode fluorimetry in a liquid-core-waveguide microfluidic capillary electrophoresis system

The signal-to-noise level of light emitting diode (LED) fluorimetry using a liquid-core-waveguide (LCW)-based microfluidic capillary electrophoresis system was significantly enhanced using a synchronized dual wavelength modulation (SDWM) approach. A blue LED was used as excitation source and a red LED as reference source for background-noise compensation in a microfluidic capillary electrophoresis (CE) system. A Teflon AF-coated silica capillary served as both the separation channel and LCW for light transfer, and blue and red LEDs were used as excitation and reference sources, respectively, both radially illuminating the detection point of the separation channel. The two LEDs were synchronously modulated at the same frequency, but with 180°-phase shift, alternatingly driven by a same constant current source. The LCW transferred the fluorescence emission, as well as the excitation and reference lights that strayed through the optical system to a photomultiplier tube; a lock-in amplifier demodulated the combined signal, significantly reducing its noise level. To test the system, fluorescein isothiocyanate (FITC)-labeled amino acids were separated by capillary electrophoresis and detected by SDWM and single wavelength modulation, respectively. Five-fold improvement in S/N ratio was achieved by dual wavelength modulation, compared with single wavelength modulation; and over 100-fold improvement in S/N ratio was achieved compared with a similar LCW-CE system reported previously using non-modulated LED excitation. A detection limit (S/N = 3) of 10 nM FITC-labeled arginine was obtained in this work. The effects of modulation frequency on S/N level and on the rejection of noise caused by LED-driver current and detector were also studied.     

光分组交换中的波长变换器配置研究

首先对波长变换器的功能及分类进行详细的论述,然后,对波长变换器的配置进行分析,总结出两种波长变换器配置方法,即独占式配置方法和共享式配置方法.针对独占式配置方法,本文使用仿真实验的方法研究了在不同类型的波长变换器下交换节点丢包性能的差异.本文还对独占式配置方法和共享式配置方法进行对比研究.     

一种用于波长路由光网络的分布式快速波长预留协议

波长预留协议用于在光通道建立过程中预留和配置波长.目前已有的波长预留协议都把协议设计的目标定为降低网络阻塞率,没有一种协议设计把目标定为缩短光通道的建立时间和简化协议处理过程.然而更短的建立时间和更小的协议复杂度对于未来极其动态的光网络却是非常重要的.提出了一种新颖的用于波长路由光网络的分布式快速波长预留协议-目的端预留协议,它在保证网络阻塞率可以接受的前提下,不仅可以降低连接建立时间,还可以减少控制节点处理器需要处理的信令消息数量.仿真结果证明了这一点.     

高斯光束经波长级圆孔衍射的轴上光强特性

基于横截面上精确表述的光强和精确的衍射场公式 ,对高斯光束经波长级圆孔衍射的轴上光强特性进行了研究。结果表明 ,高斯衍射光束的轴上光强特性取决于初始高斯半宽度w0 和波长级圆孔的孔径R。对于w0 /R≥ 1的高斯衍射光束 ,轴上光强存在的极值个数和出现的位置仅由比值m=2R/λ决定 ,最大的轴上光强均出现在N =R2 / (λz) =1的地方 ;至于轴上光强极值的峰和谷明显与否 ,取决于w0 /R的比值 ,比值越大 ,轴上光强极值的峰和谷就越明显。当w0 /R的比值足够大时 ,就趋向于平面波入射时的情形。而对于w0 /R<1的这一类高斯衍射光束 ,轴上光强存在特定的演化规律 :随着初始高斯半宽度的减小 ,轴上光强极值个数逐步减少直至全部消失。     

Electric field‐induced birefringence,optical rotatory power and conoscopic measurements of a chiral antiferroelectric smectic liquid crystal

Using a photoelastic modulator‐based novel set‐up, the electric field‐induced in‐plane birefringence and the optical rotatory power (ORP) were measured of an antiferroelectric liquid crystalline compound (12OF1M7) in its various phases using 30 µm homeotropic cells. Some specific signatures of the in‐plane birefringence and of the ORP for the various phases are being established. A relatively small threshold field is needed for the unwinding process of the antiferroelectric phase with a unit cell of four layers [SmC_A*(1/2)] compared with that for two layers [SmC_A*(0)]. On application of the electric field on the high temperature side of the SmC_A*(1/2) phase (80.1–81.5°C), a field‐induced phase transition is shown to occur directly to the SmC* phase, whereas on the lower temperature side (79.4–80.1°C) the transition takes place to SmC* via the SmC_A*(1/3) phase. The in‐plane birefringence exhibits a critical power law dependence for the SmC*–SmA transition. The ORP changes sign within the temperature range of the phase with a unit cell of three layers, reflecting a change in the handedness during this phase. Using tilted conoscopy, the results for the biaxiality and the apparent tilt angle for a smectic liquid crystal with a tilt angle greater than 18° in the ferroelectric phase are reported. The biaxiality implies the difference in the refractive indices between the two minor axes of the refractive index ellipsoid. The optical transmittance at visible and IR wavelengths for free‐standing films reveal characteristic reflection bands for these phases. The modulated structures of the reflected bands appear just above the SmC_A* phase and below SmC_A*(1/3); these are possibly due to an easy deformation of the phase by the surfaces.     

Breakdown Pattern of Hydrocarbons by Laser Breakdown Time-of-flight Mass Spectrometry

The laser breakdown time-of-flight mass spectrometry was developed and applied to detect the breakdown patterns of hydrocarbons that are significant to improve the detectability of heavy metals compounded in various mixtures such as particles and hydrocarbons. The laser wavelength dependence of this method was evaluated using 1064, 532, and 266 nm laser outputs. Breakdown processes using 1064 and 532 nm outputs showed less interference of fragmentation for the detection of various heavy metals. The method was applied to various hydrocarbons and it showed the possibility of categorization of hydrocarbon groups using the pattern of breakdown products.     

Birefringence control by hydrogen bonding on compatible polymer pair composed of hydrogenated ring‐opening polymer and modified polystyrene

A new polymer blend composed of a hydrogenated ring‐opening polymer (HROP) with an ester group and hydroxyl functionalized polystyrene (HFP) produced the excellent transparent materials which enabled a precise birefringence control in keeping with the other physical properties for optical film use. The blend with a composition from 0.28 to 0.35 for the HFP weight fraction showed an extraordinary wavelength dispersion, transmitting through a zero birefringence point at the critical fraction of 0.45, while each polymer showed an ordinary wavelength dispersion. The observed excellent transparency even above those of the glass transition temperature was attributed to a depressed phase separation that resulted from strong hydrogen bond between the ester and hydroxyl groups. An IR analysis of the film demonstrated a remarkable red‐shift in the carbonyl peak with an increase of the hydroxylated polystyrene content, indicating a strong hydrogen bond between those groups. This new polymer blend provides a useful design to achieve practical demands for film use, both optical and mechanical under the fabrication conditions using the melt extrusion technique. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3132–3143