大功率LED脉冲位置调制解调设计

脉冲位置调制是室内可见光通信的主要调制方式之一,它具有功率利用率高,频带利用率好,抗干扰性强的特点.为实现室内大功率白光LED照明通信,在分析PPM的原理基础上提出了一种改进的调制方式,给出了这种PPM符号的结构,并设计了大功率LED的驱动电路.其主要特点是由单片机直接输出帧同步信号加PPM信号,不设置保护时隙,其利用...     

DFT Study on Some Properties of Polybrominated Phenoxathiin 10-Oxides

With the B3LYP calculation method of density functional theory(DFT)and the 6-31G* basis set,full optimization calculation was made for phenoxathiin10-oxide(PTO)and 135 polybromine phenoxathiin 10-oxides(PBPTOs)with the Gaussian 03 program and molar heat capacity in constant volume(CVθ)value of each molecule in the standard state was obtained.The relation between CVθ and the substitution position and number of bromine atom(NPBS)was studied,and the results indicated good correlation(R2 = 1.000)between CVθ and NPBS of PBPTO compounds.Based on the output file of Gaussian 03 program,molar heat capacity at constant pressure(Cp,m)of PBPTO compounds from 200 to 1,000 K was calculated with the statistical thermodynamics program,and the correlation equation between Cp,m and temperature(T,T-1 and T-2)was obtained with the least-squares method,and the correlation coefficient of the correlation equation(R2)was 1.000.In addition,based on the partition function of each molecule calculated by vibration analysis,the relative rate constant of formation of each molecule was calculated.     

基于AMESim的双电机消隙伺服系统的仿真分析

在大惯量负载精密跟踪雷达伺服系统中,齿隙会影响系统跟踪精度和稳定性.文中利用AMEsim提供的机械库、电机驱动库、信号库、动力传动库完成仿真模型的建立.通过采用双电机消隙驱动系统,消除了齿隙对跟踪性能的影响.另外,还对影响系统跟踪性能的多个环节进行了仿真分析.AMESim软件在系统设计、调试、验证中起到很好的作用.     

Scanning X-ray interferometry and the silicon lattice parameter: towards relative uncertainty?

In order to reduce measurement uncertainty of the (220) lattice spacing of silicon to a few parts per 10⁹, a combined X-ray and optical interferometer capable of millimeter scans is being tested. A new series of measurements confirmed the value obtained with our previous set-up, and the bounds of measurement uncertainty were investigated. The article supplements the analysis of the error budget and provides a safer footing for the monocrystalline silicon lattice parameter value. Received 13 August 1998     

Capacitive position measurement for high-precision space inertial sensor

Low noise position measurement is fundamental for space inertial sensors, and at present the capacitive position sensor is widely employed for space inertial sensors. The design for the possible suppression of the front-end electric noises for a capacitive sensor is presented. A prototype capacitive sensor with 2×10⁻⁶pF/Hz1/2 at frequency above 0.04 Hz is achieved and further improvements are discussed.      

广西移动智能网业务发展分析

从广西智能网业务的市场需求和存在问题入手，介绍了广西智能网业务的定位，并对现有业务在智能网上与BOSS上开展进行了比较。     

基于磁旋转编码器定位控制系统的研究

文章提出一种磁旋转编码器方法用于热连铸轧钢生产线从卷取机上卸载并输送带钢的小车测控。介绍磁旋转编码器测控系统的原理,包括:磁旋转编码器的工作原理、放大整形电路的设计、倍频电路的设计、单片机接口和测控软件的设计。该系统的特点是能抗恶劣环境、可靠性高、精确度高、结构简单、使用寿命长。     

Two-dimensional position sensitive neutron detector

Pramana - A two-dimensional position sensitive neutron detector has been developed. The detector is a3He + Kr filled multiwire proportional counter with charge division position readout and has a...     

星间光通信振动对系统性能的影响--直接检测PPM调制方式

星间光通信中振动是影响系统性能的重要因素，即使其中一个卫星的瞄准系统的很小幅度的振动也可以引起整个网络的性能急剧恶化。分析了直接检测脉位调制（PPM）下振动对网络性能的影响。     

精密跟踪测量雷达用轴角编码器误差分析及控制

分析了精密跟踪测量雷达用轴角编码器产生测量误差的原因，并结合实际提出了控制测量误差的具体措施。