一种用于波长路由光网络的分布式快速波长预留协议

波长预留协议用于在光通道建立过程中预留和配置波长.目前已有的波长预留协议都把协议设计的目标定为降低网络阻塞率,没有一种协议设计把目标定为缩短光通道的建立时间和简化协议处理过程.然而更短的建立时间和更小的协议复杂度对于未来极其动态的光网络却是非常重要的.提出了一种新颖的用于波长路由光网络的分布式快速波长预留协议-目的端预留协议,它在保证网络阻塞率可以接受的前提下,不仅可以降低连接建立时间,还可以减少控制节点处理器需要处理的信令消息数量.仿真结果证明了这一点.     

高斯光束经波长级圆孔衍射的轴上光强特性

基于横截面上精确表述的光强和精确的衍射场公式 ,对高斯光束经波长级圆孔衍射的轴上光强特性进行了研究。结果表明 ,高斯衍射光束的轴上光强特性取决于初始高斯半宽度w0 和波长级圆孔的孔径R。对于w0 /R≥ 1的高斯衍射光束 ,轴上光强存在的极值个数和出现的位置仅由比值m=2R/λ决定 ,最大的轴上光强均出现在N =R2 / (λz) =1的地方 ;至于轴上光强极值的峰和谷明显与否 ,取决于w0 /R的比值 ,比值越大 ,轴上光强极值的峰和谷就越明显。当w0 /R的比值足够大时 ,就趋向于平面波入射时的情形。而对于w0 /R<1的这一类高斯衍射光束 ,轴上光强存在特定的演化规律 :随着初始高斯半宽度的减小 ,轴上光强极值个数逐步减少直至全部消失。     

Electric field‐induced birefringence,optical rotatory power and conoscopic measurements of a chiral antiferroelectric smectic liquid crystal

Using a photoelastic modulator‐based novel set‐up, the electric field‐induced in‐plane birefringence and the optical rotatory power (ORP) were measured of an antiferroelectric liquid crystalline compound (12OF1M7) in its various phases using 30 µm homeotropic cells. Some specific signatures of the in‐plane birefringence and of the ORP for the various phases are being established. A relatively small threshold field is needed for the unwinding process of the antiferroelectric phase with a unit cell of four layers [SmC_A*(1/2)] compared with that for two layers [SmC_A*(0)]. On application of the electric field on the high temperature side of the SmC_A*(1/2) phase (80.1–81.5°C), a field‐induced phase transition is shown to occur directly to the SmC* phase, whereas on the lower temperature side (79.4–80.1°C) the transition takes place to SmC* via the SmC_A*(1/3) phase. The in‐plane birefringence exhibits a critical power law dependence for the SmC*–SmA transition. The ORP changes sign within the temperature range of the phase with a unit cell of three layers, reflecting a change in the handedness during this phase. Using tilted conoscopy, the results for the biaxiality and the apparent tilt angle for a smectic liquid crystal with a tilt angle greater than 18° in the ferroelectric phase are reported. The biaxiality implies the difference in the refractive indices between the two minor axes of the refractive index ellipsoid. The optical transmittance at visible and IR wavelengths for free‐standing films reveal characteristic reflection bands for these phases. The modulated structures of the reflected bands appear just above the SmC_A* phase and below SmC_A*(1/3); these are possibly due to an easy deformation of the phase by the surfaces.     

Breakdown Pattern of Hydrocarbons by Laser Breakdown Time-of-flight Mass Spectrometry

The laser breakdown time-of-flight mass spectrometry was developed and applied to detect the breakdown patterns of hydrocarbons that are significant to improve the detectability of heavy metals compounded in various mixtures such as particles and hydrocarbons. The laser wavelength dependence of this method was evaluated using 1064, 532, and 266 nm laser outputs. Breakdown processes using 1064 and 532 nm outputs showed less interference of fragmentation for the detection of various heavy metals. The method was applied to various hydrocarbons and it showed the possibility of categorization of hydrocarbon groups using the pattern of breakdown products.     

Birefringence control by hydrogen bonding on compatible polymer pair composed of hydrogenated ring‐opening polymer and modified polystyrene

A new polymer blend composed of a hydrogenated ring‐opening polymer (HROP) with an ester group and hydroxyl functionalized polystyrene (HFP) produced the excellent transparent materials which enabled a precise birefringence control in keeping with the other physical properties for optical film use. The blend with a composition from 0.28 to 0.35 for the HFP weight fraction showed an extraordinary wavelength dispersion, transmitting through a zero birefringence point at the critical fraction of 0.45, while each polymer showed an ordinary wavelength dispersion. The observed excellent transparency even above those of the glass transition temperature was attributed to a depressed phase separation that resulted from strong hydrogen bond between the ester and hydroxyl groups. An IR analysis of the film demonstrated a remarkable red‐shift in the carbonyl peak with an increase of the hydroxylated polystyrene content, indicating a strong hydrogen bond between those groups. This new polymer blend provides a useful design to achieve practical demands for film use, both optical and mechanical under the fabrication conditions using the melt extrusion technique. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3132–3143     

Combined Path and Maximum Empty Static Routing Algorithms with Wavelength Assignment for Future Transport Networks

Abstract

In this article, two static routing algorithms have been proposed and compared to some of the existing algorithms on the basis of blocking probability. The two proposed static routing and wavelength assignment algorithms reduce the blocking probability to maximize the utilization of the network. All of these algorithms are analyzed and compared with four wavelength assignment schemes, which are first-fit, random, most used, and least used. It is shown that our proposed static algorithms give the best performance for first-fit wavelength assignment and most used wavelength assignment strategies with reduced complexity. For least used wavelength assignment and random wavelength assignment, 1 fixed and 2 alternate routing algorithm gives the lowest blocking probability.     

级联光栅结合Sagnac环的可调谐光纤激光器

提出并验证了一种单-双波长可调谐掺铒光纤激光器。利用级联光纤布拉格光栅(Cascaded Fiber Bragg gratings,Cascaded FBGs)结合Sagnac环结构所产生的复合滤波效应,实现较高精细度滤波,并通过调节环内偏振控制器(Polarization Controller,PC),引入双折射效应,得到波长可调谐的光纤激光器。基于耦合模理论并使用传输矩阵法对该结构的传输特性进行了分析,在此基础上搭建实验系统,验证了理论分析的正确性。实验结果表明:通过调节PC,激光器输出激光的波长范围约为1 555.644～1 556.112 nm,双波长间隔的可调范围约为0.108～0.452 nm,单-双波长的边模抑制比(SMSR)均高于40 dB;在稳定性测试中,输出单-双波长激光的波长最大漂移量小于0.008 nm。该方法具有结构简单、调谐方便、易于实现且精细度较高的优点,可应用于密集波分复用及全光通信系统等领域。     

新时期漳州广电网络1550nm传输设计方案

介绍了漳州广电网络1 550 nm传输设计方案,包括组网方式和直调1 550 nm光发射机的选型等,阐述了双重保护的概念。就怎样选择EDFA的输出光功率发表了自己的一些看法。     

Tunable dual-wavelength ring fiber laser with stable output based on saturable absorber and thin core passive fiber

A dual-wavelength erbium-doped ring fiber laser is proposed and experimentally demonstrated though a detailed theoretical analysis and experimental verification. The proposed dual-wavelength erbium-doped fiber (EDF) laser, which is based on a ring fiber laser structure, is fabricated using two fiber Bragg gratings. By adjusting the gains and losses of the fiber laser structure, the laser can be switched between single- and double-wavelength modes. A saturable absorber (SA) is used to improve the output laser stability, which is further enhanced by splicing a thin core passive fiber (TCPF) into the laser cavity to produce a Mach–Zehnder filter effect. Optimizing the lengths of the SA and TCPF results in the adoption of a 1-m EDF and a 4-m passive fiber. On the basis of these enhancements and optimizations, a fiber laser with stable output is constructed that incurs single- or dual-wavelength laser shifts of less than 3 pm at room temperature over a period of 250 s.     

基于内置光栅的大功率激光二极管

研制了一种用作光纤激光器泵浦光源内置光栅的976 nm激光二极管,分析了外延结构和芯片平面结构设计,并着重对内置光栅进行了理论分析和设计,通过技术研究和工艺优化,研制出了满足系统工程应用的激光二极管,其主要光电性能参数如下:中心波长为976±1 nm;光谱半宽小于等于1 nm;中心波长温度漂移系数小于等于0.1nm/℃;输出功率大于等于10W;发光条宽度小于等于100 μm.